1 Opening(s)
6.0 Year(s) To 8.0 Year(s)
8.50 LPA TO 10.00 LPA
Should be able to maintain CNC machines of machine shop like: Conventional machines, CNC milling, EDM and wire EDM.
Planning of maintenance i e. Preventive / Periodic / Predictive Maintenance with the co ordination of production schedule.
Planning of spare parts, but controlling store inventory
Maintenance of MCs like CNC M/C, SPM & ...
4 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Hiring for the post of Production Shift Supervisor
Experience: Min 3 Years in CNC Machines Shop
Education: BE Mechanical
JOB PROFILE:-
Daily work management (D.W.M.)and shift handling
Production planning and problem-solving
Rework, Rejection, and line through back monitoring.
Continuous improvement in the process to improve the quality point.
Wey Gauges periodic status monitoring on a monthly bases.
Cost-saving ideas for the improvement of the department.
Looking at the quality-related PM charts.
Ensure 1S-2S on the shop floor.
Daily KAIZEN for improving the process.
KEY SKILL:-
Knowledge about CNC Programming & Supervision.
Knowledge of operating and setting of SPC PM Chart.
Knowledge of RADIAL DRILL & another manual machine.
Knowledge of fixture setting.
Knowledge of MAPAL TOOL & TOOLING Setting.
Knowledge of Special Activities of rework of Crankshaft.
Job Location: Supa MIDC, Ahmednagar
if you are interested kindly send your updated CV on career@paradiseplacement.co.in
for more details call on 9765567505
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 3.60 LPA
Hiring for Upcoming Leading spring Manufacturing Industry at Waluj MIDC, Aurangabad
Position: Production Shift In-charge
Qualification: BE Mechanical
Experience: Min 3 Years in only Spring Manufacturing Industries
Salary Budget: up to 3.60 LPA
Responsibility:
Coiling and Grinding shift Engineer achieving production targets.
Production planning and control, on-time dispatches.
Manpower handling.
Productivity improvement with 100% Quality.
Responsible for inventory control.
Following FIFO throughout the factory.
Responsible for Rejection Control through SOP ( Standard Operating Process )
Calculating OEE.
Working on improving OEE.
Time study and Work-study.
Setting of New product on machine & approve it.
Key tasks handled during the tenure
To monitor & control the effective utilization of available resources in order to achieve Production Target
Production planning and control
Responsible for managing Overall Production, Day-to-Day Production activities & Ensure that Standard Production rates are followed.
Troubleshooting of Process / Production / Product related Problems.
Optimum utilization of resources like man & machine to achieve the production targets on a daily basis.
Guide the operator for various production activities to set the production process.
On line rework rejection monitoring through SOP (Standard Operating Process).
Monitor the Daily Production Report.
Coordination with internal departments like Tool Room, QA, Maintenance, Raw material Stores.
Maintain & Preparation of various documentation required for Quality Systems like TS 16949 & conduct Quality audits for other departments.
Training & awareness given about 5’S’ & safety in the shop floor.
Responsible for the quality in each cell.
Looking after TPM activities on the shop floor.
Maintaining 5S Activities in each cell.
GM BIQS team member.
If you are Interested kindly send your updated CV with applied subject
---------------------
Paradise ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Hiring for Spring Manufacturing Industry
Position: Maintenance Engineer
Education: Diploma / BE Mechanical
Experience: 2 to 5 Years in the Machine shop, spring
Salary: up to 18,000/- PM
Job Responsibilities : -
? Attending all Breakdown & Trouble Shooting in the shift.
? To deals with any modification of the machine.
? From mechanical side deals with shafts, gearbox, water pumps and machine assembly.
? Working ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 6.00 LPA
Hiring for the post of Production Head/ Production Manager
Experience: Min 5 Years in CNC Machines Shop
Education: DME / BE Mechanical
JOB PROFILE:-
Heading machine shop operations including M/C Utilization planning, production, in-process quality, new development and maintenance.
Leading the production and Process quality team of CNC shop which houses sophisticated CNC Drilling/Router machines to achieve productivity, quality, and ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 5.00 LPA
Hiring for the post of Senior Engineer Production
Experience: Min 5 Years in CNC Machines Shop
Education: DME / BE Mechanical
JOB PROFILE:-
Daily work management (D.W.M.)and shift handling
Production planning and problem-solving
Rework, Rejection, and line through back monitoring.
Continuous improvement in the process to improve the quality point.
Wey Gauges periodic status monitoring on a monthly bases.
Cost-saving ideas for the improvement of the department.
Looking at the quality-related PM charts.
Ensure 1S-2S on the shop floor.
Daily KAIZEN for improving the process.
KEY SKILL:-
Knowledge about CNC Programming & Supervision.
Knowledge of operating and setting of SPC PM Chart.
Knowledge of RADIAL DRILL & another manual machine.
Knowledge of fixture setting.
Knowledge of MAPAL TOOL & TOOLING Setting.
Knowledge of Special Activities of rework of Crankshaft.
Job Location: Supa MIDC, Ahmednagar
if you are interested kindly send your updated CV on career@paradiseplacement.co.in
for more details call on 7249840333 / 9765567506
3 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Hiring for Production Supervisor in Shafts, Axles, Bushes, Gears, Pinions, Sleeves, Hubs, Sprockets, Aluminum PDC Parts & Sub Assemblies Manufacturers in Aurangabad, Waluj MIDC..
Designation: Production supervisor
Education: DME / BE Mechanical
Must Required experience -
Set Up, Change Over, New Development, Programming, Wheel Change
Production planning & control.
Responsible for all manufacturing processes on the shop floor.
Attending daily review meeting with internal production Dept. to update ...
1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
0.00 LPA TO 0.00 LPA
Qualification: Diploma or BE in Mechanical or productionExperience: 4 to 10 yrs experience in Rotary Equipments,
Client profile: Our client has manufacturing unit in Pune and engaged in manufacturing of following equipments & projects.Products:1) Industrial Air Pollution control Equipment - Bag filter, Web Scrubber, Cyclones, Dust Extraction system2) Grinding Mills, Dynamic Classifiers3) ...
4 Opening(s)
2.0 Year(s) To 10.0 Year(s)
1.80 LPA TO 2.40 LPA
Post: Production Supervisor
Vacant Post : 4 Nos.
Interview Date:- 23 to 26 Dec 2018
Job Profile:
Operating / programming of VMC, CNC, conventional machine maintain 5S
Supervision and shift handling
Implement 5s and kaizen related activities
Improve cycle time for a no.of job in production
Responsible for production norms & with Quality for every operation.
Responsible for dept activities.
Defining a ...
10 Opening(s)
5.0 Year(s) To 8.0 Year(s)
2.40 LPA TO 3.00 LPA
Job Profile:
Maintenance of galvanizing line.
Maintenance of Maintenance of D.C. machines (up to 1600 KW DC motor.)
Maintenance of Maintenance of A.C motor (2500 KW AC motor.)
Maintenance of DC & AC Drives, power & auxiliary panels.
Maintenance of roll grinding machine
Attending Breakdown maintenance & shutdown maintenance.
Maintaining Safety aspects & House Keeping of the line.
Maintenance of crane.
Making technical Specifications and technology appraisal for plant equipment and utilities.
Maintenance of Ac Drive, Dc Drive like ABB, Allen Bradley, Siemens micro Master Drive, Tele mechanique Drive
BRM & WRM Electrical Maintenance
Successfully completed BAR MILL Project
Erection & commissioning of MCC,PCC, Transformers Drives
Control wiring from RIO to Field - Proxy, HMD and solenoid valves..
Did the communication wiring & Control wiring.
MCC Control wiring & RIO'S Termination & Cabling
AC motors installation & maintenance.
Encoders Cabling & Termination
OS Internal/External wiring
Wiring of Siemens PLC S7-400
Handled wiring of field devices like control valves, flow meters.
Looked after power cable laying & termination for power distribution panels (PCC & MCC), motors, transformers, Ac drives and HT panels. And control cables for PLC, RIO'S and various field equipment
Coordinated with SIEMENS & MORGAN for Commissioning of Bar Rod Mill
Hydraulic and Lubrications motor maintenance
EOT cranes & Magnetic cranes, Electrical maintenance & Troubleshooting
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
For more details call on 7249840333 / 9765567506
Send CV on career@paradiseplacement.co.in