1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
2.40 LPA TO 3.60 LPA
We are having an urgent opening for the position of Cutting In charge for a reputed company in Manufacturing (Safety Products) Industry at Kolkata Location.
Job Description:
The Company is looking for a Cutting In charge to oversee the cutting operations within the Footwear Production Department. The ideal candidate will have 1-2 years of experience in the footwear cutting ...
1 Opening(s)
5.0 Year(s) To 9.0 Year(s)
6.00 LPA TO 10.00 LPA
Job Description:
Prepare regular reports for upper management
Must be knowledge in Quantity, planning, budgeting, material management as per the project requirement’s (All types of material, Civil Construction, Electrical, Mechanical & Plumbing)
Researching and providing estimates for projects & maintain budgets and optimize expenses
Reviewing construction plans and preparing quantity requirements
Scrutinizing maintenance and material ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Job profile -Supporting role for Application Development.Assisted in new product development.To carry out the lab trials for new product development and analyses the feasibility of Its actualizationby using Two Roll Mill, Torque Rheometer, Single Screw Extruder, Hydraulic Press, MFI, Congo Red Tester,Volume Resistivity meter, Oven Heat Stability Test etc.Analyzing the ...
2 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.44 LPA TO 2.40 LPA
QC Executive
Wet analysis.
Sample collection as per requirement.
Preparation of standard solutions and standardization.
Instrumentation.
Documentation.
Required Candidate profile
Go getter in a team.
Good Communication
Good attitude.
RolePharmacist/Chemist/Bio Chemist
Industry TypePharma, Biotech, Clinical Research
Functional AreaMedical, Healthcare, R&D, Pharmaceuticals, Biotechnology
Employment TypeFull Time, Permanent
Role CategoryR&D
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
We have requirement for Manager / Sr. Manager (Quality Control) for our Paradeep location.
The details are given below:
Experience of handling customers e.g. NTPC / EIL / NPCIL (Nuclear Power Corporation) / BHEL / APGENCO / TANGEDCO / Other State Government Water Departments for in-process inspection and final performance test witness,
Formulation of ...
3 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.44 LPA TO 2.40 LPA
QC Officer
Wet analysis.
Sample collection as per requirement.
Preparation of standard solutions and standardization.
Instrumentation.
Documentation.
Required Candidate profile
Go getter in a team.
Good Communication
Good attitude.
RolePharmacist/Chemist/Bio Chemist
Industry TypePharma, Biotech, Clinical Research
Functional AreaMedical, Healthcare, R&D, Pharmaceuticals, Biotechnology
Employment TypeFull Time, Permanent
Role CategoryR&D
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.50 LPA TO 3.00 LPA
Must be Diploma/B.E in Rubber, cipet ,
Should have 02 to 05years of Rubber Industry excluding Tyre and Footwear
Should have Technical knowledge of Silicone
Should have knowledge of ISO:9001, HSE:14001 & OHSAS:
Should be certified ISO
Should have knowledge of Clean Room
Should have knowledge of Rubber Testing
Must have good command over English Language written ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
10.00 LPA TO 15.00 LPA
Must be B.E in Rubber
Should have 10 to 15 years of Rubber Industry excluding Tyre and Footwear
Should have Technical knowledge of Silicone
Should have knowledge of ISO:9001, HSE:14001 & OHSAS:
Should be certified ISO
Should have knowledge of Clean Room
Should have knowledge of Rubber Testing
Should have handled a team of 5 to 6
Must ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
0 To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description :
26/03/2024
HPS/2024/173
Qc executive
Male
1
0 to 2
DME/B.Tech
Qc executive for Plastic sheet line : We need a guy who should manage quality control of incoming raw material, packing material, online qc inspection on the production line, Qc of finished goods, Qc reports and documentation. Should know about all about ISO.
HPLC (Operation and ...