1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 2.40 LPA
Position: Machine Operator
Location: Vapi
Experience: 2 - 3 Years
Industries: Engineering
Responsibilities:
To manage day to day maintenance of the plant.
Fault finding of all mechanically performed Equipment’s.
Preventive & Breakdown Maintenance of all utility & process equipment’s to be carried out & recoded as per check ...
2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
3.00 LPA TO 3.60 LPA
Position: Service Technician
Location: Vadodara
Experience: 1 - 2 Years
Industries: Engineering
Responsibilities:
Install, configure, and commission engineering equipment and systems (e.g., mechanical, electrical, instrumentation, automation, etc.)
Perform routine and preventive maintenance to ensure optimal equipment performance.
Diagnose technical problems and determine proper solutions ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
5.00 LPA TO 7.00 LPA
Key Responsibilities
Support & assist Operation Manager.
Coordination with site team and taking daily updates and recording the same.
Preparing DSR, WSR & MSR and submission to operation manager.
Track daily progress and share updates through regular reports.
Raise concern for any delay or improper working at site.
Handle all service-related documents and help with billing.
Preparing ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
12.00 LPA TO 15.00 LPA
Key Responsibilities
Manage daily operations and maintenance at ONGC sites to reduce downtime and improve work efficiency.
Coordination with site Engineers & Technicians for daily updates of consumables, tools, equipment, etc.
Remotely managing the operation parameters and equipment health status.
Plan and carry out maintenance work (regular, predictive, and emergency) as per the contract.
Single ...
1 Opening(s)
6.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 8.00 LPA
Position: Process Engineer
Location: Vapi
Experience: 6 - 8 Years
Industries: Pharma
Responsibilities:
Process Datasheet for Equipment & Instrument (PDS).
Block Flow Diagram (BFD).
Process Flow Diagram (PFD).
Piping & Instrumentation Diagram (P&ID).
Basic Engineering Packages (BEP).
Capital & Operating Expenditure (Capex & Opex).
Heat, Mass & Energy Balance.
Utility Calculations.
Hazard & Operability ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
8.00 LPA TO 10.00 LPA
Key Responsibilities:
1. Project Planning & Coordination:
Scope Definition Support: Assist the Project Manager in defining project scope, objectives, and deliverables in collaboration with user departments (Production, R&D, Maintenance).
Schedule Development: Contribute to the development and tracking of project schedules, identifying critical paths and potential delays.
Resource Allocation Support: Assist in planning and coordinating ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.60 LPA
Position: Sr. Engineer - Maintenance
Location: Silvassa
Experience: 2 - 3
Industries: Steel
Responsibilities:
Plan, schedule, and execute preventive and predictive maintenance for plant machinery and utilities.
Lead troubleshooting and root cause analysis of equipment failures or breakdowns.
Coordinate with production teams to schedule maintenance during planned downtimes.
Monitor equipment ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 4.80 LPA
Position: Maintenance Incharge
Location: Silvassa
Experience: 3 - 5 Years
Industries: Steel
Responsibilities:
Maintenance Planning & Execution:
Develop and implement preventive and predictive maintenance schedules for mechanical, electrical, and utility equipment (e.g., furnaces, rolling mills, cranes, conveyors, pumps, etc.).
Manage day-to-day breakdown maintenance to minimize equipment ...
4 Opening(s)
10.0 Year(s) To 15.0 Year(s)
3.60 LPA TO 4.80 LPA
A Shift Incharge in DRI (Direct Reduced Iron) operations is responsible for overseeing and managing all aspects of plant operations during their designated shift. This includes coordinating with various departments, ensuring efficient production, and maintaining quality and safety standards. They are also involved in troubleshooting operational issues, maintaining logs, and preparing for ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.40 LPA
A Technician in a Power Plant's C&I (Control and Instrumentation) department is responsible for maintaining, troubleshooting, and repairing the plant's control and instrumentation systems. This includes a wide range of tasks, from calibrating and servicing field instruments to diagnosing issues with DCS and PLC systems. They ensure the reliable operation of equipment that monitors and controls the ...