493 Job openings found

27-02-25   HPS/2025/124 Blown Flim Male 15 0 to 1 10th/12th/DME Machine setup and operation: Load plastic resin into the extruder hopper. Adjust machine parameters like temperature, pressure, and die settings to achieve desired film thickness and properties. Initiate the blown film process, controlling the air pressure to inflate the film bubble. Monitor and adjust machine settings based on quality control checks. Quality ...

27-02-25   HPS/2025/123 Bag Making Operator Male 20 0 to 2 10th/12th/DME Machine setup and operation: Load raw materials (film rolls, paper stock) onto the machine according to bag specifications. Adjust machine settings to control bag size, sealing pressure, and cutting parameters. Start and monitor the bag making machine to ensure smooth production. Perform necessary adjustments to maintain consistent quality. Quality control: Regularly inspect ...

22-02-25   HPS/2025/100 Simec Resin Line Operator Male 1 2 to 5 10th/12th/ITI/DME Line Operators are responsible for assisting with various processes being completed along production lines. Usual activities listed on a Line Operator resume are handling heavy machinery, maintaining equipment, keeping records, following production schedules, and making sure final products meet quality standards. Based on our selection of example resumes, eligible ...

22-02-25   HPS/2025/99 Gang Saw Operator Male 1 2 to 5 10th/12th/ITI/DME Operating the band saw: Load materials onto the table, adjust cutting parameters (blade speed, feed rate), and operate the band saw to make precise cuts according to blueprints or work orders.    Quality control: Regularly inspect cuts for accuracy, dimension, and surface finish, ensuring adherence to quality standards.    Material handling: Securely load ...

22-02-25   HPS/2025/98 Arm Crane Operator Male 1 1 to 2 10th/12th/ITI/DME Operating the crane: Manipulating controls to precisely lift, lower, rotate, and position heavy loads using the crane's articulated arm, ensuring accurate placement.    Pre-shift inspections: Performing thorough daily safety checks on the crane, including arm functionality, hydraulics, and lifting capacity, to identify potential issues.    Load calculations: Determining the weight of loads and ...

22-02-25   HPS/2025/97 Gantry Operator Male 1 1 to 3 10th/12th/ITI/DME Operating the crane: Maneuvering the gantry crane to position it accurately for lifting and moving loads, including controlling the hoisting mechanism to raise and lower materials.    Load securing: Ensuring loads are properly secured to the crane hook before lifting, verifying weight limits and stability.    Signal communication: Following hand signals from ground personnel ...

22-02-25   HPS/2025/96 EOT Operator Male 1 1 to 3 10th/12th/ITI/DME responsible for safely operating an overhead crane to lift, move, and position heavy loads within a factory or warehouse setting, ensuring proper load attachment, adherence to weight limits, and maintaining clear communication with other workers on the ground while following strict safety protocols; their duties often include daily ...

21-02-25   HPS/2025/91 Civil Engineer Male 1 0 to 1 DME Civil Design and analyze the structural components of buildings, bridges, and other construction projects Design and maintain transportation systems, including roads and airports Plan and design the framework for construction projects, including embankments, canals, roads, and buildings Create project blueprints using computer modeling software and data from surveys, tests, and ...

21-02-25   HPS/2025/90 Safety Engineer Male 1 0 to 1 ITI/DME/Safety Incident investigation: Determine the causes of accidents and near-misses, and develop corrective actions    Hazard identification: Use risk assessment and other methods to identify potential safety hazards    Safety protocol development: Create safety plans, procedures, and response plans    Safety communication: Communicate safety solutions to employees, supervisors, and other stakeholders    Safety culture promotion: Ensure that safety standards are met ...

17-02-25   HPS/2025/83 Quality Engineer Male 1 0 to 1 ITI/ DME Testing: Test products and systems to ensure they meet specifications and standards Problem solving: Investigate and fix issues, and develop corrective actions Documentation: Document inspections, analyses, and improvements Reporting: Prepare reports on quality and performance Training: Provide training to quality assurance teams Process improvement: Review processes to identify and implement improvements Compliance: Ensure products comply with regulations and standards Risk ...