100 Opening(s)
1.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Category:
Intensive Care
Operation Theatre
Paediatric Neonatology
Required Qualification:
Diploma in General Nursing OR B.Sc. Nursing
Post-Basic Diploma in the concerned specialty
Registration with the concerned Nursing Council
Required Experience:
OT & ICU (Specialist Nurses) At least 1 - 3 years of post-registration experience in the OT& ICUs. Super-specialties
At least 1 - 3 years of post-registration experience in the concerned ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Quality Lab Chemist
Education: Bsc / Msc Chemistry
Experience: Min 5 Years in Steel Industry / Rolling Mill
Job Assignment in Lab :
• Checking the specification percentage in the coolant, measuring the oil concentration, Checking the Cl, Fe Percentage in mill Process, Inspection the Final Rolling On Mill Process.
•Checking the CGL Line Zink Bath Testing
•Daily Reporting Process Control, Reporting The SOP Process
•Working In 5 ‘S’ Process
Job Assignment in CGL line:
•Checking the steel sheet, Checking Hardness HRB & VPN, Bend testing, LFQ (long farming testing), measuring the thickness & width, Defects on Sheet, Checking the Zinc Coating, Checking The I Value.
•Clearing the Quality CGL Line in SAP
•Reporting the SOP Process
Job Assignment In CRM Line:-
•Checking the steel sheet, Checking Defects on Sheet, Measuring the thickness & width.
•Clearing the Quality CRM Line in SAP.
•Reporting the SOP Process.
Water Test: PH, Alkalinity Hardness, Conductivity, Chloride, HCN, Total NH3, Phenol, C.O.D., B.O.D.,D.O, Oil & Grease, Mlss, Mlvss, TDS, SS, Sulphaide, Phosphate.
By Product: Tar Moisture, Tar Dust & Tar Fog, TI, and BI.
Gas Analysis orsat apparatus CO2, CmHn, O2, CO, CH4, and H2.
Estimation of NH3, H2S, Naphtha.
Coke & Coal Ash: Estimation of Coke & coal ash:
SiO2, Al2O3, CaO, MgO.
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
for more details call on 7249840333 / 9765567506
1 Opening(s)
7.0 Year(s) To 12.0 Year(s)
5.00 LPA TO 7.00 LPA
Handling of continues carburizing Furnaces(Made By Dongwo surface Tech Ind).
Handle all Heat Treatment Shop Floor Including Shot Blasting Machine, Shot Peening Machine, Thread Softening Machine, MPI Machine, Straightening Machine.
Checking of samples (Case Depth, core hardness, Micro Structure)
Checking of inward samples (surface hardness, microstructure, grain structure)
Handle Endo Gas Generator
Handling of wet Lab(Cutting, Mounting, Polishing.)
Operating of Brinell Hardness Tester, Rockwell Hardness Tester, Vickers Hardness Tester, Microscope Millipore Checking, Spectro Test.
Fill up all JH Sheets, DWM data OEE Sheets. Utility Consumption aw Material Inspection for crack, Hardness, Micro-structure, Grain size Measurement, Decarburization level and Inclusion level measurement and defects if any with traceable documents.
Inspection of heat treated parts for surface hardness, Effective case depth, microstructure analysis, decarburization level (if any) and defects if any with traceable documents.
Research & Development work like the selection of an appropriate heat treatment cycle without sacrificing customer requirements.
Monitoring the heat treatment process continuously and taking the remedial action if any deviations are found.
Heat treatment vendor development, Vendor process monitoring, and product inspection.
Maintaining the Metallurgical equipment that is as follows
Metallurgical Microscope ( Leica ) – DM 2800
Micro Vickers Hardness Tester ( Future tech) – FM 300
Vickers hardness tester ( Future tech) – FV 800
Digital Rockwell Hardness Tester ( Future tech) – FR – 3e
Analog Rockwell Hardness Tester.
Abrasive cutting machine ( Chennai metco )
Molding machine ( Chennai Metco )
Double Disc Polishing Machine ( Chennai Metco )
Belt grinding machine ( Chennai Metco)
Brinell Hardness Tester
Muffle Furnace (Techno).
Carrying out of furnace and process validation with proper traceable documents and calibrating the metallurgical instruments with appropriate service parties as per schedule.
Job Location: Waluj MIDC, Aurangabad
Send CV on Career@paradiseplacement.co.in
for more details call on 9765567506 / 7249840333
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.80 LPA
Post: Heat Treatment Engineer / Assistant Manager
Experience : 3 to 6 Years
Salary: 4 LPA
JOB RESPONSIBILITIES:-
Handling of continues carburizing Furnaces(Made By Dongwo surface Tech Ind).
Handle all Heat Treatment Shop Floor Including Shot Blasting Machine, Shot Peening Machine, Thread Softening Machine, MPI Machine, Straightening Machine.
Checking of samples (Case Depth, core hardness, Micro Structure)
Checking of inward samples (surface hardness, microstructure, grain structure)
Handle Endo Gas Generator
Handling of wet Lab(Cutting, Mounting, Polishing.)
Opearting of Brinell Hardness Tester, Rockwell Hardness Tester, Vickers Hardness Tester, Microscope Millipore Checking, Spectro Test.
Fill up all JH Sheets, DWM data OEE Sheets. Utility Consumption aw Material Inspection for crack, Hardness, Micro-structure, Grain size Measurement, Decarburization level and Inclusion level measurement and defects if any with traceable documents.
Inspection of heat treated parts for surface hardness, Effective case depth, microstructure analysis, decarburization level (if any) and defects if any with traceable documents.
Research & Development work like the selection of an appropriate heat treatment cycle without sacrificing customer requirements.
Monitoring the heat treatment process continuously and taking the remedial action if any deviations are found.
Heat treatment vendor development, Vendor process monitoring, and product inspection.
Maintaining the Metallurgical equipment that is as follows
Metallurgical Microscope ( Leica ) – DM 2800
Micro Vickers Hardness Tester ( Future tech) – FM 300
Vickers hardness tester ( Future tech) – FV 800
Digital Rockwell Hardness Tester ( Future tech) – FR – 3e
Analog Rockwell Hardness Tester.
Abrasive cutting machine ( Chennai metco )
Molding machine ( Chennai Metco )
Double Disc Polishing Machine ( Chennai Metco )
Belt grinding machine ( Chennai Metco)
Brinell Hardness Tester
Muffle Furnace (Techno).
Carrying out of furnace and process validation with proper traceable documents and calibrating the metallurgical instruments with appropriate service parties as per schedule.
Job Location: Chikalthana MIDC, Aurangabad
Send CV on Career@paradiseplacement.co.in
for more details call on 7249840333
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.50 LPA
Implement all TS & ISO related Documents.
Critical spare part management, Development of local vendor .
All Govt. related activity of Electrical, EHS related paper.
Working on new cost cutting project, Kaizen & implementation.
Maintenance of 3 Axis CNC Pipe bending machine, Assembly line Conveyor
Maintenance of Weld shop containing Nash make Butt welding, Spot ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.16 LPA TO 2.64 LPA
Develops layout and plans sequence of operations for fabricating and assembling structural metal products,Applying trigonometry and knowledge of metal.Develops layout and plans sequence of operations for fabricating and assembling structural metal products,Applying trigonometry and knowledge of metal.Locates and marks bending and cutting lines onto work piece, allowing for stock thickness
JOB ...
1 Opening(s)
3.0 Year(s) To 8.0 Year(s)
4.00 LPA TO 6.00 LPA
Diploma or Degree in Mechanical or Instrumentation with 3 Yrs + Min experience in industrial product marketing. Primary responsibility of Product Manager is Business Development of that area and growing the sales numbers.The candidate will after learning the technical aspects of the products be involved in developing a road map ...
4 Opening(s)
Not Mentioned To 3.0 Year(s)
1.20 LPA TO 2.00 LPA
* Sales and Marketing of commercial gas.* T attend the Meeting with Hotel Industry & close the deal.
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.50 LPA TO 5.00 LPA
We Are Currently Looking for Gas Cutter Division For Steel Plant at w Africa Nigeria Location
Welder, Gas Cutter, Gas Welding, Gas Cutting, ITI WelderWelder, Gas Cutter, Gas Welding, Gas Cutting, ITI WelderWelder, Gas Cutter, Gas Welding, Gas Cutting, ITI WelderWelder, Gas Cutter, Gas Welding, Gas Cutting, ITI WelderWelder, Gas Cutter, ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
14.00 LPA TO 14.00 LPA
Job Description Summary
Lead Engineer Accessories Instrumentation will leverage his or her engineering and leadership skills to develop design packages that relate to the upgrade or retrofit of gas or steam turbines and generator accessories. They will mainly focus on the design integration of electrical and instrumentation systems with control hardware ...