1 Opening(s)
0 To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
26/03/2024
HPS/2024/175
Operator (Sheet Line)
Male
1
0 to 2
Any Graduation
Operator: we also need operators for Sheet line. Those who have worked on Plastic sheet line like HIPS, ABS material. And we also need one for PET machine too.
Some common duties include operating machinery, troubleshooting issues, and monitoring production.
Line operators are also responsible for inspecting ...
2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
Not Disclosed by Recruiter
Position: Pet Ward Boy / Ward GirlLocation: KharSalary: Depends on the Experience and Skills
Responsibilities:
Animal Care: Provide compassionate care and assistance to animals admitted to the pet ward, including feeding, grooming, and administering medications as directed by veterinary staff.
Ward Maintenance: Ensure cleanliness and hygiene of animal enclosures, bedding, and common areas within the pet ...
2 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 4.00 LPA
Should able to perform and supervise following routine tests of general chemical nature:-
Acidic/Alkaline strength of various solutions
Preparation of solutions for standardization
To find metal content such as copper, iron etc. of powders
To perform all tests on water i.e. pH, TDS, TSS, harnesses, alkalinity, BOD, COD etc.
Should have very good knowledge of ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.20 LPA
03-05 YEAR EXPERIENCE.CANDIDATE MUST BE DET/GET,B.TECH MACHANICAL AND HAVE GOOD COMMUNICATION SKILL.GOOD LEARNER
Daily Incoming material Inspections, Steel components, As. (Lunch box ,
Casserole ,water bottle , water cooler ) Plastic components. Master carton Ect.
Injection molding component final inspection.
Daily Iqc Rejection
Monthly Vender reating
Working Instauration Knowledge.
Daily vender Visit.
Micro Test Lab
Daily Printing Department ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
5.00 LPA TO 6.00 LPA
Responsible for the production of moulded parts as per given quality norms ,meet production target within the defined resources.
Collaborate with Supply Chain, Quality Assurance, Manufacturing Engineering and Product Support Engineering teams to ensure the highest level of product quality and consistent material availability.
Coordinating and job allocation to M/Cs and subordinates, Trouble shooting ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
JOB DESCRIPTION
16/02/2024
HPS/2024/65
Extrusion Film (Production Engineer
Mle
1
2 to 5
DME
Responsible for planning, setting, and reviewing machine parameters at the time of mould changeover or machine startup.
Responsible for Quality Inspection of extrusion moulded PVC Pipe and casing. Responsible for training and guiding operators in the shift.
Must have complete knowledge of Cutting, Sealing and bag ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
12/02/2024
HPS/2024/60
Quality Engineer
Male
2
1 to 3
B.Sc (Chem)/Cipet
Responsible for doing Process Audit, Product audit.
Lay Out Inspection.Improve Quality including Incoming, In-process and Final productZero PPM and Zero Customer complaintsQMS IATF 16949:2016 systemMust worked with injection Moulding co
RoleQuality Assurance/Quality Control Manager
Industry TypeChemicals, PetroChemical, Plastic, Rubber
Functional AreaProduction, Manufacturing, Maintenance
Employment TypeFull Time, Permanent
Role CategoryProduction/Manufacturing/Maintenance
Key Skills
Quality AuditCustomer QualityPlant QualitySupplier QualityQMSQuality AssuranceInprocess QualityQuality ...
10 Opening(s)
0 To 1.0 Year(s)
1.44 LPA TO 1.92 LPA
Job description
12/02/2024
HPS/2024/54
M/C Operator Aluminum foil Container
Male
10
0 to 1
10/12/ITI
Aluminium foil containers and trays are used to bake pies and to pack takeaway meals, ready snacks and long life pet foods.
Because of its brilliant impermeability to water vapour and water, aluminium foils help to store food for prolonged time periods.
M/C Operator Aluminum foil ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
6.00 LPA TO 12.00 LPA
POSITION CAD Designer
Key Responsibilities and Deliverables:
Design parts and mechanisms for electric Two wheeler, Three wheeler using CAD software
Design mountings for trims
Understand the changing requirements and address technical constraints
Presentation and justification of design concepts and ideas
Create 2D drawings and maintain documentation
Work on physical prototyping of designs and mechanisms
Work cross functionally with ...
3 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Handling Injection Moulding machine. JSW1000T, 850T, Milacron 910T, ZJPM 1200T, 160T, 430T Toyo180T
Daily morning meeting with teams to achieve production target
Daily production monitoring as per plan & Manpower planning operations
conducting productivity analysis and troubleshooting
Interact with related concern departments like Tool Room and Maintenance
Plastic processing tecniques injection molding, blow molding injection ...