1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
2.40 LPA TO 3.00 LPA
Job description
Roles and Responsibilities
handling operation & troubleshooting of all plant equipments in their dept. like HT LT panel, motor, MCV ,VCV, transformers, Switch gear, wiring, panel, circuits, PLC etc.predictive & preventive maintenance
Desired Candidate Profile
candidate should have good knowledge of maintenance of all equipments of electronics
qualifications: BE Electrical/diploma Electrical
Perks and Benefits
RoleWorkman/Foreman/Technician
Industry ...
1 Opening(s)
5.0 Year(s) To 6.0 Year(s)
3.60 LPA TO 4.80 LPA
Clearing electrical, hydraulic, pneumatic and mechanical break downs of the machines and equipments.
Daily inspection of machines, equipments using check sheets.
Routine inspection and maintenance of generators, compressors, transformers and other utilities based on check sheets. Maintain them healthy by timely servicing and repair.
Preparation and updating of list of critical spares and ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 4.00 LPA
Experience of teaching & programming an ABB, Panasonic robot.
Trouble-shooting & modification of Allen-Bradley Control Logix PLC programs, Mitsubishi PLC program.
Good knowledge of Allen- Bradley PLC5, SLC.
Working on servo motor and it's drive (Mitsubishi servo system).
Modification in electrical panel and PLC programs for eliminate the breakdown.
Looking over all the maintenance robots, ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Interview Date: 04/01/2019
Post: Maintenance Engineer 2 Nos.
Education: DME / DEE / BE
Experience: Min 3 Years
Interview Date: - 24 to 29 Nov. 2018
Job Responsibility:
Responsible for corrective, preventive & predictive maintenance of machines as per PM plan.
Responsible for attending any type of break down.
Responsible for operation & maintenance of all Facility & utility.
Safety assurance & changes in the electrical circuit to improve productivity.
Responsible for Internal & External Audits.
Machines handled- Hydraulic & Pneumatic Press Machine (50 to 500 Tons), High Speed Press (200 to 350 tons), High-Speed Notching machine,Shotblasting, Clating machine, Die Casting, Slating Machine CNC,MPI Machine, Grader machine, Milling Machine, VMC Machine, stapping Machine, Leth Machine, Harding Tempering, Electrical Furnace, Oil Furnace, Welding Machine (Spot & CO2), Tig Welding,And all electrical work etc.
Responsible for achieving the common goals of the department.
•Handle all daily basis problems related to Electrical.
•Daily check & update electrical energy consumption as per sheet.
•Preventive maintenance as per schedule.
•Training is given to new joining operators related to Electrical system of M/C.
•Focus on safety-related Keizens.
Job Location: Waluj MIDC, Aurangabad
Bus & Canteen facility not available
More details call on 9765567509 / 7249840222
2 Opening(s)
1.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 2.40 LPA
Post : Tool Maintenance Engineer
Education : BE (Mechanical / Production) , Diploma (Mechanical)
Experience: 2 to 4 years
Job Profile :
Responsible for cost reduction in Tool maintenance
Responsible for the new developments in tooling
To help Vendors in preventive tool maintenance
To coordinate with production teams of the unit as far as tooling is concerned
Responsible for ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 5.00 LPA
Position: Maintenance Engineer
Location: Masat - Silvassa
Experience: 3 - 5 Years
Industries: Plastic
Responsibilities:
Carry out routine maintenance work
Preventive Plan Maintenance
Basic knowledge of Transformer, Air Compressor, Lift & D.G.
Troubleshooting skills & root cause analysis
Advanced knowledge of mechanical & electrical.
Responsible for installation & Maintenance of industrial Equipment's.
Understanding of safety and ...
1 Opening(s)
0 To 1.0 Year(s)
1.20 LPA TO 1.80 LPA
Job description
Lift Maintenance Enggineer
Male
1
0 to 1
BE Electrical/Elect. Electronics
Roles and Responsibilities
- He must have good knowledge about the Lifts and its accessories.
- He should have the Technical capabilities to Find the Faults in the various circuits and fix it.- Electrical and electronics components knowledge is a must.
- Individually the technician have ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 306.00 LPA
Job description
HPS-2023/254
Mechanical Maintenance Engineer
Male
1
2 to 3
B.E Mechanical/DME
JOB SUMMARY -
Mechanical engineers produce specifications for, design, develop, manufacture, and install new or modified mechanical components or systems. Mechanical engineers need to be technically minded, able to demonstrate numerical and scientific ability and have problem-solving skills.
Role Project Manager-Production/Manufacturing/Maintenance
Industry Type Recruitment, Staffing
Functional AreaSite Engineering, Project Management
Employment TypeFull Time, ...
1 Opening(s)
0 To 3.0 Year(s)
2.64 LPA TO 3.00 LPA
Skill Set :
Technical Knowledge, Crises Management, Knowledge of Safety, Health &Environment
Responsibilities Carry out Maintenance as per plan
Maintain Documents on Maintenance to meet Statutory and ISO RequirementsProcurement of Spares and manage Inventory of Critical PartsCarry out routine checks to ensure optimum efficiency of MachineryKnowledge of PLCKRA's Maintenance SupervisionStatutory knowledge and skillsInventory ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
Not Disclosed by Recruiter
Job Description,
Maintenance and repair of all utilities, reactors and machineries.Electrical assistance to process and production team.Repair & maintenance of tool and tackles.Cabling and instruments connection in plant.Local item purchase for tools repair and maintenance.Internet and camera connection and maintenance.Factory appliance and asset (door, chair and drawers etc.) maintenance.Transporting instruments and ...