1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 4.00 LPA
Experience of teaching & programming an ABB, Panasonic robot.
Trouble-shooting & modification of Allen-Bradley Control Logix PLC programs, Mitsubishi PLC program.
Good knowledge of Allen- Bradley PLC5, SLC.
Working on servo motor and it's drive (Mitsubishi servo system).
Modification in electrical panel and PLC programs for eliminate the breakdown.
Looking over all the maintenance robots, ...
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
8.00 LPA TO 10.00 LPA
Reduced rework percentage by taking in-process audit and mfg. audit.
Work as per the guideline of TPM/TS
Development and mfg. jig and fixture and establishment for production
Decided optimum cycle time for hydraulic and pneumatic testing
Co-Ordinate with PPC department for smooth production running
Set the robotic line as per the targets and balance the bottle neck operation
Overcome all the minor abnormality related to fixture during trial.
Set the TPM target for quality, maintenance, stores and production.
Arrange for all resources including raw materials, man power and facility required.
Handling overall press shop production for daily production targets
Overall responsibility of welding sub assembly of floor board and running board assembly
PROCESS follows with safety and through with safety and work permits.
Achieving the planned targets without Compromising the quality and quantity
Working as per various standards like ISO9001&Tsi6949-2002 system
Preparation of daily & Monthly reports
Co-Coordinating with Stores, QC, QA, Maint .In day to day activity
Awareness of seven QC tools to improve quality problems
Handling 4M for achieve desired production targets
Job Location : Waluj MIDC Aurangabad
For more details call on 9765567509
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
Good Knowledge of CNC Programming / Operating
Good Knowledge of Jig Fixture
Operation of all Conventional, NC, and CNC machines in tool room.
Tool Jigs & Fixture, etc.
Manufacturing processes & process planning.
CNC programming of HAAS, SIEMENS & FANUC controls.
Hands on experience of CNC Prog. & machining (HAAS, FANUC, SIEMENS, ROBOFILL, ELECTRONICA, CHARMILLS TECH., AGIE-CHARMILLS SRP EDM CONTROLLS).
Process sides maintain all parameters on daily basis, implementation of GAUGE R&R system, PDCA & FMEA activity.
Implementation of KAIZEN.
Total manufacturing process i.e. CAM software, CNC operation, imaging, plating etching, masking, HAL or solder process, BBT and FQC.
Conduct trials for new supplier /new Machines and process validationof this product /Machine.
Check and maintain all documentation on daily basis.
Daily rejection, rework analysis and production analysis by maintaining records of production, rework, rejection, downtime and absenteeism, prepare shift production summary.
Job Location: Waluj MIDC, Aurangabad
for More details call on 7249840333
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
8.00 LPA TO 10.00 LPA
Position: Purchase Head / Manager
A dynamic professional experience with Internal Auditor for ISO/TS, TPM 5S, Six Sigma, Kaizen etc organisation in Procurement, Global and Local Sourcing, New Vendor Development, Purchase of Direct and circumlocutory material. Expertise in Material planning, Commercial Negotiation, Material Sourcing, Alternate cost effective Purchasing .Techno commercial approach towards ...
2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Documentation of Manufacturing audit & System Audit
Inward Inspection Of raw material and records concern with it
Assuring quality by monitoring In process & Final inspectors.
Attain Customer Complaints.
Follow standard operating procedure, manual & work instruction for production operation for the unit.
Carried out the process of internal auditing, monitoring.
Reduce the rejection level & ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 3.60 LPA
@ Keeping control on day to day activity. And documentation
@ Sales order creation.
@ Total Dispatch sends as per FIFO System.
@ Deliveries to Customer along with Acceptance.
@ Managing Transport vehicles for Dispatches.
@ Bin Reconciliation & Transport Bill Checking.
@ Transport Cost saving every month review.
@ Preservation and monitoring the ...
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.50 LPA
Implement all TS & ISO related Documents.
Critical spare part management, Development of local vendor .
All Govt. related activity of Electrical, EHS related paper.
Working on new cost cutting project, Kaizen & implementation.
Maintenance of 3 Axis CNC Pipe bending machine, Assembly line Conveyor
Maintenance of Weld shop containing Nash make Butt welding, Spot ...
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.50 LPA
Handling PT Cash Daily Voucher In Tally
Prepared Vouchers, Banking, Billing.
Preparing sales invoices & the upkeep of an accurate accounts filing system.
Preparation and input of month end journal vouchers.
Inputting, matching, batching and coding of invoices.
Preparation of various reports for senior managers.
Responsible for financial accounts including budgets and cash-flow.
Inputting of supplier invoices ...
2 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 3.00 LPA
Maintenance plan & Preventive maintenance activity for m/c like VMC, CNC, HMC, CNC, Furnace, Forging M/c, Milling M/c, Tool Maintenance, Lathe, Capstan, Straightening, Pilling, Swaging, Band saw,Draw-bench etc.Attending Regular operation About Utility; like- D.G. set of 750 KVA; 500KVA; Compressor (Atlas Capco, Kaiser); cooling tower.Changeover of MSEDCL supply to D.G. set.Working ...