1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
Control the breakdown maintenance and maximum utilization men and m/c.
To make annual preventive and predictive maintenance schedule of machines and revised as per requirement.
Implementation of conditioned based maintenance.
Poke –Yoke and continuous in
Team leader of kaizen implementation in the Plant.
Daily morning meeting with production department.
Major break down analysis report monthly basis.
Allocation ...
2 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.80 LPA TO 3.00 LPA
Hiring for Maintenance Engineer in Aurangabad.
Designation: Maintenance Engineer
Education: DME / B. Tech Electrical/ Diploma Electrical
Must Required experience - Cnc Machine Shop
Experience: Min 03 Years
Responsibility
Total machine shop maintenance, breakdown attend, & preventive maintenance
Work done on CNC Machines like LATHE, Grinding, Milling, Turning Machines (Makino, AMS, Jyoti), Etc.
Route Cause Analysis Report making.
Preventive Maintenance check sheet up-gradation.
Electrical ...
3 Opening(s)
5.0 Year(s) To 8.0 Year(s)
Not Disclosed by Recruiter
Having working experience of electrical maintenance.
Maintaining and Conducting Breakdown Maintenance, Preventive Maintenance Activities in Line Conveyor, Chassis Assembly Line Conveyor and Press Machines.
Recommended Modification to the Fixtures to Reduce the Process Cycle Time .
Maintenance of PLC, SERVO,VFD's.
Dismantled defective machines and equipment and installed new or repaired parts.Maintenance the PCC and ...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.50 LPA TO 1.80 LPA
- Diploma in mechanical, Electrical with 1 to 4 yrs experience in injection mold / rubber molding machine maintenance. - To carry out preventive and break down maintenance of injection molding machines. - To work closely with the Production team in reducing machine idle time.- Experience in hydraulic and pneumatic ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
2.00 LPA TO 2.50 LPA
of Preventive Maintenance as per scheduled.
Spare Parts Planning and Maintaining of key Spares for reducing the Breakdown trends. Injection molding , blow molding, PVC coating machine, water circulation plant Utility machine.
Clint meeting, AMC documentation VRB system, DG set, Fire safety system
Continual improvements to minimize the Breakdowns and maintenance cost by ...
4 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Electrical and Mechanical Maintenance Fitter with 1 to 7 years Experience
8 hours duty No Vehicle Facility to and fro
mfg of Textiles Industries with the objective of providing world class geosynthetic products and services to enable owners,
consultants and contractors to design and implement reliable, economic and easy to construct solutions for a wide ...
3 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.60 LPA
Interview Date : 06/06/2018 to 8/05/2018
Post :
1.Maintenance Engineer Electrical - 02
Salary : upto 3.60 Lac(s)
Education : Diploma Electrical / BE Electrical
Job Profile :
1. Maintenance Electrical Engineer
1) Hand on CNC, VMC, HMC machine, Convention machines – SPM. Troubleshooting.
Works on Fanuc , Siemens, PLc Drive, Mitsubishi,
2) Updating document such as PM Check ...
1 Opening(s)
0.6 Year(s) To 6.0 Year(s)
1.00 LPA TO 3.00 LPA
Candidates should have installation or maintenance experience with textile spinning machines.
Electrical Maintenance of spinning machines.
Travelling is mandatory.
Knowledge in Electrical Panel Maintenance.
Have to Sign 3.6 yrs of agreement with company.
Knowledge about Spinning Machines
Aggregate should be 60%.
Candidate should have good communication in English.
Qualification - B.E. /Diploma (Electrical / Electronics / ECE)
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 4.00 LPA
Position: Electrical Engineer
Location: Daman
Experience: 2 - 3 Years
Industry: Plastic
Responsibilities:
To analyse the system thoroughly for implementation and reduce the downtime.
To handling manpower.
To handle shift independently.
Root cause analysis of repetitive BD and provide solution.
Should have knowledge of programming and connections of AC and DC Drives.
Basic understanding of PLC and HMI ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.68 LPA TO 2.50 LPA
Install, maintain and repair electrical control, wiring, and lighting Perform electrical maintenance.
Regular Inspections of electrical components.
Troubleshoot electrical issues using appropriate of testing devices.
Repair and replace equipment, electrical wiring, or lighting.
Circuit breaker corrective maintenance.
Good knowledge of various testing equipment.
Control panel wiring
Electrical control panel wiring
maintain electrical or electronic wiring, equipment and fixtures, ...