Executive / Sr. Executive – Maintenance
1 Nos.
4512
Full Time
4.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.00 LPA
Production / Quality / Maintenance
Industrial Products/Equipment/Machinery/Projects & Engg
Job Description:
DESIGNATION – Asst. Manager / Sr. Executive- MAINT.
- Handling Machine Breakdown during the Shift.
- Maintaining documents for ISO audits, calibration of equipment’s, reduce breakdown of Machine, maintaining machine History card.
- Handling utility maintenance such as Generator 250kva, ELGI compressor 30kw, chiller, cooling tower, APFC panel etc… also handling new projects of the machine installation for the shop floor.
- Work with limited supervision and maintain an atmosphere of cooperation among and between shifts, mold repair shop, quality control, and management to facilitate departmental goals.
- Ability to make sound judgments, Decision Making Skills, Multi-Task, Perform Under Pressure & meet the goals.
- Responsible for Energy Consumption activities Implementation in plant.
- Electrical & Mechanical (breakdown, preventives) maintenance injection molding & Blow Moulding.
- Responsible for electrical (Breakdown, preventive & Predicative) maintenance of conventional Medium & a heavy machine like Ultrasonic welding, Vibration welding, DC power supply unit, Metalizing & Oven etc.
- Verify correct set-up of molding, presses and auxiliary equipment before the machine starts up.
- Obtain mold approval at the appropriate time.
- Assist with the set-up and maintenance of auxiliary equipment, including granulators, conveyors, mold temperature controls, and mold electrical controls.
- Make minor repairs to machines and equipment and notify proper personnel of necessary major repairs.
- Assist Mold Attendants as time permits and help relieve other Molding Technicians for breaks and fills in during personnel shortages.
- Responsible and accountable for achieving adequate production levels, maintaining the expected product quality, and keeping the area clean and in order.
- Familiar with all the department's inspection procedures and standards.
- Responsible for the regular and periodic monitoring of product for acceptable quality to the most recent specification.
- Maintain records and prepare legible reports, including SPC reports, QC inspection reports, housekeeping checklists, mold cavity data sheets, production downtime reports, cycle time sheets and problem/corrective action logs, etc. accordance with departmental standards and Quality System Standards.
- Maintain records and prepare the reports of APQP,PPAP,MSA,MTBF,MTTR,MP sheets.
- Observe all safety and environmental procedures and Good Manufacturing Practices.
- Implementation of 5S, TPM, Quality Tools etc… Reduced Shop floor Accident & Machine Downtime
Documentation -
- Daily ISO-TS 16949 & OSHAS, MSES documentation for update & implementation.
- Daily process measurable.
- Every day check & verified ERP entry.
- Prepare & attend 8D & CAPA regards process loss & safety.
- Keep all the record verification ISO- TS 16949 AUDIT, ISO 14001 & 18001.MSES requirement (For EXTERNAL & INTERNAL AUDIT) purpose.
- Actively participated in auditing of ISO-TS 16949, ISO 14001, and iso18001 & 5S.
- Undertaking regular Internal Audits, Root Cause Analysis, troubleshooting and reviews to ensure adherence to highest standards.
- Check all document update display proper way & proper place.
Project Management-
- Provide to support for new developments.
- Cost Analysis/benefits on the new projects.
- Recommending new projects, activities, automation to improve productivity, cost reduction Drive.
- Related to project discuss with CFT team.
Job Interface / Relationships - Internal / External –
- Production manager / PPC Team for intimating the Schedules & below MIL items, if any
- Purchase manager for Logistics requirements/ release of PO, if any
- Quality Managers or supervisor for necessary signatures.
- Logistic Supervisors for any quality complaint due to packing or transport.
- Supplier representative, in case of defect supplies.
- Customer representative, in case of complaints.
- Customers – Internal / External
- BD Team – For parts Rate or new development.
Company Profile
Compay is ISO 9001-2008 Certified Organization is a High quality mould making facility, fully integrated with Design, Development & Manufacturing of Injection & Blow Moulds and Manufacturing of Moulded Components for Automotive, Appliances & other Industries. --- have a strong footprints in Automotive Industries, catering business to most of Indian & Overseas OEM’S & Tier 1 Suppliers. What makes --- really special is our in-depth knowledge & Vast Experience in Tooling & Moulding Industry, and our willingness to truly partner in our customers’ progress with CUSTOMER’S TOTAL SATISFACTION
Apply Now
- Interested candidates are requested to apply for this job.
- Recruiters will evaluate your candidature and will get in touch with you.