1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Maintenance Shift In charge
Education: DEE / BE Electrical
Experience: Min 6 Years in Rolling Mill / Steel Industry
Job Profile: Working in a general shift, make daily job planning, manpower planning as per rolling section.
Responsible for doing pm-1(preventive maintenance) jobs .shift schedule and daily checklist follow-up,
Responsible for Electrical & Automation Maintenance of 600-meter long HAPL Line consist of Entry section, RCM Welder,6-HI Cold / Hot Rolling Mill, Furnace, Scale Breaker, Shot- Blaster, Pickling, Entry-Mill & Exit Loppers & exit Section.
Responsible for handling all maintenance related activities of ABB PLC's,AC Drives,AC Motors and DCS 800xA System and LT and HT switch Gears used in the plant
Knowledge in logic solving in control panels & various interlocking schemes required for automation and analyzing all drawings related to automation & control systems.
Instrumental in coordinating with various internal departments and contractor personnel for safe execution of shutdowns and ensuring implementation of routine/preventive/breakdown maintenance schedules of the system to increase machine uptime, equipment reliability thereby.
Responsible for maintaining 5S activity & safety measures regularly
To co-ordinate with the Electrical contractor for Execution, Erection, and Commissioning
Basic Knowledge of Sheet CENTER GUIDE and STEERING UNIT, EDGE System provided by EMG.
Knowledge of hardware Communication between Drives, PLC and HMI’s through Fiber Optic and Profibus.
Knowledge of Gauge Measurement system provided by IMS used at 6 HI in Line Mill.
Responsible for keeping a record of the daily power consumption, daily delay report, spare parts list of the plant.
Basic Knowledge about Control-Logix / Compact-Logix systems of Allen-Bradley PLC (Rockwell Automation).
Identifying NetLinx networks for use in a Logix5000 System used for in-line Welder.
Successfully accomplished Erection, testing, Commissioning of ARP System(Acid Recovery Process
To maintain records, logbook for the job carried out.
Organize safety meetings & give on the Job training to my subordinates
To ensure good housekeeping in the area and the shop floor.
Take participate in IMS internal audit and prepare all supporting document
To maintain a record of bypass of trip & interlock as per the procedures.
Working on SAP (Plant Maintenance Module).
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
For more details call on 7249840333 / 9765567506
Send CV on career@paradiseplacement.co.in
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Quality Lab Chemist
Education: Bsc / Msc Chemistry
Experience: Min 5 Years in Steel Industry / Rolling Mill
Job Assignment in Lab :
• Checking the specification percentage in the coolant, measuring the oil concentration, Checking the Cl, Fe Percentage in mill Process, Inspection the Final Rolling On Mill Process.
•Checking the CGL Line Zink Bath Testing
•Daily Reporting Process Control, Reporting The SOP Process
•Working In 5 ‘S’ Process
Job Assignment in CGL line:
•Checking the steel sheet, Checking Hardness HRB & VPN, Bend testing, LFQ (long farming testing), measuring the thickness & width, Defects on Sheet, Checking the Zinc Coating, Checking The I Value.
•Clearing the Quality CGL Line in SAP
•Reporting the SOP Process
Job Assignment In CRM Line:-
•Checking the steel sheet, Checking Defects on Sheet, Measuring the thickness & width.
•Clearing the Quality CRM Line in SAP.
•Reporting the SOP Process.
Water Test: PH, Alkalinity Hardness, Conductivity, Chloride, HCN, Total NH3, Phenol, C.O.D., B.O.D.,D.O, Oil & Grease, Mlss, Mlvss, TDS, SS, Sulphaide, Phosphate.
By Product: Tar Moisture, Tar Dust & Tar Fog, TI, and BI.
Gas Analysis orsat apparatus CO2, CmHn, O2, CO, CH4, and H2.
Estimation of NH3, H2S, Naphtha.
Coke & Coal Ash: Estimation of Coke & coal ash:
SiO2, Al2O3, CaO, MgO.
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
for more details call on 7249840333 / 9765567506
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Position: Quality Engineer -CMM The main activity of the QA Engineer that he is responsible for all the Quality issues/Parts parameter checking (CMM).
Educational Qualifications: Diploma or Engineering in the stream of Mechanical
Desired Experience: Up to 3 to 4 years experience in a Manufacturing company preferably in an Automobile industry.
Skills Set required/Job ...
1 Opening(s)
8.0 Year(s) To 12.0 Year(s)
4.00 LPA TO 6.00 LPA
Job Responsibilities.
Purchase Department
•Responsible for procurement of Raw Material 15B25,20MNCR5.EN8D, EN9 (Black bar)
•Handling forged & cast with machined components like cost finalization for same.
•Strategic decision making for new part & supplier development like SOB, alternative sourcing, stocking agreements etc.
•Development of new vendors for forged & cast for sub-contracting.
•Development of new parts.
•Experience in supplier auditing.
•Determining appropriate methods of procurement/subcontracting & performing a cost-benefit analysis.
•Supply chain management(Daily business)
•Monitoring & controlling purchasing as per budget.
•Preparation of cost sheet.
•Make efforts to establish reliable sources of supply goods & services for project procurement.
•Source improvement & process optimization thus aiming at cost reduction & savings.
•Planning & scheduling follow up & maintaining the smooth flow of all materials.
•Responsible for procurement of All Consumable Material (Shafts, Axles, Bushes, Gears, Pinions, Sleeves, Hubs, Sprockets, Aluminum PDC Parts).
•Responsible for procurement of All Tooling Material
•Handling 3000 items. With more than 350 vendors.
•Finalizing the rate & release purchase order(Raw Material, Consumable, Fixture, Gauges & Tooling).
•Issue of Purchase Order.
•Amendments Of Purchase Order(POAM)
•Vendor Master- Info Records, Source List, and Quota Arrangement.
•Routine activities of Purchase Department.
•Monthly Purchase Budget Planning
•Procurement of Material as per Purchase Plan.
•Preparing consumption raw material sheet as per model wise.
•Rate Different (Debit & Credit) Note Processing.
•Getting on time delivery from suppliers and better inventory management
•Total bill passing for all material.
•Development of new vendors for forged & cast for sub-contracting.
•Product costing, vendor payment, supply schedule, release of purchase order
•Co-ordination with vendors & team work.
•Involved in all audits functions like QMS,EHS,OSHAS,SAFETY,INVENTORY STOCK.
Supplier Relationship Management
•Controlling supplier performance by rating system & regular assessments.
•Resolving contractual disagreements with suppliers & escalating as & when required.
•Resolve quality issues through development of quality measurements.
•Developing & managing effective with other internal departments
Job Location: Waluj MIDC, Aurangabad
Send CV on Career@paradiseplacement.co.in
for more details call on 9765567506/505
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.20 LPA TO 2.40 LPA
Job Description:
Hiring for Store officer in Aurangabad.
Min 2 Years Experience in Auto Mobile / Auto component Manufacturing Industries
Handling workers for labeling, packing and Material Unloading and loading
Transfer stock location to location
Physical material stock checking
Handle day to day production report independently
Prepared monthly/yearly MIS report & submit to Top Management
Day to day ...
3 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.40 LPA
Post: Production Supervisor
Vacant Post : 3 Nos.
Interview Date:- 29 to 31 Aug. 2018
Job Profile:
Operating / programming of VMC,CNC, maintain 5S
Supervision and shift handling
Implement 5s and kaizen related activities
Improve cycle time for a no.of job in production
working vmc Vertical (G17) and Horizontal
Responsible for production norms & with Quality for every operation.
Responsible ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
2.50 LPA TO 3.00 LPA
Hiring for Tool Room Engineer
Exp: 5-6 yearsResponsibility:
Operating of VMC,CNC,maintain 5S
Supervision and shift handling
Implement 5s and kaizen related activities
Improve cycletime for no.of job in production
working vmc Vertical (G17) and Horizontal
Job Location: Waluj MIDC, Aurangabad
for More details call on 9765567506
Send your CV on career@paradiseplacement.co.in
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 3.00 LPA
Post: Officer Health & Safety
Salary: upto 3.00 LPA
Job Profile:
The Officer Health & Safety under the directions of Director (HR&PR) is responsible for ensuring that all Health and Safety activities across the various business units and sites are coordinated and consistent with S&H Policy. He is responsible for providing all personnel of the ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
0.00 LPA TO 2.40 LPA
Job Description:
Designation: Production supervisor.
(Production Supervisor for compression division Plastic Moulding.)
Educational Qualification: Diploma/CIPET
Knowledge: Required knowledge of compression mounding
Experience: 1 to 2 Yrs. in production department
Documentation: Working knowledge of PC & fill up all production related documents
Salary: CTC 14000/ to 20000/- PM
Job Location: Waluj MIDC, Aurangabad
For more details call on 9765567506
1 Opening(s)
0 To 1.0 Year(s)
0.96 LPA TO 1.30 LPA
Post : Quality Trainee Engineer
Experience : 0-1
Job Profile:
Handles Quality Documents as per Customer Requirement .
Handles Customer Complaints
Preparation of IPO & SOP for different Manufacturing Processes involved.
Responsible for 1S 2S Audits in order to create a better & Organized Workplace.
Daily Rejection Analysis & Subsequent report generation & its presentation.
Job Location: Shendra MIDC, Aurangabad
for more ...