1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.50 LPA TO 4.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 2.60 LPA
CMM operating on Accurate Machine.
In process Inspection & final Inspection as per QP.
To prepare setup approval report if any new changes done in production Process & keep record.
Monitoring and examining at each stage of production. Recommending
Ensuring that all the testing are performed at highest standards.
Inspect the components & prepare PDI ...
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
8.00 LPA TO 10.00 LPA
Position: Purchase Head / Manager
A dynamic professional experience with Internal Auditor for ISO/TS, TPM 5S, Six Sigma, Kaizen etc organisation in Procurement, Global and Local Sourcing, New Vendor Development, Purchase of Direct and circumlocutory material. Expertise in Material planning, Commercial Negotiation, Material Sourcing, Alternate cost effective Purchasing .Techno commercial approach towards ...
1 Opening(s)
2.0 Year(s) To 7.0 Year(s)
2.40 LPA TO 3.60 LPA
Roll :
Designing various electrical control panels like PLC, VFD, Soft Starter, MCC, PCC, Pneumatic, ETC Circuit designing, preparing SLD, Panel layout & Electrical schematics.
Making BOM, selection of material as per requirement or IP protection, preparing drawings for approval communicating with clients for understanding and detailing of drawings
Supporting to other teams ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
8.00 LPA TO 10.00 LPA
Position: Purchase Head / Manager
A dynamic professional experience with Internal Auditor for ISO/TS, TPM 5S, Six Sigma, Kaizen etc organisation in Procurement, Global and Local Sourcing, New Vendor Development, Purchase of Direct and circumlocutory material. Expertise in Material planning, Commercial Negotiation, Material Sourcing, Alternate cost effective Purchasing .Techno commercial approach towards ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 3.00 LPA
Roll :
Designing various electrical control panels like PLC, VFD, Soft Starter, MCC, PCC, Pneumatic, ETC Circuit designing, preparing SLD, Panel layout & Electrical schematics.
Making BOM, selection of material as per requirement or IP protection, preparing drawings for approval communicating with clients for understanding and detailing of drawings
Supporting to other teams ...
1 Opening(s)
6.0 Year(s) To 15.0 Year(s)
3.00 LPA TO 4.50 LPA
Qualification: Bsc chemistry, Diploma / BE in Plastic, Mechanical or Production with min 6 yrs experience in Rubber or Plastic injection molding parts manufacturing company
1 Quality Assaurance & Quality ControlJob Set-up Approval,Lead team of Inprocess InspectorsLead the Team of Final InspectorsHandle Internal ComplaintsHandle Customer ComplaintsContinuous Improvement
2 APQP & Development QualityAPQP ...
1 Opening(s)
2.5 Year(s) To 4.0 Year(s)
4.00 LPA TO 5.00 LPA
We required Senior Engineer in New Product Development Department.
Company Profile : Satin Finish Electroplating, Satin Finish Handle Bar, Sari Guard & Leg Guard, Trailing Arm Assembly, Auto Components, Manufacturer, Aurangabad, India The total sales revenue of the company for the financial year ending on March 2015 is INR 1100 million (Euro ...