2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
2.40 LPA TO 3.00 LPA
Job description
27/04/24
HPS/2024/264
VMC Operator
Male
2
1 to 2
ITI/DME
basic knoweldge of production planning
good knoweldge of vmc machine operation programming
able to handle all the machine production
working experience of mesurement tools
understanding of mechainical design
10 hour shift time
qualification:iti fitter / turner / machinist / cnc/vmc
RoleTrainee
Industry TypeIT-Software, Software Services
Functional AreaProduction, Manufacturing, Maintenance
Employment TypeFull Time, Permanent
Role CategoryOther
Education
UG :Any Graduate in Any Specialization
PG ...
1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 4.00 LPA
Location :- Markal
knowledge about Selection of tools according to operations
Knowledge about Operating and ProgrammingCNC &VMC machines.
Knowledge aboutJob settingCNC &VMC machines.
CNC & VMC programming & of Fanuc and Mitsubishi controls etc.
2D Programming on VMC.
All Machine Shop Dept. Problem-solving
Programming of new parts
Managed and supervised CNC & VMC Operators.
Programmed and set up machines ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.24 LPA
JD for VMC Jr. Programmer
Designation : VMC Jr. Programmer
Qualifications : Diploma Mechanical+ CNC/VMC Program.
Experience : 2 To 5 Years
REQUIREMENT FOR JR.PROGRAMMER
FIXTURE DESIGNING FOR DIFFERENT JOB
DRAWING READING
MACHINE SELECTION FOR AS PER DRAWING
HOW MUCH SETUP REQUIRED AS PER DRAWING
SYMBOLS AND GAUGE IN DRAWING
TOOLING KNOWLEDGE AND ITS PARAMETER
CORRECT WORK OFFSET USE IN MACHINE
CAD / CAM ...
8 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 3.00 LPA
Job Location- Bhosari Pune
Job Profile:
JOB DESCRIPTION
Job Description :Job Description:Position: VMC OperatorEducation: ITI / DMEExperience:2 to5 Years of experience in VMC OperatingNumber of Vacancies: 02Salary : upto 2.40 Lac(s)Job Profile:CNC Programming of Fanuc Control SystemVMCProgramming of Fanuc control system.OperateVMCandCNCMachine.Job set up.Daily production report.OperateCNC andVMCmachine of the Fanuc control system.
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
JOB DESCRIPTION
CNC-VMC Machine Operator
male
1
1 to 2
ITI Fitter/CNC/VMC
Salary : 15000 to 20000
Location : Dadra & Nagar Haveli
Roles and Responsibilities
Client provides you the best range of all types of cnc work, special purpose machines & pharmaceutical change parts with effective & timely delivery.
1. OPERATING VMC MACHINES
2. GETTING SETTING APPROVALS.
3. DAILY PRODUCTION ACTIVITIES.
4. ...
9 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
Interview Start from 6th June 2018
Post : Setter Supervisor or Associate Engineer
Company Profile : Crankshaft, Steering knuckle and front axle beam
Education : ITI / DME
Experience : 2 to 5 Years for DME & 7 to 12 Years for ITI
Number of Vacancy : 05
Salary : upto 3.00 Lac(s)
Job Profile:
CNC Programming of Fanuc Control System
VMC Programming of Fanuc ...
15 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Job Description:
Programme Understanding for CNC turning machine, VMC & HMC machine
Understanding & Knowledge of Coding (M Code & G Code)
Knowledge of Drilling & Tooling for CNC/VMC/HMC
Hand on experience on Job Setting is mandatory
Knowledge of cycle programing CNC/VMC/HMC
Drawing Reading (Run Out, Surface value, Operations knowledge, hole position etc.)
Knowledge for types ...
5 Opening(s)
8.0 Year(s) To 12.0 Year(s)
4.00 LPA TO 5.00 LPA
Dear Candidates,
We are hiring for VMC/HMC Setter with minimum 8 years of experienced Candidates
Job Description:
Correcting problems in setup, non-conformance, tooling, and machining processes
Setting up and operating VMC/HMC machines to produce parts according to engineering drawings and specifications
Performing tool changes, adjustments, and machine calibration to ensure optimal machine performance
Monitoring machine ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
1.98 LPA TO 2.76 LPA
VMC Operator’s Experience:-
Minimum 5 years of experience in VMC Machine Operating.
Experience should be in Mold Making or various types of case to case Milling jobs.
Should be conversant with Fanuc and Mitsubishi Controllers.
Should be conversant at taking Tool Offset & Job Offset from various positions.
Qualification:-
Minimum ITI (Fitter/Turner/Machinist) Pass, CNC or VMC ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.20 LPA TO 3.00 LPA
Job description
26.05.24
HPS/2024/319
VMC Operator & Programer
Male
1
2 to 3
ITI Fitter/DME
Urgent requirement for vmc programmer cum operator, mitshibushi m80 controller and Camworks software or delcam software, experience minimum 2-3 yrs in die mould industry.
Fresher with institute training of vmc operating can also apply .
Location : Dadra and nagar haveli
Salary : for experienced candidate ...