1 Opening(s)
2.0 Year(s) To 8.0 Year(s)
3.50 LPA TO 4.00 LPA
Key Responsibilities:1. Mould Design & Development Study part drawings and 3D models of plastic components to design the correspondinginjection moulds. Develop complete mould designs including core, cavity, sliders, lifters, ejectors, coolingsystems, and gating layouts. Ensure mould design feasibility considering mould flow, shrinkage, draft angles,venting, and parting line aspects. Design 2-plate, ...
2 Opening(s)
4.0 Year(s) To 7.0 Year(s)
4.00 LPA TO 6.00 LPA
Position Title: Engineer / Senior Engineer – Mould Maintenance
Key Responsibilities
1. Mould Maintenance & Troubleshooting
Execute preventive, breakdown, and corrective maintenance on complex plastic injection moulds.
Inspect, polish, repair, and clean mould components such as cores, cavities, sliders, ejector pins, and guide pillars.
Diagnose and troubleshoot Hot Runner systems, manifold systems, and sequential valve ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
4.50 LPA TO 6.00 LPA
Hand on experience in production, quality and maintenance related task, production & controls.
Monitoring and supporting for various new projects assigned to team members.
Setting of initial machine operation parameters for the start-up & shutdown.
Making and ensure adherence of preventive maintenance schedule of machines.
Analysis breakdown, diagnosis fault, poor performance of machine & quality defects.
Chillers, MTC, cooling tower, compressor, dryer, dehumidifier, water pumps, Air dryer, Diesel Generator.
Capable to new mould, new colour ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 8.50 LPA
Process Improvement through Kaizen Activities on Shop Floor.• To develop the gauges & fixtures for New Part.• Joint Inspection with customer for approval of part for mass production.• Sample Preparation & timely submission to customer.• PPAP Lot Run & Submission as per the timeline given by customer.• Responsible daily , ...
1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
15.00 LPA TO 16.00 LPA
.Distribution of work load to operators in order to achieve daily production target.
.Planning day to day production to achieve maximum production.
.Organizing daily work at shop floor.
.Working on CLF Injection Moulding System of various types of tonnage capacity like TX 750T,400T,230T,120T 285T,225T, Kabra Blown Film Extrusion, Stretch Film Extrusion.
.Handling DG Like ...