566 Job openings found

4 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Hiring for Machine shop Automobile, Auto Component Mfg. Industry QMS – Engineer 02 Post Education: BE Mechanical Experience: Min 2 Years in Automobile, Auto Component Mfg. Industry Salary Budget: Rs. 20,000/- to 25,000/- PM Knowledge: All Type of Audit & Documentations Personal skills:  A competent professional in Quality assurance and Quality Management System, process planning and process ...
1 Opening(s)
10.0 Year(s) To 20.0 Year(s)
4.00 LPA TO 5.00 LPA
Hiring Maintenance Manager in MS Pipes & Tubes Manufacturing Industry Position: Maintenance Manager (01) About the responsibilities of the position: The main activity of the responsible for all Maintenance Function in the Plant Educational Qualifications: Bachelor of Engineering in the stream of Mechanical / Electrical. Or Diploma in Engineering in the stream of Mechanical / Electrical Desired Experience: 10 to 18 years experience in a Manufacturing company preferably in ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Required  Automation Engineer for SPM Manufacturer in Aurangabad Position: Automation Engineer (M) Education: Candidate should be BE in Electrical / Electronics / Mechatronics Experience: Should have 1-2 Years of Experience in Similar field Skill: Knowledge in PLC's (Delta, Siemens, and Mitsubishi) must. Should have knowledge in control Panel Designing, Wiring, Testing of Various SPM/ Robo Cells 1.PLC Programming 2.SCADA ...
1 Opening(s)
3.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 3.60 LPA
Post: Senior Maintenance Engineer Education: B.E Mechanical / Electrical and Electronics Experience: Min 5 Years  Job Responsibility: Preventive maintenance and Breakdown Maintenance of All Machine Handling the maintenance (PM  & BM) of CNC & VMC,HMC Machine To do the maintenance of Leak Test Machines Working on POKA YOKE, KAIZEN activities To do the maintenance of SPM machine-like drilling, Tapping, Reaming To do the Troubleshooting and Maintenance of PLC Doing necessary arrangements for the machine parts as per required situations Kaizen for Existing and old machines Followed 1S, 2S and TPM Process during working Maintenance for Utility section - Compressors, Electric reading, on a monthly basis Conducting periodic checks to ensure the performance of various equipment To make Breakdown Reports, PM Reports, Checksheet of Machine. To maintain the records as per (ISO) MTBF, MTTR Installation of a new machine. Job Location: Ahmednagar MIDC  If you are Interested Kindly send your CVs on career@paradiseplacement.co.in For More details call on 9765567506 / 9765567699
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 5.00 LPA
Hiring for the post of Senior Engineer Production   Experience: Min 5 Years in CNC Machines Shop   Education: DME / BE Mechanical    JOB PROFILE:- Daily work management (D.W.M.)and shift handling  Production planning and problem-solving Rework, Rejection, and line through back monitoring. Continuous improvement in the process to improve the quality point. Wey Gauges periodic status monitoring on a monthly bases.  Cost-saving ideas for the improvement of the department.  Looking at the quality-related PM charts. Ensure 1S-2S on the shop floor. Daily KAIZEN for improving the process.   KEY SKILL:- Knowledge about CNC Programming & Supervision.  Knowledge of operating and setting of SPC PM Chart.  Knowledge of RADIAL DRILL & another manual machine.  Knowledge of fixture setting. Knowledge of MAPAL TOOL & TOOLING Setting.  Knowledge of Special Activities of rework of Crankshaft.   Job Location: Supa MIDC, Ahmednagar if you are interested kindly send your updated CV on career@paradiseplacement.co.in for more details call on 7249840333 / 9765567506      
1 Opening(s)
5.0 Year(s) To 15.0 Year(s)
4.50 LPA TO 6.00 LPA
Hiring for QMS / MR/ TPM Manager   Experience: Min 7 Years in Experience in operating the quality management system & Integrated Management System (EMS & OHSAS), TPM, Kaizen, Writing procedures and processes to support the QMS development, internal auditing, and QMS documentation. Salary budget: up to 6.00 LPA   Key Responsibilities :   Preparation and maintenance of the company for IMS (ISO 9001:2015 OHSAS 18001:2007, & ISO ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Hiring QA Supervisor for Manufacturer of Press Shop Position: QA Supervisor 02 Experience: Min 1 Years in any Manufacturing Automobile Auto Ancillary Industry Skills: QA Documentation, Audit Education: Diploma / Degree Mechanical Salary: up to 2.40 LPA Interview Date: 23 & 24 Oct 2019 Job Location: Waluj MIDC, Aurangabad ---------------------------- Paradise Placement Consultancy Sheetal Capital” Second Floor, Shop.No.11, Opp. YSK ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.60 LPA TO 6.00 LPA
Hiring for Metallurgist Manager in AurangabadPosition: Metallurgist Manager   Desired Experience: Min 6 Years experience in a Manufacturing company preferably in a Forge industry, Gears Industry.     Skills Set required:    Selection of samples and Inspection as per defined procedure. Maintain Equipment condition and calibration, Stock of chemicals and consumables in Lab. Metallurgical Analysis for new product development, Competitors product and Failure ...
2 Opening(s)
0 To 2.0 Year(s)
1.20 LPA TO 2.20 LPA
Hiring for Production & Project Engineer    Company Profile: The Company is a reputed name involved in manufacturing and supplying high-quality Conveyors, Flanges, Pressure & Level Transmitters. We are also engaged in providing Electrical Services.    Position:    1. Production Engineer   2. Project Engineer   Education: BE Mechanical & Electrical    Experience: 0 to 2 Years   Salary up to Rs. 16,000/-   Job Location:  Sinnar MIDC, Nasik   Note: local ...
1 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.60 LPA TO 3.00 LPA
 Hiring for Quality In charge of Aurangabad Experience: 2 Years in LG, Whirlpool, HAIER Manufacturer or Handle/face customer audit of LG, Whirlpool, HAIER Salary: up to 3.60 LPA Skills / Responsibility Knowledge of monitoring the Quality process Knowledge of monitoring Line Quality Attend Quality Problems During Production. Having Knowledge of Root cause Analysis and Initiate CAPA. Having knowledge ...

Drop Your CV

We will consider your Profile for future Jobs

Submit Profile