1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 5.00 LPA
Hiring for Tool Room Engineer/Technician for Electrical Lamination punching Tool Room
Post: Tool Room Engineer/Technician
Experience: Min 02-06 Years
Qualification: Diploma/B. Tech (Mechanical), ITI(Tool-Die maker(Die-moulds))
A diploma in Tool And Die Making from NTTF should be preferred.
Salary: up to 5 LPA
Job-Role & Key Responsibility:
Development of tools, progressive tool, ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
TOOL DESIGN STAMPING
LOCATION KOCHI- Candidate will be based in FCI cochin site
Experience: 8 - 10 years
Education: Post Diploma / Diploma in tool design or Tool & die making from (NTTF /IGTR / GTTC)
ROLE-
- Initial study of product drawing / Strip Layout / Assembly drawing- Mfg. feasibility as per drawing requirement ...
14 Opening(s)
Not Mentioned To 15.0 Year(s)
1.80 LPA TO 7.00 LPA
Company Profile: A company located at North Maharashtra, a 25 yrs. experienced company in Sheet metal, DBs, & Precise Press Component
Manufacturing of switchgear component, progressive press tool and moulds at Jalgaon MIDC is looking for experienced
Candidates for their expansion & exiting requirements as under
Required Positioned as under
1) DM / AM ...
2 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.60 LPA
Hiring for Tool Room Production Supervisor in Press tool Manufacturing Industry
Department: - Tool Room
Experience: 3 to 5 Years
Responsibilities:-
1 Responsible for Planning of Tool & Dies production
2 Responsible for Tool trial, buy-off & try out.
3 Project Strategy & Capacity planning for new projects
4 Constantly follow up of new tool manufacturing with ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Hiring Press Tool Maintenance Engineer in Automobile Auto Ancillary Parts Manufacturing Industry
Position: Press Tool Maintenance (02)
About the responsibilities of the position: The main activity of the Tool Maintenance supervisor is to assist the in charge of all of the maintenance of tools & fixtures.
Educational Qualifications: Bachelor of Engineering in ...
2 Opening(s)
4.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.00 LPA
Design-Tool Room Engineer : Experience 4 to 7 Years Experience in Press Tool
Software - Auto CAD,UGnx,Catia
Education : DME / BE
Job Role:
Experience of press tool with progressive die.
knowledge of simulation-Press Tool Simulation.
Cutting tool wire cut/ 3 D laser cutting programs.
Drafting and detailing of tools with Casting pattern knowledge.
Tooling design w.r.t.GD&T.
Need sign 3 yrs ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
2.40 LPA TO 5.00 LPA
Post :
Press Tool Design Engineer - 01
Press Tool Sr. Engineer -01
1) Over all experience minimum 3-4 years/ 6-8 years
2) Progressive tool design
3) Casting structural tool design
4) Hand on Catia ,UG and AutoCad softwares
Education : Mechanical Engineer or IGTR
Location- Shendra MIDC, Aurangabad (MH)
for more details call on 7249840222
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 6.00 LPA
Hiring for Asst. Manager – Production in Tube Notching Machine, Welding Machine, Panel Bending & Rolling SPM, Progressive Press Tool, Transfer Line Press Tool, Conventional Press Tool, Robotic Welding Fixtures manufacturing Industry
Vacancy: 01 (Male Only)
Experience: – 5 To 10 Years
Qualification: Diploma + B.E Mechanical.
Salary Budget: No Salary Bar For Right ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.60 LPA TO 4.00 LPA
Design Engineer (Press Tools)
Mandatory Skills
1) Sound Experience about Sheet Metal Conventional/ Progressive Press tool Design and Manufacturing.
2) Design and validation of Heavy Sheet metal (A/B/C Class Parts) Casting base structure tools.
3) Design and validation of Fine Blanking tools.
4) Design and validation of Hot Forming parts/tools.
5) Design and validation of Welding ...
1 Opening(s)
4.0 Year(s) To 7.0 Year(s)
4.00 LPA TO 6.00 LPA
Senior Design Engineer (Press Tools)
Mandatory Skills
1) Sound Experience about Sheet Metal Conventional/ Progressive Press tool Design and Manufacturing.
2) Design and validation of Heavy Sheet metal (A/B/C Class Parts) Casting base structure tools.
3) Design and validation of Fine Blanking tools.
4) Design and validation of Hot Forming parts/tools.
5) Design and validation of ...