1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
3.60 LPA TO 4.00 LPA
Position: Production (Assembly Line) Senior Engineer (1 No)
About the responsibilities of the position: The main activity of the production Senior Engineer is that he is responsible for all the shop flower activities as peer following job profile. .
Reporting to: Assistant Manager
Educational Qualifications: Bachelor of Engineering in the stream of Mechanical / ...
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
QA Engineer (03No)
About the responsibilities of the
Position: The main activity of the QA Engineer that he is responsible for all the Quality issues
Reporting to: QA Head UACPL
Educational Qualifications: Diploma in Engineering in the stream of Mechanical/ B.E (Mech.)
Desired Experience: Up to 2 to 5 years experience in a Manufacturing company preferably in an Sheet ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
3.60 LPA TO 5.00 LPA
Company Profile :
Manufacturing & Assembling of Automobile spare parts.Manufactures two wheeler chassis, silencer, break peddle, gear change leaver ,swing arm, side and main stand etc Supplies to Bajaj Auto pune. Fully atomized A.C.E.D. and Spray paint shop Fully atomized chassi assembly line.
JOB PROFILE
All ACED&PT paint shop maintenance.
Operating & Maintenance of water treatment plant & DM plant.
Chain type and bearing type conveyor operating and maintenance.
Maintenance of press Machine and pumps.
Hydraulic presser and pneumatic presser system regulator pumps and filters Maintenance.
Tilting unit, Jig fixture and roller system maintenance.
Forklift, Maine and poi let maintenance.
Paint shop work… paint gun[devilbish.poilet.rohansworge]paint and air filter s work .
Oven for hot temperatures maintenance.
Electric and pneumatic screw drivers maintain and repair.
Jig and tilting units repairing and maintenance work.
Pumps work...Centrifuge, hydraulic.pneumatic, screw, paint pump, and all pumps assembly and maintenance work.
Pipe line fitting with all instruments.
Cooling tower maintenance.
Hot water generator preventive and break down maintenance.
Daily weekly and monthly P.M. and all check sheet updation..
Man power handling & work allotment.
Maintenance of major system..
Job Location : Waluj MIDC, Aurangabad
for more details call on 7249840333 /
1 Opening(s)
8.0 Year(s) To 14.0 Year(s)
6.00 LPA TO 7.00 LPA
Maintenance Activities
As a Maintenance Executive (HOD) representative to Plant head (GM)
Maintenance of Plastic injection molding press ,assembly machines, utility machines,tool room machines
Responsible for breakdown targets ,PM planning and execution.
Spare part planning with critical spare and inventory control .
Preparation of maintenance budget with annual shutdown plan budget.
Monitor and control utility operation and its maintenance and ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Maintenance Engineer Mechanical - 01
Education : ITI / Diploma Mechanical / BE Mechanical
Experience : Min 2 Years
Salary : upto 3.00 LPA
Job Responsibility:
Preventive maintenance and Breakdown Maintenance of All Machine
To make Monthly,Yearly Preventive maintenance Plan all Machine as per the schedule.
To make maintenance of Power Press, Milling Machine, Cutting Machine
To make overall maintenance of CNC , VMC Machine
To do the Maintenance of Hass, AMS Make Machine
To Replace LM Guide, Spindle, Ball Screw, Regulating Wheel.
To do the maintenance CNC turning, Gedee Weiler
To Replace the Cylinder Seal, Hyd. Pump Seal, Pneumatic Cylinder
To do the maintenance of SPM machine like Wet end, End touch, Induction m/c.
Doing necessary arrangements for the machine parts as per required situations
Followed 1S, 2S and TPM Process during working
Maintenance for Utility section - Compressors, Electric reading, on Monthly basis
To make Breakdown Reports, PM Reports, Check sheet of Machine.
To maintain the records as per (ISO) MTBF, MTTR
Installation of new machine
Job Location : Waluj MIDC , Aurangabad
for More details call on 9765567699
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
iring for Shift Engineer/Supervisor(Maintenance) in Forging Autocomponent Manufacturer in Aurangabad , Shendra MIDC..
Designation : Shift Engineer/Supervisor(Maintenance)
Education : DME / BE Mechanical
Must Required experience - Forging Experience
Working as Maintenance engineer in shifts MIC (maintenance in charge)
to handle Breakdown and Preventive Maintenance of Machines like,
Mechanical Press (8000T and 1600T), Disa shot Blasting machine,
Megnaflux machine, Reduce Roll, Induction Billet Heater Coils,
Band Saw machine, Descaler Bare Pump,
Conveyors like Cooling conveyor, Flash conveyor, Drop-out conveyor,
Fanuc Robots
To ensure daily maintenance problems communication to the next shift reliever
Independent Maintenance handling
Preventive, Break down maintenance.
Experience : Min 3 Years
Candidate from Forging Shop.
Final CTC- 3.60 Lacs
For more details call on 7249840333
Job Location ...
10 Opening(s)
1.0 Year(s) To 7.0 Year(s)
1.50 LPA TO 4.50 LPA
Client Details:
Our client is a political consulting firm working closely with leading political parties and governments in strategizing, ideating and implementing large-scale political campaigns and government initiatives. We are a young and enthusiastic team, which aims to build a leading political consultancy firm in the country. Members of the team are ...
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Daily production planning and target achieving as per plan.
Manpower handling solving customer complaint.
Daily model wise production planning.
Daily rejection analysis and root cause action report making and preparation of CAPA for any assembly defect.
Involve in implementation of kaizen at work station.
Familier with co2 ,spm and robotics welding, seam welding
Daily meeting taking ...
15 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.50 LPA
Hiring for VTL Operator in manufacturing Group
Company Profile : Company was founded in 1983 and is India's largest and most reputed manufacturer of Electrical Steel Laminations, Motor Cores, Sub-Assemblies, Die-Cast Rotors and Press Tools. We have already diversified into manufacturing of Castings, Steel Fabricated Parts and machined components stator and rotor ...
4 Opening(s)
5.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 5.00 LPA
Sr. Engineer QA (04 No)
About the responsibilities of the
position: The main activity of the QA Engineer that he is responsible for all the Quality issues/Parts parameter checking.
Educational Qualifications: B.E (Mech.),B.SC Chemistry, M.SC Chemistry
Desired Experience: Up to 5 to 8 years experience in a Manufacturing company preferably in an Automobile industry.
Skills Set ...