TAPPER / ASSISTANT TAPPER -FERRO ALLOYS

Job Description:

Need to have good knowledge & working experience of tooling.

Need to have good experience in drilling & tapping.

Responsible for assembly of Dynamometers.

Need to have good knowledge & working experience of tooling.

Need to have good experience in drilling & tapping.

Responsible for assembly of Dynamometers.

Responsible for assembly of Dynamometers.

• 1) Taps refining furnaces or reduction pots by one of following methods to pour molten slag or nonferrous metal, such as copper or aluminum, into molds, crucibles, or ladles: Punches clay plug from taphole, using steel rod, to allow molten metal to flow into molds.

• 2) Molds clay plugs and inserts them into taphole to stop flow of metal, using rod, or builds clay-retaining wall over taphole.

•         3) Chips or burns away solidified slag and metal from taphole, using chisel-edged bar, oxygen lance, or by short-circuiting current from bus bar to taphole with steel rod.
• • 4) Signals OVERHEAD CRANE OPERATOR to place pouring crucible near pot.
  
  
  • 5) Breaks hole in crust of electrolytic bath, using crowbar.
  • • 6) Clamps siphon lid on crucible, and inserts other end of siphon into hole.
    
    
    • 7) Attaches airhose to siphon, and turns valve to siphon molten metal into crucible.
    • 8) Lowers anode into bath, using pulley to maintain its position beneath bath surface