Turbomachinery Integration & Testing based at Hebbal
1 Nos.
154715
Full Time
2.0 Year(s) To 5.0 Year(s)
30.00 LPA TO 35.00 LPA
Aviation/Aerospace - Manufacturing Firms
B.Tech/B.E. - Aerospace / Aircraft Maint; B.Tech/B.E. - Mechanical
Job Description:
Integration & Testing
You will be a hands-on engineer supporting assembly, integration and ground testing of turbopump systems. This area suits someone with a strong foundation in fluid systems and rotating machinery, plus a real interest in growing their turbomachinery expertise.
KEY RESPONSIBILITIES
• Planning, preparing and executing on-ground testing of turbopumps (including pumps and turbines) through cold-flow, spin tests and hot-fire support.
• Leading mechanical integration of turbopumps with feed systems, test stands and engine assemblies.
• Performing and verifying rotor balancing (static and dynamic) to defined requirements.
• Following and improving assembly procedures, torque specifications, cleanliness standards and inspection checklists.
• Analyzing test data (pressure, flow, temperature, vibration, speed) and supporting anomaly investigations.
• Working with design, manufacturing and quality teams to close out non-conformances and feed lessons back into design.
• Maintaining test documentation, assembly records and traceability.
• Presenting integration and test plans, readiness and test results at the PDR, TDR and VDR, closing out review actions and getting clearance at each stage.
KEY RESPONSIBILITIES
• 2–5 years of experience in turbomachinery or rotating equipment.
• Hands-on experience with ground testing, test stand operations and instrumentation.
• Working knowledge of rotor dynamics and balancing requirements.
• Familiarity with assembly standards: torque control, fits and tolerances, bearing and seal installation.
• Ability to read engineering drawings and apply GD&T.
• Experience with vibration analysis and data acquisition systems.
• Comfortable working on the shop floor and at test sites.
• Good to have for this area
• Exposure to cryogenic fluids or high-pressure propellant systems.
• Experience with bearings and seals for high-speed rotating machinery.
• Familiarity with MATLAB/Python for data analysis, or CAD (SolidWorks, NX, CATIA).
KEY RESPONSIBILITIES ACROSS ALL ROLES
• Correlate test data with design and analysis predictions, and update models to match.
• Find the root causes of performance gaps and test anomalies, and turn them into design or process improvements.
• Own and present your work at the Preliminary Design Review (PDR), Test Design Review (TDR) and Validation Design Review (VDR), close out review actions and get clearance at each stage.
• Take part in cold-flow and hot-fire test campaigns, including test setup, on-site data review and post-test inspection.
• Work closely with design, manufacturing, quality and test teams to close out non-conformances.
• Keep design records, test documentation and traceability up to date.
WORK ENVIRONMENT
• This role is part of the Turbomachinery Department. It combines office-based engineering work with regular travel to assembly and testing sites to support turbopump builds, integration, and cold-flow and hot-fire testing.
Desired Profile / Criteria / Skills :
REQUIRED QUALIFICATIONS ACROSS ALL ROLEs
• B.E./B.Tech or M.E./M.Tech (Bachelor's or Master's) in Mechanical Engineering, Aerospace Engineering or equivalent.
• 2–5 years in turbomachinery or high-speed rotating machinery, plus the area-specific requirements above.
• Fresh graduates with strong fundamentals and relevant projects are welcome. Candidates with 2–5 years of experience should demonstrate practical experience in their focus area: pump or turbine design, rotor analysis, vibration and stability, or turbomachinery testing and integration.
• Python or MATLAB for engineering calculations and data analysis.
• Strong documentation habits and attention to detail.
• Keen interest in learning turbomachinery design, performance and failure modes.
• Common Good to Have
• Liquid rocket engine turbopump experience, especially with cryogenic propellants.
• Knowledge of safety protocols for high-pressure and hazardous test environments.
• Experience in aerospace, rocket propulsion, gas turbines or industrial pumps.
Company Profile
--- is a pioneering ---tech startup founded by prominent Senior ISRO scientists
and IIT Bombay alumni with over 20 years of experience in designing, manufacturing,
testing and flying advanced Cryogenic Launch Vehicles. Driven by a vision to make India a
--- tech powerhouse, we are developing innovative launch vehicles that will transform
--- exploration. At ---, you’ll be part of a team creating history in the Indian ---
industry. Our goal is to become the first --- --- company from India to land on the
moon economically.
Apply Now
- Interested candidates are requested to apply for this job.
- Recruiters will evaluate your candidature and will get in touch with you.