CNC BENDING MACHIN OPERATOR - DUBAI
1 Nos.
84283
Full Time
2.0 Year(s) To 3.0 Year(s)
5.00 LPA TO 5.40 LPA
Steel/Metal/Iron/Non-ferrous
Other - Other
Job Description:
Job Description:
- 1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
- 2) Positions and clamps end stops on machine to set specified location of bend.
- 3) Inserts or screws plug stops into guide wheel to set specified degree of bend.
- 4) Positions workpiece against end stop.
- 5) Locks holding clamp and guide clamp onto workpiece.
- 6) Lubricates workpiece with oil.
- 7) Starts turntable that draws workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.
- 8) May slide mandrel into tubing instead of using guide clamp.
- 9) May preheat workpiece, using hand torch or heating furnace.
- 10) May use hand-powered bending machine for short runs.
- 11) May fill tubes or pipe with sand, resin, or lead to prevent wrinkling or collapsing during bending operation.
- 12) May heat tube, using torch, and manually bend tube or pipe around forming blocks.
- 13) May flare tube ends, using tube flarer and cut or trim metal stock to length, using power shears or saws.
- 14) May be designated according to type of stock bent as Pipe-Bending-Machine Operator; Rod-Bending-Machine Operator I; Tube-Bending-Machine Operator I.
Key Skills :
Company Profile
MSGI is the national leader of metallic construction and galvanization --- and services. Founded in 1985 by Mr Lotfi Mellouli in Sfax, Tunisia. Specialized in framing, pylons, power towers, poles and mats of public and stadium lighting.
Apply Now
- Interested candidates are requested to apply for this job.
- Recruiters will evaluate your candidature and will get in touch with you.