1 Opening(s)
5.0 Year(s) To 6.0 Year(s)
5.00 LPA TO 6.00 LPA
Job Description
Project Name RE-60 MAXIMA
Department: TOOL ROOM
Designation: ENGINEER
EXP. REQ. 5 - 6 YRS
Qualification: DIPLOMA
Place: -3K Aurangabad
Job Skill required:
1 KNOWLEDGE ABOUT TPM, ISO, OHSAS & IATF.
2 KNOWLEDGE ABOUT VIBRATION, WELDING FIXTURE MAINTENANCE.
3 KNOWLEDGE ABOUT INJECTION MOULDING.
Roles and responsibilities:
1 To follow the instructions given by respective HOD.
2 Maintain mould history card & ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 5.00 LPA
Responsibility:
To maintain the entire documentation as per cGMP and ISO 9001:2015 on daily and fortnightly basis. To supervise the Shift Inspector and Assembly Supervisor. To prepare necessary documentations for new product development trials. Responsible for auditing OPC and preparing the related documents. Responsible to take the trials of new ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 4.00 LPA
Job PurposeThe main purpose of the role is to bring down breakdown time through properpreventive maintenance and spares control, energy consumption. Responsible for allthe repair and maintenance of the machine in the Unit.
Responsibility:
To check the Daily Routine Maintenance Checklist on daily basis for verification of all themaintenance of machines ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
18.00 LPA TO 20.00 LPA
Position: Production Head
Location: Pardi- Valsad
Experience: 10-15 Years
Industries: Rubber - Pharma Packaging
Responsibilities:
Responsible for the entire rubber moulding division of Rubber stoppers, flip off seal, vial closures
Supervision, reporting, monitoring and responsible for overall production.
To carry out production as per given planning.
Handling all activity of ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
3.00 LPA TO 4.00 LPA
B.TECH in Mechanical Engineering
Experience of 2-3 years in rubber injection moulding manufacturing industry.
Maintaining all process parameters of machine and equipment as per the instruction from time to time to control rejection rate.
Optimum utilization of manpower to meet the targets.
Training of injection moulding operators, SR. operators of work practices.
Supervision of manpower ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
6.00 LPA TO 10.00 LPA
Performing calculations of manufacturing costs and financial analyses in the RFQ/development phase through to handover to the factory.
Tracking project profitability, including manufacturing costs, investments, and development costs, until series production (SOP).
Evaluation of changes (internal/external) and modeling of corresponding calculations and business cases, including manufacturing costs, investments, and development costs.
Preparation of ...
3 Opening(s)
1.0 Year(s) To 2.0 Year(s)
3.00 LPA TO 3.60 LPA
Job Description
27/04/24
HPS/2024/260
Quality Engineer -Leo Plastic
Male
3
1 to 2
ITI/DME
Responsible for doing Process Audit, Product audit.
Lay Out Inspection.Improve Quality including Incoming, In-process and Final productZero PPM and Zero Customer complaintsMust worked with injection Moulding co
RoleQuality Assurance/Quality Control Manager
Industry TypeChemicals, PetroChemical, Plastic, Rubber
Functional AreaProduction, Manufacturing, Maintenance
Employment TypeFull Time, Permanent
Role CategoryProduction/Manufacturing/Maintenance
Key Skills
Quality AuditCustomer QualityPlant QualitySupplier QualityQMSQuality AssuranceInprocess QualityQuality Control
11 Opening(s)
1.0 Year(s) To 2.0 Year(s)
3.00 LPA TO 3.60 LPA
Job Description
27/04/24
HPS/2024/259
Quality Engineer - LPPL
Male
11
1 to 2
ITI/DME
Responsible for doing Process Audit, Product audit.
Lay Out Inspection.Improve Quality including Incoming, In-process and Final productZero PPM and Zero Customer complaintsMust worked with injection Moulding co
RoleQuality Assurance/Quality Control Manager
Industry TypeChemicals, PetroChemical, Plastic, Rubber
Functional AreaProduction, Manufacturing, Maintenance
Employment TypeFull Time, Permanent
Role CategoryProduction/Manufacturing/Maintenance
Key Skills
Quality AuditCustomer QualityPlant QualitySupplier QualityQMSQuality AssuranceInprocess QualityQuality Control
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.50 LPA TO 1.92 LPA
Position: QC Officer
Location: Vapi
Experience: 1– 2 Years
Industries: Plastic
Responsibilities:
Line clearance during manufacturing and packing activities.
Testing of incoming material (RM & PM), Semi-Finished and Finished Goods as per specification.
IN process Inspection.
Redispatch Inspection.
Preparation of dimensional report.
Shift Handling.
Attending Customer place.
Preparation ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
Job Description
04.04.24
HPS/2024/185
Quality Engineer
Male
1
2 to 3
BA/Cipet
Responsible for doing Process Audit, Product audit.
Lay Out Inspection.Improve Quality including Incoming, In-process and Final productZero PPM and Zero Customer complaintsQMS IATF 16949:2016 systemMust worked with injection Moulding co
RoleQuality Assurance/Quality Control Manager
Industry TypeChemicals, PetroChemical, Plastic, Rubber
Functional AreaProduction, Manufacturing, Maintenance
Employment TypeFull Time, Permanent
Role CategoryProduction/Manufacturing/Maintenance
Key Skills
Quality AuditCustomer QualityPlant QualitySupplier QualityQMSQuality AssuranceInprocess QualityQuality Control