1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job description
13.05.24
HPS/2024/288
Painting Operator 5 colour Printing machin Operator Heidleberg
Male
1
1to 2
12th / ITI Fitter
Painting and coating machine operators set up and run machines that coat or paint products. Painting and coating machine operators control, clean, and maintain their machines. These machines apply coatings and paints to a wide variety of products
10 Opening(s)
5.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
JOB DESCRIPTION
07/08/24
HPS/2024/476
Machin Operator
Male
10
5 to 6
Any Graduation
We required machine operator with extrusion line for 12 hrs.duty.
Also one engineer 5 to 6 years experience in production on extrusion machine with maintenance.
Role & Responsibility :-
Carry out production, inspection, and machine operator duties
Setup machinery for dally operations and ensure all materials are readily available
Effectively ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
5.00 LPA TO 5.40 LPA
Job Description:
1) Sets up and operates machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
2) Positions and clamps end stops on ...
60 Opening(s)
0 To 2.0 Year(s)
1.80 LPA TO 2.28 LPA
JOB DESCRIPTION
28.05.24
HPS/2024/325
Machine Operator (SMPS)
Male
60
0 to 2
Any Graduation
Profile : Machine Operator (SMPS)
Furnace operatorStraightening machine operatorTube Mills operator. Also required.
A Machine Operator is responsible for monitoring, maintaining and operating warehouse equipment.
They are also responsible for cleaning and quality-checking their machinery to ensure everything works as it should.
12 hours Duty
Bus Facilities
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
HPS/2024/474
CNC Machin Operator
Male
1
1 to 3
ITI Fitter
The candidate should be ITI / Diploma (Mechanical) with minimum 2 years of experience in operation / programming of CNC Machines (CNC Vertical Turning Lathe, HMC, VMC & Turning Centre) on FANUC & SINUMERIK Control.
Knowledge of operating / programming of CNC machines on Fanuc control (Turning Centre ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Observe machine operations to ensure quality and conformity of filled or packaged products to standards.Adjust machine components and machine tension and pressure according to size or processing angle of product.Tend or operate machine that packages product.Remove finished packaged items from machine and separate rejected items.Regulate machine flow, speed, or temperature.Stop ...
5 Opening(s)
0 To 2.0 Year(s)
1.44 LPA TO 1.80 LPA
JOB DESCRIPTION:
18.06.24
HPS/2024/352
Machin Operator
Male
5
0 to 2
ITI / B.Sc Cipt
A Machine Operator is a professional who is responsible for operating their assigned machinery. They ensure their machine runs smoothly, works at capacity without issue and is appropriately maintained.
Responsibilities
Set up machines (calibration, cleaning etc.) to start a production cycle
Control and adjust machine settings (e.g. speed)
Feed ...
1 Opening(s)
0 To 1.0 Year(s)
1.44 LPA TO 1.80 LPA
Job Description
21.05.24
HPS/2024/305
ITI Fitter
Male
1
0 to 2
ITI Fitter
A Fitter, or Pipe Fitter works on a construction site to install industrial pipework in factories and large buildings. Their duties include installing and repairing pipes using welding methods, completing jobs on time and ensuring safety on a job site.
1 Opening(s)
0 To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
21.05.24
HPS/2024/305
ITI Fitter
Male
1
0 to 2
ITI Fitter
A Fitter, or Pipe Fitter works on a construction site to install industrial pipework in factories and large buildings. Their duties include installing and repairing pipes using welding methods, completing jobs on time and ensuring safety on a job site.
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
26/03/2024
HPS/2024/174
Fitter
Male
1
5 to 8
ITI Fitter
Fitter : we need a guy who is having 5+ years of experience in extrusion machine maintenance work. He also should have worked on maintenance of all type of gearbox, centrifugal pump, reciprocating aur compressor,mixer,grinder,cutter machine.
Hours - 12 Hours
A Fitter, or Pipe Fitter works on a construction ...