2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 2.40 LPA
Position: VMC Operator
Education: ITI / DME
Experience: 2 to 5 Years of experience in VMC Operating
Number of Vacancies: 02
Salary : upto 2.40 Lac(s)
Job Profile:
CNC Programming of Fanuc Control System
VMC Programming of Fanuc control system.
Operate VMC and CNC Machine.
Job set up.
Daily production report.
OperateCNC and VMC machine of the Fanuc control system.
Job Location: Chikalthana MIDC, Aurangabad
for more ...
2 Opening(s)
2.0 Year(s) To 4.0 Year(s)
3.00 LPA TO 4.50 LPA
Hiring for Electronic Weighing & Counting Scales Manufacturing Industry Scales
Position: – PCB Designer for R & D Department
Diploma / BE in Electronics
Shall have a min. 2-years experience
Hand on Experience & expertise in PCB Design
No Salary Bar for the right candidate
Position: – Supervisor for PCB Soldering Department
Diploma / BE in Electronics
Shall ...
4 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Hiring for the post of Production Shift Supervisor
Experience: Min 3 Years in CNC Machines Shop
Education: BE Mechanical
JOB PROFILE:-
Daily work management (D.W.M.)and shift handling
Production planning and problem-solving
Rework, Rejection, and line through back monitoring.
Continuous improvement in the process to improve the quality point.
Wey Gauges periodic status monitoring on a monthly bases.
Cost-saving ideas for the improvement of the department.
Looking at the quality-related PM charts.
Ensure 1S-2S on the shop floor.
Daily KAIZEN for improving the process.
KEY SKILL:-
Knowledge about CNC Programming & Supervision.
Knowledge of operating and setting of SPC PM Chart.
Knowledge of RADIAL DRILL & another manual machine.
Knowledge of fixture setting.
Knowledge of MAPAL TOOL & TOOLING Setting.
Knowledge of Special Activities of rework of Crankshaft.
Job Location: Supa MIDC, Ahmednagar
if you are interested kindly send your updated CV on career@paradiseplacement.co.in
for more details call on 9765567505
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.20 LPA
We have a requirement for Purchase/Sourcing Executive,
Position:– Purchase/Sourcing Executive
Qualification: – BE-E&TC
Experience: – 3-5 Years
Salary Budget:- As per Industrial Standard
Required Skill: Import & Local Purchase, New Vendor Development, Purchase Planning
Computer Literacy: Tally Must.
Location: Supa MIDC, Ahmednagar
----------------------------
Paradise Placement Consultancy
Sheetal Capital” Second Floor, Shop.No.11, Opp. YSK Hospital, Chistiya Chowk, N-5, CIDCO, Aurangabad
E-Mail: ...
1 Opening(s)
0 To 1.0 Year(s)
1.56 LPA TO 1.68 LPA
Post: Accounts & Admin Officer
Experience: 0to 2 Years
Monthly Salary: up to 14,000/-
Education: B.com/ M.com / MBA
Job Profile:-
Maintain all records like Vouchers, Receipts, Bills, and Payments.
Bank Reconciliation, Payment Collection.
Monthly GST Working.
Reconciliation of Sundry Debtors & Creditors
Payment follows up by telephonic & mailing
Daily Stock maintains.
Handling petty Cash Records.
Send Quotation and Purchase Order by Busy software as ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 2.60 LPA
Hiring for Japanese oil & Gas Industry at Waluj MIDC, Aurangabad
Position: - HR & Admin Executive
Only Married Female candidates should be applied
Qualification: - MBA HR
Experience: - Min 2 Years Experience in Manufacturing Industry
Salary Budget: up to 20 K
Transportation facility not available
Interview process: Telephonic round / Video conferencing with HO ….
If ...
2 Opening(s)
1.0 Year(s) To 10.0 Year(s)
2.20 LPA TO 3.60 LPA
Hiring for Tool Holder Machine Shop Manufacturing Industry
Position: - Draughtsman Mechanic
Education: ITI Draughtsman Mechanical
Experience: - Min 1 Years experience Industrial Design
Salary: As per industry norms
Job location: - Waluj MIDC, Aurangabad
If you interested kindly send your CV with Subject
----------------------------
Paradise Placement Consultancy
Sheetal Capital” Second Floor, Shop.No.11, Opp. YSK Hospital, Chistiya Chowk, N-5, ...
3 Opening(s)
0 To 3.0 Year(s)
1.44 LPA TO 2.40 LPA
Hiring for Electronic Product Manufacturing Industry at Waluj MIDC, Aurangabad
Position: - Design Engineer 03 (M)
Qualification: - BE Electronics / DEE
Experience: - Min 1 to 2 Years in Electronic product Designing
Freshers can apply
Software: Electronic Design like AutoCAD, Dialux, Revit, ABB E-Design.
Salary Budget: For Fresher 12 to 15 K & Exp. 15 ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 3.60 LPA
Hiring for Upcoming Leading spring Manufacturing Industry at Waluj MIDC, Aurangabad
Position: Production Shift In-charge
Qualification: BE Mechanical
Experience: Min 3 Years in only Spring Manufacturing Industries
Salary Budget: up to 3.60 LPA
Responsibility:
Coiling and Grinding shift Engineer achieving production targets.
Production planning and control, on-time dispatches.
Manpower handling.
Productivity improvement with 100% Quality.
Responsible for inventory control.
Following FIFO throughout the factory.
Responsible for Rejection Control through SOP ( Standard Operating Process )
Calculating OEE.
Working on improving OEE.
Time study and Work-study.
Setting of New product on machine & approve it.
Key tasks handled during the tenure
To monitor & control the effective utilization of available resources in order to achieve Production Target
Production planning and control
Responsible for managing Overall Production, Day-to-Day Production activities & Ensure that Standard Production rates are followed.
Troubleshooting of Process / Production / Product related Problems.
Optimum utilization of resources like man & machine to achieve the production targets on a daily basis.
Guide the operator for various production activities to set the production process.
On line rework rejection monitoring through SOP (Standard Operating Process).
Monitor the Daily Production Report.
Coordination with internal departments like Tool Room, QA, Maintenance, Raw material Stores.
Maintain & Preparation of various documentation required for Quality Systems like TS 16949 & conduct Quality audits for other departments.
Training & awareness given about 5’S’ & safety in the shop floor.
Responsible for the quality in each cell.
Looking after TPM activities on the shop floor.
Maintaining 5S Activities in each cell.
GM BIQS team member.
If you are Interested kindly send your updated CV with applied subject
---------------------
Paradise ...
2 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.60 LPA
Hiring for Tool Room Production Supervisor in Press tool Manufacturing Industry
Department: - Tool Room
Experience: 3 to 5 Years
Responsibilities:-
1 Responsible for Planning of Tool & Dies production
2 Responsible for Tool trial, buy-off & try out.
3 Project Strategy & Capacity planning for new projects
4 Constantly follow up of new tool manufacturing with ...