7136 Job openings found

1. Atleast 3+ years of experience developing world class user interface for consumer internet, preferably in eCommerce.   2. Hand's on experience in web Development using HTML5, HTML, CSS, JavaScript, jQuery, etc.   3. Experience in designing mobile site and mobile application is added plus.   4. Strong understanding how design impacts performance on the end ...

Hi All, Please start submitting profiles for the Front End Specialist Sr. Developer. Below mentioned is the JD.If any clarification needed, please reach out to me.Mandatory Skills:-Strong Core Javascript skills, with 5 to 8 years of Core JavaScript Development experience.Experience working in an Agile environment.Good at mentoring the team and advocating best development practices.HTML5, HTML ...

Post: Tool Room Head (Die Shop)   Education: BE / DME Mechanical Experience: 8 to 15 years in Hot Press forging (Press 1600ton, 2500ton, 1300ton) Salary Up to 6.00 LPA Job Profile : Responsible for providing finished dies to forge shop for production.  Handled development of new profile dies, round dies & tooling’s as per drawing.  Deftly followed up processes for preparing dies like die layout, VMC machining operations, and other conventional machines operation.  Actively participated in achieving forge shop production targets with appropriate problem-solving solutions to nullify it. Involved in the manufacturing & machining profile as well as round forging dies with tooling. Handled Follow up for raw material. Involved in the arrangement of schedule programmed for TPM circle meeting & give training to new joining employees on the shop floor. Supplying tooling as per drawing, records of inspection, maintain tool crib stock as per forging a plan, routing daily tool maintenance. Handled Vendor follow up, supplying materials to the vendor for machining & receiving it with finished dies within the required time, put inspection records for the same. Managed Records for die history card, scrap details, daily tool records for tool room. Issued cold & hot forging dies to production dept. Handled everyday planning of tooling for production, reduced manufacturing cost using proper tooling. Worked in the tool re-sharpening section and ordered new tools as per production requirement To plan &  utilize & control in a man with method & Machine with the material. Responsible for daily die mfg for cold forging, warm forging, and hot forging as per plan maintain back up dies for next plan.  Development of new warm & cold forging dies. Die shop vendor development. Documentation of ISO- 9001-2000. Specially working in cold forging die mfg. & Responsible for cold forging production. Maintaining TPM Related activities & document. Maintain material stock at every stage of die mfg. Controlled all ERP related activities. Plan a monthly production schedule. Plan monthly raw material. Daily & monthly plan related to PPC. Negoation with suppliers to meet quality & cost objective. Develop and improve supplier KPI Follow up with the supplier to get material in time. Maintain records of all suppliers related documents. Raise purchase requestions. Follow up with the accounting department for vendor payment Arrange transport for the collection of material Solve supplier related technical issues.  Job Location: Waluj MIDC, Aurangabad Send CV: Career@paradiseplacement.co.in for more details call on 9765567699

Job Description: We are seeking a .NET developer responsible for building .NET cloud applications using Web API 2.0, C# .net, Azure Services. Your primary responsibility will be to design and develop these layers of our applications, and to coordinate with the rest of the team working on different layers of the infrastructure. ...

Post : QA Engineer In Process - 04 QA Engineer Inward - 03 Education: BE/ Dip (Mech) Experience: 2-4 years            Keywords:  Fabrication / Weld Shop department experience candidates should be preferred  Job Profile QA Engineer Inward Conducting Process Audit, Product Audit, Supplier Audit as per plan. Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis. Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies. Monitoring In-Ward & Final Inspection. 1st piece in process inspection report & taking C.A. if any. In handling customer complaints and their solutions. To maintaining quality related document calibration report, Inspection report and etc. To take follow up on supplier corrective action reports. Preparing the control plan of In-Ward, Final& In-Process component. Preparing PPAP, PFMEA for new development components   QA Engineer In Process   Monitoring of special processes (Welding). Monitor & Handle Customer feedbacks & complaints. Handle all type of gauges and ...

Qualification: Diploma / BE in Electronnic, OR Bsc / Msc in ElectronicExperience: 0 to 2 yrs Job profile:Experience building high-quality Embedded Products with best practices.Experience in architecture definition, detailed design & complete hardware development cycle.Development of high speed board design in embedded domain.Ability to develop new approaches to complex design problems.Participate ...

Post: Design Engineer Experience: Have to experience Min 1year in “Fixture Design” which is used in the Automobile Industry.  Job Profile: Good knowledge of the Manufacturing processes Proficient In 3D Cad Modeling (Preferably UG- NX & Creo-v3 ) Make2D – 3D crosscheck of input data for required parts Good knowledge of new product development cycle and process and Product Life Cycle Management  Proficient in 3D modeling and drawing using CAD Software Good working Knowledge of GD&T,Design related calculations. Good Conceptual, problem solving and Analytical Skills. Should be Self-Motivated, Adaptive, Passionate about results and a Good Team Player. Excellent Communication and Presentation skills Key role in project planning. Assembling the fixture as per design standard. Assembly of standard parts i.e. Hydraulic Cylinders, Pushers, and Work support. Fixture to be proving up to customer end, Key role in project planning. Assembly of 4thaxis cradle arrangement Prepare the concept layout. Finalize the fixture with the proper guiding & location component. Efficiently drafting, detailing, the section with BOM, GD & T, Machining Symbols Hydraulic fixtures for VMC & HMC, Welding Fixtures, Relation Gauges, Dies Sets, PDC Dies, Press Tools, Plastic Moulds Skill:   Design of Jigs & Fixture Design of Press Tool Design of Mould Tool  Design of DCD Job Location: Waluj Aurangabad  More ...

Senior Principal Engineer(.NET)Primary Responsibilities: Propose, Pitch, sell, implement and prove success in continuous improvement initiatives Ability to review frameworks and design principles towards suitability in the project context Review code for quality and implementation best practices Promote coding, testing and deployment best practices through hands on research and demonstration Be a part of the Agile ...

Major Activities/Tasks Content Development (90%): Research the available product information from requirements, specifications and user stories Interview Business Analysts, Product Managers, Developers, QA Analysts, etc. to gather the necessary information Develop, publish and maintain defect-free end-user documents corresponding to release timelines. Interact with the cross-functional teams and learn the assigned product/application Abide by company, department and ...

Job description:   Responsibilities:  Member of the Engineering team focused on technical design and product development  Works closely with the product owners and technical leaders to help develop solution architecture, core system components and proof of concepts  ï‚· Contributes to building and maintaining the solution frameworks (architecture & design) that support multiple implementations  Works ...