1 Opening(s)
12.0 Year(s) To 25.0 Year(s)
9.00 LPA TO 12.00 LPA
Qualification Required: B.E.( Mechanical / Production / Electrical)Minimum Experience Required: 12 to 25 Years Expected System Knowledge: Quality Assurance - Leadership Role Job Description (Along with Specific technical knowledge requirement): Must have experience of handling team of quality engineers/ Managers in the field of supplier quality, In- process/ Manufacturing / Field quality /Business ...
1 Opening(s)
6.0 Year(s) To 15.0 Year(s)
6.00 LPA TO 8.00 LPA
Department: MOULD PRODUCTION
Place: BAPL 3K, AURANGABAD
Designation: Production Incharge
Qualification: BE / DME
Job Skill required:
1 Knowledge of injection molding process.
2 Basic knowledge of plastic material
3 Basic knowledge of mold & machine.
4 Knowledge of post molding operations.
5 Knowledge of Vibration welding ( If Possible)
6 Manpower handling
7 SAP System
8 Knowledge of TS 16949 / ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Designation: Quality inspector (Male or Female)
Education : DME/ITI
Experience : 1-2 years
Job Skill required:
1 Well knowledge about assembly part defects & Child part inspection
2 QMS Documentation Knowledge -IPO, Control Plan, QA/QM Matrix, FPA, SIR, Dimensional inspection, RM report preparation
3 Check ...
1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 7.00 LPA
Designation: Senior Engineer (Male or Female)
Education: BE/DME
Experience : 7-8 years
Job Skill required:
1 Person should be aware & practice IATF 16949 / TPM, QMS System.
2 Well Knowledge about PPAP & DR Documentation.
3 Should be aware about PFMEA, FMEA, QA & QM Matrix, and Control Plan.
4 Best analytical ability
5 Very ...
4 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Post :
Production Engineer 02 (Press Shop)
Production Engineer 02 (Weld Shop)
JD :
Sound knowledge of Press Shop
Sound knowledge of Weld Shop
Production planning of Stamping & Welded Assembly’s as per customer scheduled (Daily/weekly/Monthly).
Manpower planning as per production plan in each shift.
Gives trainings to shop floor operators for improve multiskilling for production.
Plan & Conduct ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.50 LPA TO 5.00 LPA
Prepare Daily production Plan and maintain all production documents while in process parts
Maintain Hourly reports and reduce the cycle time
Implement the SMED(single minutes exchange of dies) project
Monitor and editing of press shop activity towards cost cutting and cycle time improvement
Minimize the generation of scrap as possible as.
Manage various shortages problems ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
QA-Sr. Engineer (3 requirements)
Working as a MR for QMS (TS 16949:2009).
Implementation of customer specific requirements& QMS in all functions of the plant.
Conducting Internal Audits & Implement all actions as per the improvement plan.
Analysis of Non conformance’s for Corrective/Preventive actions.
Daily & Monthly rejection analysis.
Customer complaint handling.
Analysis & Actions for In-house Rejection, Rework, Scrap, ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
Qualification- Diploma/ B.E in Electrical or Electronics.Experienced: 3 to 6 years in electrical maintenance of HPDC & Cast Iron Foundry plant is preferable.Work location: Chakan in PuneGender: Required only Male.
Job Description:Required - Candidates should have basic experience in Electrical Maintenance of HPDC plant, foundry equipment & Machines.Execution of PM activities, Shift handling experience, Knowledge ...
1 Opening(s)
5.0 Year(s) To 12.0 Year(s)
4.00 LPA TO 4.50 LPA
Qualification (Mandatory): DME with 8 Years/ BE with 5 Years
work location: Asian Paint (Shirwal)
Technical Skillset / JD: (Must have)1. Engineering Diploma with 7 to 8 years’ experience in operation & maintenance of utilities, EHS system at plant level, 2. Should be capable to address mechanical, electrical & instrumentation aspects independently ...