1 Opening(s)
0 To 2.0 Year(s)
1.00 LPA TO 2.00 LPA
Job Description & Responsibility - - Basic knowledge of automotive Standards & Regulations- Basic knowledge in Vehicle certification
Understand of the design and Development process- Vehicle Starting and Charging system components knowledge (Starter Motor,
Alternator, Battery, etc)- Design calculations like Charg e balance, Battery and Alternator rating selection - Capturing Specification r
equirements ...
1 Opening(s)
0 To 2.0 Year(s)
1.00 LPA TO 4.00 LPA
ob Description & Responsibility - - Basic knowledge of automotive Standards & Regulations- Basic knowledge in Vehicle certification- Understand
of the design and Development process- Vehicle Starting and Charging system components knowledge (Starter Motor, Alternator, Battery, etc)-
Design calculations like Charg e balance, Battery and Alternator rating selection - Capturing Specification requirements ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.00 LPA
Hiring for Maintenance Engineer in Aurangabad.
Designation: Maintenance Engineer
Education: DME / B. Tech Electrical/ Diploma Electrical
Must Required experience - Cnc Machine Shop
Experience: Min 03 Years
Responsibility
Total machine shop maintenance, breakdown attend, & preventive maintenance
Work done on CNC Machines like LATHE, VMC, Machine(Makino, AMS, Jyoti), Etc.
Route Cause Analysis Report making.
Preventive Maintenance check sheet up-gradation.
Electrical Maintenance Documentation ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
7.00 LPA TO 8.00 LPA
Designation- Senior Solar Design EngineerLocation- Saltlake/ KolkataReports to: CTO & GM-SolarProject Qualification – B.E/ B.Tech (Electrical)
Job Description:
• Should have knowledge of DC & AC engineering specifications of Solar PV Plants and standards including IEC, IEEE, SEC, IS etc. NEC & ANSI (Preferred, but not compulsory)• Very good experience with ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
4.00 LPA TO 5.00 LPA
Position: Sr. Executive Maintenance
Location: Umbergaon - Vapi
Experience: 5 - 7 Years
Industries: Medical Devices & Equipment
Responsibilities:
Planning and carrying out scheduled maintenance.
Responding to emergencies
Repairing equipment and testing repairs
Carry out routine maintenance work and respond to equipment faults
Diagnose breakdown problems
Arrange specialist procurement of ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
Position: Maintenance Officer
Location: Sarigam
Experience: 3-5 years
Industries: Pharma
Responsibilities:
Should ensure that industrial machinery and equipment runs smoothly and reliably.
Planning and undertaking scheduled maintenance.
Responding to breakdowns.Should have experience in manufacturing industry.
To handle all maintenance of plant, machinery and equipment. Ready to ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 2.40 LPA
Position: Maintenance Engineer
Location: Vapi
Experience: 2 - 3 Years
Industries: Packaging
Responsibilities:
Perform regular maintenance on packaging machinery and equipment
Troubleshoot and repair mechanical, electrical, and pneumatic systems
Ensure equipment reliability and optimal performance
Coordinate preventive maintenance schedules
Conduct inspections to identify potential issues
Support production teams to minimize ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
Control the breakdown maintenance and maximum utilization men and m/c.
To make annual preventive and predictive maintenance schedule of machines and revised as per requirement.
Implementation of conditioned based maintenance.
Poke –Yoke and continuous in
Team leader of kaizen implementation in the Plant.
Daily morning meeting with production department.
Major break down analysis report monthly basis.
Allocation ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
10.00 LPA TO 12.00 LPA
Prepare Calibration Schedule yearly with monthly as per plant wise
2) Master Instruments Calibration Maintain by Authorized party
3) Attend the break down as like Sox, NOx, Cox, PM2 sensor working
4) Check the PLC/ SCADA System to Field Instruments with feedback signal.
5) Energy Saving by Process control with new concept
6) Maintain the ...
2 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.80 LPA TO 3.00 LPA
Hiring for Maintenance Engineer in Aurangabad.
Designation: Maintenance Engineer
Education: DME / B. Tech Electrical/ Diploma Electrical
Must Required experience - Cnc Machine Shop
Experience: Min 03 Years
Responsibility
Total machine shop maintenance, breakdown attend, & preventive maintenance
Work done on CNC Machines like LATHE, Grinding, Milling, Turning Machines (Makino, AMS, Jyoti), Etc.
Route Cause Analysis Report making.
Preventive Maintenance check sheet up-gradation.
Electrical ...