7604 Job openings found

Post: Tool Room Head (Die Shop)   Education: BE / DME Mechanical Experience: 8 to 15 years in Hot Press forging (Press 1600ton, 2500ton, 1300ton) Salary Up to 6.00 LPA Job Profile : Responsible for providing finished dies to forge shop for production.  Handled development of new profile dies, round dies & tooling’s as per drawing.  Deftly followed up processes for preparing dies like die layout, VMC machining operations, and other conventional machines operation.  Actively participated in achieving forge shop production targets with appropriate problem-solving solutions to nullify it. Involved in the manufacturing & machining profile as well as round forging dies with tooling. Handled Follow up for raw material. Involved in the arrangement of schedule programmed for TPM circle meeting & give training to new joining employees on the shop floor. Supplying tooling as per drawing, records of inspection, maintain tool crib stock as per forging a plan, routing daily tool maintenance. Handled Vendor follow up, supplying materials to the vendor for machining & receiving it with finished dies within the required time, put inspection records for the same. Managed Records for die history card, scrap details, daily tool records for tool room. Issued cold & hot forging dies to production dept. Handled everyday planning of tooling for production, reduced manufacturing cost using proper tooling. Worked in the tool re-sharpening section and ordered new tools as per production requirement To plan &  utilize & control in a man with method & Machine with the material. Responsible for daily die mfg for cold forging, warm forging, and hot forging as per plan maintain back up dies for next plan.  Development of new warm & cold forging dies. Die shop vendor development. Documentation of ISO- 9001-2000. Specially working in cold forging die mfg. & Responsible for cold forging production. Maintaining TPM Related activities & document. Maintain material stock at every stage of die mfg. Controlled all ERP related activities. Plan a monthly production schedule. Plan monthly raw material. Daily & monthly plan related to PPC. Negoation with suppliers to meet quality & cost objective. Develop and improve supplier KPI Follow up with the supplier to get material in time. Maintain records of all suppliers related documents. Raise purchase requestions. Follow up with the accounting department for vendor payment Arrange transport for the collection of material Solve supplier related technical issues.  Job Location: Waluj MIDC, Aurangabad Send CV: Career@paradiseplacement.co.in for more details call on 9765567699

Job Description: We are seeking a .NET developer responsible for building .NET cloud applications using Web API 2.0, C# .net, Azure Services. Your primary responsibility will be to design and develop these layers of our applications, and to coordinate with the rest of the team working on different layers of the infrastructure. ...

Post : Quality Engineer Experience : Min 2 years in Quality Assurance / TPM Job Profile:          Handles TPM & Quality Documents as per Customer Requirement . Handles Customer Complaints Preparing Presentations of Rejection Analysis and presents it to the management. Conducting IPO & Process  Audits in order to continually refine the process Structure. Preparation of IPO & ...

Introduction – Dyson Dyson is a global technology company with a unique philosophy, led by James Dyson. We transform every category we enter with radical and iconic re-inventions that work, perform and look very different. As a technology and engineering pioneer, we currently operate in the categories of Floorcare, Environmental ...

Post : QA Engineer In Process - 04 QA Engineer Inward - 03 Education: BE/ Dip (Mech) Experience: 2-4 years            Keywords:  Fabrication / Weld Shop department experience candidates should be preferred  Job Profile QA Engineer Inward Conducting Process Audit, Product Audit, Supplier Audit as per plan. Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis. Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies. Monitoring In-Ward & Final Inspection. 1st piece in process inspection report & taking C.A. if any. In handling customer complaints and their solutions. To maintaining quality related document calibration report, Inspection report and etc. To take follow up on supplier corrective action reports. Preparing the control plan of In-Ward, Final& In-Process component. Preparing PPAP, PFMEA for new development components   QA Engineer In Process   Monitoring of special processes (Welding). Monitor & Handle Customer feedbacks & complaints. Handle all type of gauges and ...

Post: Design Engineer Experience: Have to experience Min 1year in “Fixture Design” which is used in the Automobile Industry.  Job Profile: Good knowledge of the Manufacturing processes Proficient In 3D Cad Modeling (Preferably UG- NX & Creo-v3 ) Make2D – 3D crosscheck of input data for required parts Good knowledge of new product development cycle and process and Product Life Cycle Management  Proficient in 3D modeling and drawing using CAD Software Good working Knowledge of GD&T,Design related calculations. Good Conceptual, problem solving and Analytical Skills. Should be Self-Motivated, Adaptive, Passionate about results and a Good Team Player. Excellent Communication and Presentation skills Key role in project planning. Assembling the fixture as per design standard. Assembly of standard parts i.e. Hydraulic Cylinders, Pushers, and Work support. Fixture to be proving up to customer end, Key role in project planning. Assembly of 4thaxis cradle arrangement Prepare the concept layout. Finalize the fixture with the proper guiding & location component. Efficiently drafting, detailing, the section with BOM, GD & T, Machining Symbols Hydraulic fixtures for VMC & HMC, Welding Fixtures, Relation Gauges, Dies Sets, PDC Dies, Press Tools, Plastic Moulds Skill:   Design of Jigs & Fixture Design of Press Tool Design of Mould Tool  Design of DCD Job Location: Waluj Aurangabad  More ...

Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact.  Must have Skills : SAP for Oil & Gas Production and Revenue Accounting  Good to Have Skills :  No Technology Specialty  Job Requirements : Must have: 1 Should have minimum experience of 8-10 years SAP Financial ...

Major Activities/Tasks Content Development (90%): Research the available product information from requirements, specifications and user stories Interview Business Analysts, Product Managers, Developers, QA Analysts, etc. to gather the necessary information Develop, publish and maintain defect-free end-user documents corresponding to release timelines. Interact with the cross-functional teams and learn the assigned product/application Abide by company, department and ...

QA Engineer (03No)   About the responsibilities of the Position: The main activity of the QA Engineer that he is responsible for all the Quality issues Reporting to: QA Head UACPL Educational Qualifications: Diploma in Engineering in the stream of Mechanical/ B.E (Mech.) Desired Experience: Up to 2 to 5 years experience in a Manufacturing company preferably in an Sheet ...

Develop and implement HR policies to create and sustain a work culture aligned with Values.Ensure legal compliance.Ensure effective implementation of Performance Management System.Report to the management and provide decision support Managing the Design, review and dissemination of Employee Policies2. Designing and reviewingHRSystems for Policy Compliance3. Ensuring timely delivery of relevant HR ...