6 Opening(s)
3.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 4.00 LPA
Shift In Charge – PC (Unit 02)Desired Candidate profile:Should have experience in a Chemical Manufacture unit, Knowledge of DCS operation,Knowledge of SAP.Desired Experience: Minimum 3-5 years of experience.Desired Qualification: BE ChemicalJob Type: Full-timeSalary Range: Upto 3.60 Lakh PAJob Description:?OPENING FOR SHIFT IN CHARGE(FIELD)Job Description? Handling shift and smooth operations like ...
12 Opening(s)
5.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 5.00 LPA
Qualification: B.Sc/M.Sc/Diploma Chemical Engineer Experience: 3 to 6YearShould Have Knowledge & Experience as Production Supervisor1. Pre-commissioning / Commissioning of new plant2. Production & Operationa) Preparation of Daily production reportb) Knowledge of yield calculationc) Monitoring & accountability of utility consumptiond) Experience of involvement in resolving trouble shooting activity inoperation.3. Must have ...
3 Opening(s)
3.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 4.50 LPA
Qualification: B.E Chemical Engineer. Experience: 4 to 7 YearShould Have Knowledge & Experience as Production Executive/Shift Incharge1. Pre-commissioning / Commissioning of new plant2. Production & Operationa) Preparation of Daily production reportb) Knowledge of yield calculationc) Knowledge of mass balance & energy balanced) Monitoring & accountability of utility consumptione) Experience of ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 4.00 LPA
Experience Diploma or BE Mechanical
knowledge for Manufacturing Process, Engineering concepts should be clear.
must have experience in working on shop floor.
Achieving desired Productivity targets within target rejection percentage.
Reducing number Of manpower by going for automation and other Lean techniques.
Reduce production cost and batch time
Daily Production Report
Capacity analysis
Daily Machine Check Record
Material Consumption ...
2 Opening(s)
4.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.00 LPA
Job Details
4 to 7 Yrs. Experience Diploma or BE Mechanical
engineer should have knowledge for Manufacturing Process, Engineering concepts should be clear.
must have experience in working on shop floor.
Achieving desired Productivity targets within target rejection percentage.
Reducing number Of manpower by going for automation and other Lean techniques.
Reduce production cost and batch ...
6 Opening(s)
1.0 Year(s) To 7.0 Year(s)
1.80 LPA TO 3.00 LPA
We are manufacturer and supplier of Plastic Carboys & Drums We require a Production / Shift Supervisor in our existing Plant located at Bhoyan Moti Taluka - Kalol, Dist. Gandhinagar & also require shortly upcoming our plant at Dahej.
Production / Shift Supervisor
Education : B.E./Diploma / ITI
Plastic -Mechanical - Electrical Engineer
Experience : ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 6.00 LPA
Position: Asst. Manager - Production
Location: Silvassa
Experience: 8-10 Years
Industries: Pharma
Responsibilities:
Daily Target Vs Actual monitoring.
Final review of BMR/BPR
Daily Production Report
Yield Statement
Filling of QMS documents
Ensure smooth operations in all the production lines
Required Skills :-
Managing people and equipment.
Process safety knowledge
Required Qualification: B.Pharm/M.Pharm/B.sC/M.sc - Chemistry
Salary:- ...
6 Opening(s)
1.0 Year(s) To 8.0 Year(s)
2.00 LPA TO 3.60 LPA
Production planningShifts Manpower planning and executionTroubleshootingPrepare production report5S and KaizenISO documentation Ensure product quality
Can monitor and execute the production activities by deploying and ensuring adherence of set engineering process norms
Understanding engineering, scientific and other technical information (Circuits readings, PCB viewing and Mechanical drawing readings)
Well versed with manufacturing practices
Good understanding of ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
2.40 LPA TO 3.60 LPA
Department: MOULD PRODUCTION
Place: BAPL 3K Aurangabad
Designation: Jr. Engineer
Qualification: BE/DME
Job Skill required:
1 Basic Knowledge of Injection Moulding Process.
2 Knowledge Of Polymer Material.
3 Basic Knowledge of Machine And Mould Maintenance.
4 Knowledge of post molding operations.
5 Knowledge of assembly line handling
6 Knowledge of JH
7 Process Optimization
Roles and responsibilities:
1 Stage wise/cell wise man power ...
20 Opening(s)
0 To 3.0 Year(s)
2.00 LPA TO 4.00 LPA
Verify Production Run Package information for accuracy
Supply Slitting Team with set up and process instruction
Verify correct coils are supplied for the production run performing required verification checks
Ensure slitter set up is correct including gamma gauge monitoring equipment
Process coils ensuring quality and customer tolerances are adhered to
Complete all associated documentation and ...