2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 5.00 LPA
Milling Operator Set up of CNC milling machines and manufacturing of single or mass parts according drawingunder consideration of the tolerances and part requirements. Ensure order and cleanliness in assigned area of responsibility. Experience in 5-axis Milling machines and on INTEGREX CNC Turning machine is an addedadvantage. Independently work off ...
1 Opening(s)
3.0 Year(s) To 8.0 Year(s)
4.00 LPA TO 5.50 LPA
Designation :- Engineer/Sr Engineer CAM Programmer
Location - Pashamylaram, Hyderabad
For Mold Shop
Job Responsibilities :-
Generate CNC programs by using of computer aided systems (CAM). Testing of the generate CNC programs and training of CNC Operators
Experience in 5-axis NX CAM(UG) experience of minimum 5 years in Milling section and Programming knowledge on INTEGREX ...
2 Opening(s)
4.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 5.00 LPA
Looking for Only Diploma holder candidates for this profile.
BTech / ITI will not be considered.
Only Male preferred
First Telephonic Round of screening will be done, once CV received.
Set up of CNC machines
Independently work off of defined work processes (machine set up sheet)
Simply modification of CNC programs
Monitoring of the cutting tools
Correction of ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
17.05.24
HPS/2024/301
CNC Operator
Male
1
1 to 2
ITI Fitter
The candidate should be ITI / Diploma (Mechanical) with minimum 2 years of experience in operation / programming of CNC Machines (CNC Vertical Turning Lathe, HMC, VMC & Turning Centre) on FANUC & SINUMERIK Control.
Knowledge of operating / programming of CNC machines on Fanuc control (Turning Centre & ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
For over five decades, the company has consistently met the stringent requirements of major OEMs both domestically and internationally. Their relentless commitment to excellence and the timely adoption of cutting-edge technologies have earned them the reputation of being a preferred vendor in the industry. Renowned for their competitiveness in Cost, ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 6.00 LPA
Roles and Responsibilities:
Operating the twin screw extruder and manufacturing high-quality filaments (filaments for 3d printing) as per stated requirements.
To efficiently manufacture the provided quantity of filaments while adhering to the highest quality standards.
Be involved in the production planning process and provide insights to optimize the plan. Also, ensure sufficient materials ...
1 Opening(s)
0 To 3.0 Year(s)
2.16 LPA TO 2.40 LPA
Job description
14.05.24
HPS/2024/294
M/C Operator
Male
1
0 to 3
12th/ITI Fitter
Operates controls to regulate temperature, pressure, speed and flow of operation.
Measures and loads materials, items and ingredients for mixing into machines and feeding mechanisms.
Monitors operation, regulates material supply and adds chemicals and colorants to mixture.
M/C Operator
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job description
13.05.24
HPS/2024/288
Painting Operator 5 colour Printing machin Operator Heidleberg
Male
1
1to 2
12th / ITI Fitter
Painting and coating machine operators set up and run machines that coat or paint products. Painting and coating machine operators control, clean, and maintain their machines. These machines apply coatings and paints to a wide variety of products
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job description
11/5/24
HPS/2024/284
Coating Operator
Male
1
1to 2
ITI Fitter
Minimum 1 to 2 Years Experience
Must have experience in operating Coating machines
Experience in machine setting and operation.
Records and maintains the production batch record during the coating operation.
Observes machine gauges and equipment calibration status and reports any deviations to Superiors.
Operates auxiliary equipment used in coating pans and ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 4.20 LPA
JOB DESCRIPTION
11/5/24
HPS/2024/283
T-Type Blown Film - Talpatri
Male
1
3 to 5
DME/ITI
set up and operate production equipment including blown film extruders, silicone. Machines that extrude and coat flat films from synthetic materials.
A blown film making machine is a type of manufacturing equipment that is specifically designed to produce these plastic films. The process of making ...