1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 6.00 LPA
Key Responsibilities for Chemical Operator :
Operate and monitor chemical process equipment and production systems.
Prepare, handle, and dose chemicals as per process requirements and SOPs.
Monitor process parameters and maintain production quality standards.
Conduct routine testing and analysis of raw materials, intermediates, and finished products.
Ensure compliance with safety, health, environmental, and quality standards.
Maintain ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
A Production & Dispatch Operator manages factory machine operations, monitors product quality, and coordinates the packaging, documentation, and shipping of finished goods to customers.
You can adapt the comprehensive template below for your hiring needs:
Job Overview
Role Title: Production & Dispatch Operator
Department: Manufacturing / Logistics / Operations
Employment Type: Full-Time
Reporting To: Production Manager ...
- Security Cum Safety Officer
- Security & Safety Officer
- Safety Officer
- Security Officer
- Industrial Safety Officer
- Security Supervisor
- Safety Supervisor
- Security Incharge
- Safety Incharge
- Security Manager
- Safety Executive
- Ehs Officer
- Hse Officer
- She Officer
- Health Safety Environment Officer
- Plant Safety Officer
- Factory Safety Officer
- Industrial Security Officer
- Fire & Safety Officer
- Security And Fire Safety Officer
- Security Operations
- Industrial Security
- Plant Security
- Factory Security
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
0 To 5.0 Year(s)
1.80 LPA TO 2.04 LPA
Job Summary: Responsible for managing vehicle entry/exit, dispatch documentation, gate passes, material movement records and coordination with the Dispatch, Security, Weighbridge, Loading and Transport teams. Ensure that all vehicles and materials are properly verified and dispatched as per company procedures.
Key Responsibilities
Manage vehicle entry and exit at the dispatch gate.
Verify truck/vehicle ...
5 Opening(s)
1.0 Year(s) To 9.0 Year(s)
1.00 LPA TO 3.00 LPA
Vacancy – 3 Nos
Salary – 30,000 to 32,000 PM
Experience – 3 years
Must have knowledge of loom machines
Role/Designation : Loom Operator
Department : OWI Weaving
Reporting to : Loom Master
Job Summary :
Loom Operator is responsible for operating and monitoring looms to produce high-quality webbings.
Core work:
Loom Operation: Operate their assigned looms.
Quality Monitoring: Monitor quality ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 4.50 LPA
Job Summary We are seeking a skilled and detail-oriented VMC Operator to join our manufacturing team. In this role, you will be responsible for setting up, operating, and maintaining Vertical Machining Centers (VMC) to produce high-precision parts. The ideal candidate will have strong technical knowledge of CNC/VMC machinery, the ability ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
Job Description
We are looking for a Computer Operator with 2–3 years of experience to handle day-to-day computer operations and documentation work. The ideal candidate should have good typing speed, strong computer knowledge, and proficiency in MS Excel and MS Word.
Key Responsibilities
Handle document related work.
Prepare, update, and maintain documents and records.
Enter ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.50 LPA TO 3.50 LPA
JOB DESCRIPTION
Job Title: Operator – CNC machine
15.07.26
140853
HPS/2026/606
CNC Machine Operator (Marble)
Male
1
2 to 3
ITI
8 Hrs
Location: Silvassa
To operate CNC Machine & quality inspection
Principal Accountabilities:Resin line1) To follow the work instruction of the machine operation and process parameters.2) Controlling the machine operation and process parameters and maintain it.3) Selection and mounting of tools according to design ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
5.00 LPA TO 5.00 LPA
JOB DESCRIPTION
Job Title: Operator – Forklift & hydra
15.07.26
140849
HPS/2026/603
Hydra/Forklift Operator (Marble)
Male
1
2 to 3
ITI
8 Hrs
Department: production
Purpose of Job: To operate the Forklift & hydra.
Principal Accountabilities:1)To follow the work instruction of the machine operation.2) Shifting of slab for processing and on Outside angle.3) Ensure the proper and safe working of the machines & equipment’s.4) Providing the ...
6 Opening(s)
4.0 Year(s) To 5.0 Year(s)
4.50 LPA TO 4.50 LPA
JOB DESCRIPTION
Job Title: Operator- Gangsaw machine
15.07.26
140847
HPS/2026/602
Gangsaw Operator (Marble)
Male
6
4 to 5
ITI
8 Hrs
Department: Production
Purpose of Job: To operate the Sawing machine.
Principal Accountabilities:1) Controlling the machine and process parameters.2) To follow the work instruction of the machine operation and process parameters.3) Checking block strengthen and ensure proper loading & cutting cycle, follow upon input material.4) Ensure the ...