1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.00 LPA
Hiring for Maintenance Engineer in Aurangabad.
Designation: Maintenance Engineer
Education: DME / B. Tech Electrical/ Diploma Electrical
Must Required experience - Cnc Machine Shop
Experience: Min 03 Years
Responsibility
Total machine shop maintenance, breakdown attend, & preventive maintenance
Work done on CNC Machines like LATHE, VMC, Machine(Makino, AMS, Jyoti), Etc.
Route Cause Analysis Report making.
Preventive Maintenance check sheet up-gradation.
Electrical Maintenance Documentation ...
1 Opening(s)
10.0 Year(s) To 20.0 Year(s)
5.00 LPA TO 6.00 LPA
Hiring for Machine Shop Gears & Hub Manufacturing Industry
Position:- Production Manager 01 (M)
Qualification:– DME.BE-Mech,
Experience:- Min 10 years in Gears & Machine Shop Industries
Salary: Rs. 45,000/- to 55,000/-
Job Profile:
Daily production planning and achieve target daily basis as per the scheduled plan.
Manpower handling improves knowledge as per the skill matrix.
Coordinate with the logistic team ...
2 Opening(s)
4.0 Year(s) To 6.0 Year(s)
3.36 LPA TO 3.85 LPA
Interview Date : 30/06/2018 & 02/07/2018
Post :
Senior Electrical Maintenance Engineer - 02
Salary : upto 3.85 Lac(s)
Education : Diploma Electrical / BE Electrical
Job Profile :
1) Hand on CNC, VMC, HMC machine, Convention machines – SPM. Troubleshooting.
Works on Fanuc , Siemens, PLc Drive, Mitsubishi,
2) Updating document such as PM Check sheet, M/C History card,
3) ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.00 LPA
Post: Senior Maintenance Engineer
Education: DME / BE Mechanical
Experience: Min 3 Years
Salary up to 3.80 LPA
Skill required: Kaizen, TPM, and Autonomous
Plant Maintenance
Hand on CNC, VMC, HMC machine, Convention machines – SPM. Troubleshooting.
Works on Fanuc, Siemens, PLc Drive, Mitsubishi,
Updating document such as PM Check sheet, M/C History card,
PLC Programming. (Messing, Mitsubishi)
Maintenance Documents, PM,BD, ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Maintenance Engineer Mechanical - 01
Education : ITI / Diploma Mechanical / BE Mechanical
Experience : Min 2 Years
Salary : upto 3.00 LPA
Job Responsibility:
Preventive maintenance and Breakdown Maintenance of All Machine
To make Monthly,Yearly Preventive maintenance Plan all Machine as per the schedule.
To make maintenance of Power Press, Milling Machine, Cutting Machine
To make overall maintenance of CNC , VMC Machine
To do the Maintenance of Hass, AMS Make Machine
To Replace LM Guide, Spindle, Ball Screw, Regulating Wheel.
To do the maintenance CNC turning, Gedee Weiler
To Replace the Cylinder Seal, Hyd. Pump Seal, Pneumatic Cylinder
To do the maintenance of SPM machine like Wet end, End touch, Induction m/c.
Doing necessary arrangements for the machine parts as per required situations
Followed 1S, 2S and TPM Process during working
Maintenance for Utility section - Compressors, Electric reading, on Monthly basis
To make Breakdown Reports, PM Reports, Check sheet of Machine.
To maintain the records as per (ISO) MTBF, MTTR
Installation of new machine
Job Location : Waluj MIDC , Aurangabad
for More details call on 9765567699
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.60 LPA
Post : VMC Programmer
Technical Education: Diploma in mechanical / BE Mechanical engineering
JOB PROFILE
VMC (AMS-fanuc control oi31 mate-micromatic tool) operating and setting.
Part (DIE) setting and manual programming (2D).
Verified machines setting and programme control data for accuracy.
Post a 3D programme through DNC software to machine.
Set controls and regulated speed, feed, coolant flow and angle ...
3 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.60 LPA
Interview Date : 06/06/2018 to 8/05/2018
Post :
1.Maintenance Engineer Electrical - 02
Salary : upto 3.60 Lac(s)
Education : Diploma Electrical / BE Electrical
Job Profile :
1. Maintenance Electrical Engineer
1) Hand on CNC, VMC, HMC machine, Convention machines – SPM. Troubleshooting.
Works on Fanuc , Siemens, PLc Drive, Mitsubishi,
2) Updating document such as PM Check ...
15 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.50 LPA
Hiring for VTL Operator in manufacturing Group
Company Profile : Company was founded in 1983 and is India's largest and most reputed manufacturer of Electrical Steel Laminations, Motor Cores, Sub-Assemblies, Die-Cast Rotors and Press Tools. We have already diversified into manufacturing of Castings, Steel Fabricated Parts and machined components stator and rotor ...
4 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 2.40 LPA
5th Axis & 4th Axis CNC Machines, VTL,VMC & HMC (AMS, MAZAK 6800 & 4000, MAKINO a88 & a81, BFW maxpro H630) controll of Fanuc professional 5 & Mazatrol.
Knowledge of various tools & tool setting in shrinkfit machine & checking in tool precetor (zoller).
Introduce of new tools for reducing cycle ...
7 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 2.30 LPA
Post :
1.Maintenance Engineer Electrical - 04
2. Maintenance Engineer Mechanical - 03
Education : ITI / Diploma Mechanical / Electrical
Job Responsibility:
Preventive maintenance and Breakdown Maintenance of All Machine
To make Monthly,Yearly Preventive maintenance Plan all Machine as per the schedule.
To make maintenance of Power Press, Milling Machine, Cutting Machine
To make overall maintenance of VMC Machine
To do the Maintenance of Hass, AMS Make Machine
To Replace LM Guide, Spindle, Ball Screw, Regulating Wheel.
To do the maintenance CNC turning, Gedee Weiler
To Replace the Cylinder Seal, Hyd. Pump Seal, Pneumatic Cylinder
To do the maintenance of SPM machine like Wet end, End touch, Induction m/c.
Doing necessary arrangements for the machine parts as per required situations
Followed 1S, 2S and TPM Process during working
Maintenance for Utility section - Compressors, Electric reading, on Monthly basis
To make Breakdown Reports, PM Reports, Check sheet of Machine.
To maintain the records as per (ISO) MTBF, MTTR
Installation of new machine
Job Location : Nandigaon Village, Kothur Mandal Mahboobnagar - Hyderabad
For More details call on 9765567699