1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
7.00 LPA TO 8.50 LPA
) Develop, implement and maintain QMS, EMS, OH&S
2) New customer specification feasibility report
3) Maintaining customer technical specification, drawings records and documents
4) Preparing techno commercial offer
5) Conducting internal ISO audits
6) Preparing agenda and minutes for MRM
7) Monitoring departmental KPI
8) Develop and maintain ISO manual, sop, work instructions, process flow chart, QAP
9) ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 7.00 LPA
Experience as a Quality Controller in Plastics, (Injection Moulding) Rubber, Sheet Metal,Fabrication, Die Casting, Forging and Wire & Wiring Harness component.• Finding root cause analysis of customer complaint & providing 8D report with takingproper action at in-house.• Resolved Customer complaints, Initiate CAPA on non-conformities on time• Monitoring & controlling of ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
12.00 LPA TO 15.00 LPA
Job description
Hands-on experience in Needle punching Required Candidate profile Non-Woven.Responsible for monitoring & maintaining quality & compliance targets to ensure high standards of quality.Promoting quality achievement & performance improvement organization
Required Candidate profile
Develop, implement, communicate, and maintain a quality plan to bring the Companies.• Hands on experience in PPAP, APQP, FMEA, ...
1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
15.00 LPA TO 16.00 LPA
.Distribution of work load to operators in order to achieve daily production target.
.Planning day to day production to achieve maximum production.
.Organizing daily work at shop floor.
.Working on CLF Injection Moulding System of various types of tonnage capacity like TX 750T,400T,230T,120T 285T,225T, Kabra Blown Film Extrusion, Stretch Film Extrusion.
.Handling DG Like ...
1 Opening(s)
3.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 6.00 LPA
Improve supplier quality by implementing supplier development initiatives such as supplier audits, Trainings, supplier scorecards, 8Ds etc.
Develop parts. Ensure on time and first time right. Follow PPAP process.
Drive cost reduction programs through VAVEs at supplier end.
Monitor and improve product quality using various tools such as customer feedback, product and process ...
1 Opening(s)
0 To 5.0 Year(s)
1.00 LPA TO 8.00 LPA
Job Description:Designation: CMM Engineer -QAQualification: BE MechExperience Required: 2-3 YearsJob Description:Having experience in Job Inspection, Defect Analysis,
SPC, Experience of ISO & TSAccurate CMM Operating, Design software'sExposure to any particular industry or area of
work Shocker ManufacturerLocation: Waluj MIDC, Aurangabad---------------------if you are interested kindly share your resume tofor more details 9765567505 / 7249840333
1 Opening(s)
0 To 5.0 Year(s)
1.00 LPA TO 5.00 LPA
Press Shop operations with Progressive tools and Hi Speed presses.Hands on experience in tool setting machine parameter is must.> Experience Plan and execute production target in press shop.> Should be well versed in Production planning and utilisation of resource including operator efficiency.> Manpower & their grievance handling.> Control online rework/ ...
5 Opening(s)
4.0 Year(s) To 7.0 Year(s)
Not Disclosed by Recruiter
Position: Maintenance/CMMS System Engineer
Experience: 4-7 years
Availability: 30 days
Responsibilities:
To lead the Maintenance System administration & deployment for ams OSRAM’s most advanced 200mm Wafer
Fabrication start-up site to be constructed in Kulim, Malaysia.
The Maintenance system(s) are namely, SAP PM, OPRA, Computerized Maintenance Management System
(CMMS) and Augmented Reality (AR) for maintenance activities will be ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 4.00 LPA
Job description
Job Role :-
Guidance to Engine,Transmission and propitiatory parts vendors for improving and standardization of the following processes and their controls for sustenance of Quality.
a) Casting (Aluminium Ferrous)
b) Forging (Hot, Warm Cold)
c) Machining (Turning, Milling, Grinding etc.)
d) Assembly
Job Responsibilities :-
New model Engine,Transmission and propitiatory parts PFMEA
Weak area identification at Engine,Transmission and ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.60 LPA
JOB DESCRIPTION
Production
Male
1
4 to 5
BE Mechanical / DME Mechanical
Salary : 20000 to 30000
Location : Umbergaon Gujarat
Roles and Responsibilities
To measure dimensions using Vernier, Micrometer & VMM machine.
Should have Knowledge in SPC, 8D, read & understand engineering drawings , rejection analysis.
Knowledge of ISO documents.
Desired Candidate Profile
Diploma in Mechanical engineering