2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
7.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 3.60 LPA
A Senior Fitter in a steel company is responsible for the installation, repair, and precision alignment of heavy industrial machinery (such as rolling mills, conveyors, and hydraulic systems). They execute preventive and breakdown maintenance, lead junior technicians, and troubleshoot mechanical faults to minimize production downtime. [1, 2, 3]
Key Responsibilities
Installation & ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
5.00 LPA TO 10.00 LPA
CNC Milling Operations (Fanuc / Siemens / Haas controls) Aerospace-grade materials machining (Titanium, Inconel, Stainless Steel,Aluminum Alloys) G-code programming, offsets, and tool compensation Drawing reading, GD&T interpretation, and surface finish control Use of precision measurement tools (Micrometres, Vernier, Bore Gauges,Height Gauges, CMM) Process optimization and cycle time reduction Compliance ...
2 Opening(s)
2.0 Year(s) To 12.0 Year(s)
6.00 LPA TO 7.50 LPA
Job Responsibilities-
Operate heel milling machines for tower and pole components as per production drawings and specifications.
Set up machine parameters, tooling, and fixtures before operation.
Read and interpret fabrication drawings and work instructions.
Ensure accurate milling dimensions, whole alignment, and edge finishing.
Conduct routine machine inspections and basic preventive maintenance.
Monitor machine performance and report ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
Quality Inspector
Role Summary
The Quality Inspector will be responsible for conducting in-process inspections, final inspections, and Non-Destructive Testing (NDT) for aerospace components and assemblies for the H125 Final Assembly Line (FAL). Prior experience in an aerospace manufacturing or assembly environment is required. The role ensures full compliance to aerospace standards, ...
1 Opening(s)
2.0 Year(s) To 8.0 Year(s)
2.50 LPA TO 4.80 LPA
Key Responsibilities
Machine Setup & Operation: Safely prepare and operate VMC machines according to technical drawings and work instructions.
Tooling: Select, install, and adjust cutting tools, fixtures, and workpieces to match job specifications.
Programming & Offsets: Understand and modify G-code/M-code programs. Perform tool wear offsets and adjust speeds/feeds for optimal surface finish.
Quality Control: ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
1.00 LPA TO 3.60 LPA
*Job Summary* The CNC Operator is responsible for operating CNC machines safely and efficientlyto produce quality components as per drawing specifications and production targets. *Key Responsibilities* Operate CNC machines as per production plan.Load and unload raw materials and finished parts.Read and understand engineering drawings and process sheets.Perform basic machine setting and tool offset ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
2.40 LPA TO 3.00 LPA
JOB DESCRIPTION
27.05.26
134685
HPS/2026/454
Quality Inspector
Male
1
1 to 2
DME/B.E-Mech
8 Hrs
Job Opening: Quality Inspector
Number of Positions: 1
Location: Silvassa
Educational Qualification
Diploma in Engineering
Experience Required
Minimum 1–2 years of experience in Quality Control within a manufacturing/engineering environment.
Age Criteria
20 to 30 years
CTC / Salary
Depends on interview and candidate profile
Roles & Responsibilities
Inspection & Testing
Perform dimensional checks using Vernier Caliper, Micrometer, Gauges, ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
2.00 LPA TO 3.00 LPA
Position Title: – SQA (Supplier Quality Assurance)
Experience Required:
2 years of relevant experience in manufacturing industry
Experience in SQA activities preferred
Budget: 22000 to 25000 PM
Educational Qualification: Diploma in Mechanical Engineering preferred
Preferred Industry Background:
Machine manufacturing industry or Mechanical component manufacturing
Textile machinery industry
Motor assembly/manufacturing industry
Automobile manufacturing
Technical Knowledge Required:
· Basic knowledge of quality ...
3 Opening(s)
0 To 0.6 Year(s)
2.50 LPA TO 3.00 LPA
We have urgent opening for Graduate Trainee Engineer GET post for Production, Quality, Purchase departments at our Automotive parts manufacturing plant at Vasai east in Mumbai.
Qualification: BE / B.Tech / Diploma in Mechanical, Production, Automobile, Industrial Engineering or related disciplineExperience: Freshers can applyFunctional role / Department: Production (1 nos), Quality (1 nos), ...