Sr.Eng/AM-Receiving Quality Inspection (Derabassi)

Sr.Eng/AM-Receiving Quality Inspection (Derabassi)

1 Nos.
156701
Full Time
6.0 Year(s) To 11.0 Year(s)
9.00 LPA TO 11.00 LPA
Auto/Auto Ancillary
B.Tech/B.E. - Mechanical
Job Description:
  1. Incoming Material Inspection & Release
  • Lead incoming inspection and release of materials used in SMT/PCBA production.
  • Inspect electronic components, bare PCBs, solder paste, adhesives, labels, packaging materials and other production consumables as applicable.
  • Verify incoming material against approved drawings, specifications, BOM and purchase requirements.
  • Ensure receiving inspection is completed before material is released to production.
  • Define and maintain appropriate inspection plans and sampling levels based on material criticality and supplier performance.
  • Ensure rejected or suspected material is physically/systematically blocked to prevent unintended use.
  1. Electronic Component Quality Control
  • Verify electronic components for correct part number, manufacturer, MPN, package, value, rating, polarity and identification.
  • Inspect component packaging, reel condition, labeling and physical condition.
  • Verify supplier/manufacturer documentation such as CoC/CoA where required.
  • Check date code, lot/batch information and traceability requirements.
  • Ensure moisture-sensitive components are received in appropriate moisture-barrier packaging with required indicators/desiccant where applicable.
  • Identify abnormalities such as damaged leads, oxidation, broken packaging, contamination or incorrect labeling.
  1. Bare PCB Incoming Quality
  • Inspect incoming bare PCBs against applicable drawings and specifications.
  • Check PCB dimensions, thickness, surface condition, marking, warpage and visible damage as required by the inspection plan.
  • Verify critical characteristics and supplier inspection documentation where specified.
  • Ensure PCB lot/date-code traceability.
  • Coordinate additional technical evaluation when abnormalities are detected.
  • Prevent non-conforming PCBs from entering SMT production.
  1. Solder Paste & Consumable Control
  • Verify solder paste material type, alloy/specification, batch number and shelf life.
  • Check storage/transport conditions and packaging integrity upon receipt.
  • Ensure expired or damaged material is not released.
  • Verify incoming adhesives, fluxes, chemicals and other process consumables against approved specifications.
  • Coordinate with Stores to maintain appropriate FIFO/FEFO control for shelf-life-sensitive materials.
  1. Receiving Inspection Planning & Sampling
  • Develop and maintain incoming inspection standards and check sheets.
  • Establish appropriate inspection frequency and sampling based on material risk, supplier history and quality performance.
  • Define critical, major and minor defect classifications where applicable.
  • Implement tightened inspection for problematic suppliers/materials and reduce inspection only after demonstrated process stability and approval.
  • Ensure inspection results are documented and traceable.
  1. Supplier Quality Issue Management
  • Lead the initial response for supplier-related quality problems identified at receiving or during production.
  • Immediately contain suspected incoming material to protect SMT production.
  • Issue supplier quality notifications/rejection reports as per company procedure.
  • Coordinate replacement, sorting, rework or return of rejected material.
  • Obtain supplier root-cause analysis and corrective action.
  • Review supplier 8D / corrective-action responses for technical adequacy.
  • Verify effectiveness of supplier corrective actions and prevent recurrence.
  1. Rejection & Non-Conforming Material Management
  • Ensure rejected materials are clearly identified, segregated and blocked.
  • Maintain dedicated quarantine/hold control for non-conforming material.
  • Coordinate disposition through MRB, return-to-vendor, sorting, rework, deviation or scrap processes, as applicable.
  • Prevent unauthorized release of rejected/suspect material.
  • Maintain rejection and disposition records for complete traceability.
  • Monitor ageing of materials in the quality-hold area and drive timely closure.
  1. Production Line Protection
  • Ensure only approved and quality-released materials enter SMT production.
  • Immediately initiate containment when a supplier defect is discovered during production.
  • Trace affected supplier lot/batch across Stores, WIP and production lines.
  • Coordinate controlled sorting or screening where required.
  • Provide clear OK/Not-OK acceptance criteria to Production and Stores.
  • Support fast disposition to minimize production-line disruption without compromising quality.
  1. Supplier Performance Monitoring
  • Track incoming rejection trends by supplier, commodity and defect category.
  • Monitor supplier performance through metrics such as:
    • Incoming PPM
    • Lot acceptance/rejection rate
    • Repeat defects
    • Corrective-action closure
    • 8D response effectiveness
    • Supplier-caused production disruption
  • Prepare supplier defect Pareto and trend analysis.
  • Escalate recurring or high-risk supplier quality concerns.
  • Support supplier performance reviews and improvement programs.
  1. Root-Cause & Corrective Action
  • Perform preliminary root-cause analysis for incoming-quality failures.
  • Use structured problem-solving methods such as 5-Why, Fishbone, Pareto and 8D.
  • Work with suppliers to establish robust root causes rather than symptom-based corrections.
  • Verify implementation and effectiveness of corrective/preventive actions.
  • Maintain lessons learned from significant supplier defects.
  1. Counterfeit & Wrong-Material Prevention
  • Verify supplier, manufacturer, part-number and labeling consistency for electronic components.
  • Identify unusual marking, packaging or traceability discrepancies that require further verification.
  • Escalate suspected counterfeit, mixed or non-approved components according to internal quality procedures.
  • Ensure material is sourced/released only against approved specifications and approved sources.
  • Maintain appropriate traceability for critical electronic components.
  1. Measurement & Inspection Equipment
  • Ensure gauges and inspection equipment used for receiving inspection are appropriate and calibrated.
  • Use suitable measuring instruments such as vernier calipers, micrometers, height gauges and optical inspection equipment, depending on the characteristic being inspected.
  • Ensure inspectors follow approved measurement methods.
  • Support MSA/Gauge R&R activities for critical measurement systems where applicable.
  • Maintain inspection-equipment records and calibration status.
  1. NPI & New Component Qualification
  • Support incoming-quality readiness during New Product Introduction (NPI).
  • Review new component/material specifications and inspection requirements.
  • Develop receiving inspection plans for new materials.
  • Support qualification of new supplier materials/components where required.
  • Coordinate initial/sample inspection and approval before serial use.
  • Ensure quality controls are established before SOP.
  1. Supplier Change Management
  • Monitor supplier-related changes affecting product quality, such as manufacturing location, material, process or component changes.
  • Ensure changes are evaluated and approved before implementation where required.
  • Coordinate validation/inspection requirements for changed material.
  • Ensure updated specifications and quality documents are available before material release.
  1. Documentation & Traceability
  • Maintain complete records for:
    • Incoming inspection
    • Supplier/batch/lot traceability
    • Inspection results
    • Rejected material
    • Supplier complaints
    • 8D/corrective actions
    • Deviations/concessions
    • Material release/hold status
  • Ensure inspection instructions and specifications remain current.
  • Maintain records according to internal/customer retention requirements.
  1. Quality System & Audit Support
  • Support incoming-quality requirements within the plant quality management system.
  • Participate in internal, customer and supplier audits.
  • Ensure receiving-inspection processes are audit-ready.
  • Close audit findings within agreed timelines.
  • Support automotive quality-system activities including Control Plan, PFMEA, MSA and PPAP/APQP, where applicable to incoming/supplier quality.
  1. Cross-Functional Coordination
  • Work closely with Purchase, SCM, Stores, Production, Process Engineering, Plant Quality and Supplier Quality.
  • Communicate material-quality risks before they affect production.
  • Coordinate supplier containment and replacement plans with Purchasing/SCM.
  • Support Production and Process Engineering during component-related line issues.
  • Escalate high-risk supplier concerns to Quality/SMT Plant management.
  1. Training & Quality Awareness
  • Train receiving-quality inspectors on inspection requirements and defect criteria.
  • Develop defect samples, visual standards and inspection guidelines.
  • Improve awareness of ESD, MSD, component handling and traceability requirements.
  • Conduct periodic competency assessments for incoming inspectors.
  • Share supplier-quality lessons learned with Stores and Production teams.

Key Skills / Competencies

  • Electronic component & PCB inspection
  • Incoming/Receiving Quality Control
  • Supplier quality management
  • Electronic component traceability
  • ESD/MSD handling knowledge
  • Sampling and inspection planning
  • Non-conforming material & MRB management
  • Supplier 8D and corrective-action management
  • Root-cause analysis: 8D, 5-Why, Fishbone, Pareto
  • PPAP/APQP fundamentals
  • PFMEA, Control Plan and MSA
  • NPI incoming-quality readiness
  • Supplier performance monitoring and PPM analysis
  • Quality documentation and audit support
  • Good coordination with suppliers, purchasing and production
Key Skills :
Company Profile

A leading global automotive --- and electronics manufacturer specializing in the design, development, and production of advanced --- systems for passenger and commercial vehicles. The organization serves major automotive OEMs with innovative solutions, including headlamps, tail lamps, interior ---, electronic modules, and intelligent vehicle --- technologies.

With modern manufacturing facilities and engineering capabilities in ---, the company is committed to delivering world-class quality, technological innovation, and sustainable manufacturing practices. It emphasizes operational excellence, safety, continuous improvement, and employee development while offering rewarding career opportunities in production, quality, maintenance, engineering, logistics, and supply chain. The organization is recognized for its strong customer focus, global standards, and contribution to the evolving automotive industry.

Apply Now

  • Interested candidates are requested to apply for this job.
  • Recruiters will evaluate your candidature and will get in touch with you.

Similar Jobs