Officer - Packaging & Dispatch (SMT)

Officer - Packaging & Dispatch (SMT)

1 Nos.
156721
Full Time
3.0 Year(s) To 6.0 Year(s)
7.00 LPA TO 8.00 LPA
Packaging
Auto/Auto Ancillary
B.Tech/B.E. - Automobile; Diploma - Engineering
Job Description:

Finished Goods Receipt & Control

  • Receive finished PCBAs/products from Production/Quality after completion of required inspection and release.
  • Verify product part number, quantity, revision, batch/lot, production order and quality-release status before accepting material for packaging.
  • Ensure only quality-approved products are moved to finished-goods/dispatch areas.
  • Maintain clear identification and segregation of different products, lots and customer orders.
  • Ensure finished products remain fully traceable until final dispatch.
  • Prevent mixing of released, hold, rejected and rework material.
  1. PCBA Packaging
  • Ensure PCBAs/electronic products are packed according to approved customer and internal packaging specifications.
  • Use suitable ESD-safe bags, trays, boxes, partitions, protective covers and cushioning materials according to product requirements.
  • Prevent physical damage including bent components, PCB scratches, component breakage and connector damage.
  • Ensure adequate protection against ESD, moisture, dust, shock and vibration, as applicable.
  • Verify correct quantity per tray, box and master carton.
  • Ensure packaging materials are clean, damage-free and approved for use.
  1. ESD-Safe Handling & Packing
  • Ensure electronic assemblies are handled only through approved ESD-safe practices.
  • Use ESD-protective packaging for sensitive PCBAs/products as specified.
  • Ensure proper use of grounded workstations and ESD-safe handling equipment in packaging areas where required.
  • Prevent direct handling of sensitive PCB assemblies contrary to approved work instructions.
  • Coordinate with Quality for any ESD-related packaging deviation or concern.
  1. Labeling & Identification
  • Ensure correct product and customer labels are applied before dispatch.
  • Verify all critical label information such as:
    • Customer part number
    • Internal part number
    • Product description
    • Quantity
    • Batch/Lot number
    • Date code
    • Revision level
    • Serial number, where applicable
    • Barcode/QR code, where applicable
  • Verify label readability and correct placement.
  • Prevent wrong-label and mixed-label dispatches through systematic verification.
  1. Traceability Control
  • Maintain complete traceability from finished product receipt through packaging and customer dispatch.
  • Ensure batch, lot, serial-number and production information is linked with dispatched quantities where applicable.
  • Maintain packing-list and dispatch references for future traceability.
  • Support traceability exercises during quality investigations and customer complaints.
  • Ensure repacked products retain correct original identification and traceability.
  1. PDI & Final Dispatch Release
  • Coordinate with Quality for Pre-Dispatch Inspection (PDI) and final release.
  • Ensure dispatch is made only after completion of required quality checks.
  • Verify product quantity, packing condition, labels and documentation before loading.
  • Ensure any material under Quality Hold is physically and systematically prevented from dispatch.
  • Maintain final release/PDI records where applicable.
  1. Dispatch Planning
  • Prepare daily and weekly dispatch plans based on customer schedules and production availability.
  • Prioritize shipments according to customer requirements and committed delivery dates.
  • Coordinate finished-product availability with Production and Planning.
  • Ensure transportation arrangements are initiated sufficiently in advance.
  • Identify potential dispatch delays and escalate risks before the customer delivery is affected.
  • Monitor planned versus actual dispatch.
  1. Dispatch Documentation
  • Prepare and verify dispatch documentation as applicable, including:
    • Packing list
    • Delivery challan
    • Invoice-related dispatch information
    • Customer shipment documents
    • Transport documents
    • E-way bill support documents, where applicable
    • Special customer documentation
  • Ensure quantities and part numbers are consistent across physical shipment and documents.
  • Maintain dispatch-document records and retrieval system.
  1. ERP / System Transactions
  • Perform timely ERP transactions for finished-goods receipt, packing and dispatch.
  • Ensure physical stock and system inventory remain aligned.
  • Update dispatched quantities accurately against appropriate customer orders.
  • Prevent dispatch without authorized system/documentation transactions.
  • Support reconciliation of finished-goods inventory.
  • Coordinate corrections immediately when system/physical discrepancies are detected.
  1. Finished Goods Inventory Management
  • Maintain accurate finished-goods inventory.
  • Conduct cycle counts and periodic physical verification.
  • Monitor ageing finished goods and escalate abnormal stock.
  • Ensure proper FIFO/dispatch sequencing where applicable.
  • Maintain clearly defined FG locations and product identification.
  • Investigate and close inventory variances.
  1. Shipment & Logistics Coordination
  • Coordinate with Logistics/SCM and transporter for vehicle placement and shipment execution.
  • Confirm vehicle suitability according to shipment and product-protection requirements.
  • Ensure shipments are loaded according to the agreed dispatch schedule.
  • Communicate dispatch status to relevant stakeholders.
  • Follow up on critical or urgent shipments until successful handover to logistics.
  • Support resolution of transportation-related issues affecting customer delivery.
  1. Customer Delivery Coordination
  • Ensure customer dispatch schedules and committed quantities are understood and followed.
  • Coordinate internally when production delays or material shortages threaten delivery.
  • Provide shipment details to customer-facing/SCM teams as required.
  • Support investigation of shortages, wrong shipments or packaging complaints.
  • Implement corrective actions for dispatch-related customer issues.
  1. Loading & Shipment Verification
  • Conduct final verification before vehicle/container loading.
  • Confirm correct product, quantity, number of boxes/pallets and shipment documentation.
  • Ensure packages are safely arranged to prevent damage during transportation.
  • Ensure pallets/cartons are properly identified.
  • Maintain loading/dispatch confirmation records where required.
  • Prevent simultaneous loading activities from causing customer/product mix-ups.
  1. Packaging Material Management
  • Monitor stock of ESD bags, trays, cartons, partitions, labels, pallets and other packaging consumables.
  • Maintain minimum stock for critical packaging materials based on shipment requirements.
  • Coordinate replenishment with SCM/Purchase/Stores.
  • Control packaging-material wastage and unnecessary consumption.
  • Ensure only approved packaging specifications/materials are used.
  • Support packaging-cost optimization without compromising product protection.
  1. Packaging Standardization & Improvement
  • Maintain product/customer-specific packaging instructions.
  • Develop visual packaging standards and checklists.
  • Identify opportunities for improvement in packaging efficiency, handling and space utilization.
  • Reduce packaging-related product damage.
  • Support returnable-packaging concepts where applicable.
  • Participate in cost-reduction and packaging-optimization initiatives.
  1. Non-Conforming / Hold Material Control
  • Maintain proper segregation of OK, Hold, Rejected and Rework finished goods.
  • Prevent accidental dispatch of quality-hold or rejected material.
  • Coordinate with Quality for status updates and disposition.
  • Ensure released material is clearly identified before packing/dispatch.
  • Maintain physical and system status alignment.
  1. 5S, Safety & Housekeeping
  • Maintain 5S and visual management within packaging and finished-goods areas.
  • Maintain clear locations for packing, FG storage, staging and dispatch.
  • Ensure safe stacking of cartons, pallets and finished products.
  • Keep aisles, emergency exits and loading areas clear.
  • Ensure safe use of material-handling equipment.
  • Report unsafe conditions and packaging/storage risks.
  1. NPI & New Product Packaging
  • Support New Product Introduction (NPI) by defining packaging requirements for new products.
  • Coordinate packaging trials for prototype/pre-series production.
  • Ensure customer packaging requirements are understood before SOP.
  • Confirm suitable tray/carton/ESD packaging availability before ramp-up.
  • Capture packaging concerns during trial dispatches.
  • Support finalization of serial packaging standards.
  1. Audit & Documentation Compliance
  • Maintain packing and dispatch records in an audit-ready condition.
  • Support internal, customer and system audits.
  • Ensure work instructions, packaging specifications and visual standards are current.
  • Support traceability drills and finished-goods verification.
  • Implement corrective actions for packaging/dispatch audit observations.
  1. Cross-Functional Coordination
  • Work closely with Production, Quality, Planning, Stores, SCM, Logistics, Finance and Customer Coordination teams.
  • Participate in daily production/dispatch planning reviews.
  • Communicate risks related to finished-goods availability, packing material, transportation and customer schedules.
  • Escalate missed-dispatch risks with clear recovery actions.
  • Support customer delivery performance and overall plant logistics efficiency.

Key Skills / Competencies

  • SMT/PCBA packaging and handling
  • ESD-safe packaging and electronic-product handling
  • Finished-goods management
  • Product labeling and barcode control
  • Lot/batch/serial-number traceability
  • Dispatch planning and shipment coordination
  • ERP-based FG and dispatch transactions
  • PDI/final-release coordination
  • Customer-specific packaging requirements
  • Dispatch documentation
  • Inventory accuracy and cycle counting
  • Packaging material control
  • Logistics/transporter coordination
  • 5S and visual management
  • Good Excel/reporting and coordination skills

Key Performance Indicators

KPI Area

Measurement

Delivery

On-time dispatch / schedule adherence

Customer Delivery

Delivery-performance compliance

Packaging Quality

Packaging-related complaints/damage

Dispatch Accuracy

Wrong part / quantity / label incidents

Traceability

Batch/lot/serial traceability compliance

Inventory

Finished-goods inventory accuracy

Documentation

Dispatch-document accuracy

PDI

Final-release compliance

Cost

Packaging material consumption/wastage

Safety

Safe handling/loading compliance

5S

Packaging & dispatch-area audit score

Customer

Dispatch/logistics complaint reduction

Company Profile

A leading global automotive --- and electronics manufacturer specializing in the design, development, and production of advanced --- systems for passenger and commercial vehicles. The organization serves major automotive OEMs with innovative solutions, including headlamps, tail lamps, interior ---, electronic modules, and intelligent vehicle --- technologies.

With modern manufacturing facilities and engineering capabilities in ---, the company is committed to delivering world-class quality, technological innovation, and sustainable manufacturing practices. It emphasizes operational excellence, safety, continuous improvement, and employee development while offering rewarding career opportunities in production, quality, maintenance, engineering, logistics, and supply chain. The organization is recognized for its strong customer focus, global standards, and contribution to the evolving automotive industry.

Apply Now

  • Interested candidates are requested to apply for this job.
  • Recruiters will evaluate your candidature and will get in touch with you.

Similar Jobs