97 Job openings found

Post: QA Engineer In Process/ Inward Education: BE/ Dip (Mech) Experience: 1-4 years            Keywords:  Fabrication department experience candidates should be preferred  Job Profile Conducting Process Audit, Product Audit, Supplier Audit as per plan. Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis. Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies. Monitoring In-Ward & Final Inspection. 1st piece in process inspection report & taking C.A. if any. In handling customer complaints and their solutions. To maintaining quality related document calibration report, Inspection report and etc. To take follow up on supplier corrective action reports. Preparing the control plan of In-Ward, Final& In-Process component. Preparing PPAP, PFMEA for new development components Do SPC to check process capability. Vendor Audit & internal audit and online production inspection. Handling Quality team for in-process inspection. Prepare Monthly data for MRM. ï‚· Involvement in new machine trail & commissioning. Making SIR ...

Post: Production Manager   Education: BE / DME Mechanical Experience: 8 to 15 years in Hot Press forging (Press 1600ton, 2500ton, 1300ton) Salary Up to 6.00 LPA Job Profile :   Good Knowledge of Hot Press forging (Press 1600ton, 2500ton, 1300ton) Monthly and Daily production planning as per given schedule by the marketing department. Managing the Production / Manufacturing / ...

Post : QA Engineer In Process - 04 QA Engineer Inward - 03 Education: BE/ Dip (Mech) Experience: 2-4 years            Keywords:  Fabrication / Weld Shop department experience candidates should be preferred  Job Profile QA Engineer Inward Conducting Process Audit, Product Audit, Supplier Audit as per plan. Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis. Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies. Monitoring In-Ward & Final Inspection. 1st piece in process inspection report & taking C.A. if any. In handling customer complaints and their solutions. To maintaining quality related document calibration report, Inspection report and etc. To take follow up on supplier corrective action reports. Preparing the control plan of In-Ward, Final& In-Process component. Preparing PPAP, PFMEA for new development components   QA Engineer In Process   Monitoring of special processes (Welding). Monitor & Handle Customer feedbacks & complaints. Handle all type of gauges and ...

Job Title :Project Engineer Division/ Functions :  RFQ Cell Dept Direct reporting To :  DGM Qualification : B.E (Mechanical) / DME / ITI Experience:  3-5 Years Key Responsibilities        Technical Feasibility Documentation     1. Part manufacturing feasibility, machining feasibility, forging manufacturing feasibility, quantum raw materials required. Defining packaging standards, DPAR- design product availability review. New Product Production Supervision 1. Supervising the production ...

Designation:      Senior Engineer (Male or Female)            Education:          BE/DME Experience   :     7-8 years                              Job Skill required:                           1              Person should be aware & practice IATF 16949 / TPM, QMS System.                        2              Well Knowledge about PPAP & DR Documentation.                         3              Should be aware about PFMEA, FMEA, QA & QM Matrix, and Control Plan.                          4              Best analytical ability                      5              Very ...

WorksAsInward Quality Engineer & MonitoringChild Part Quality.     ConductingAuditsAt Supplier Endsi e.Projection WeldingAudits,MIGWelding& Head     PipeMfgAudits,System Audits.       AdherenceTo InwardsGaugesCalibration Plan & CorrectingIf NCObserved ,     Maintaining Supplier PPM Records& CommunicatingWith Concern Also Preparing Vendor     Meet Presentation     MonitoringRaw Material TestingPlan (Monthly) & CommunicatingTo Concern If NC’s     Observed Also Sending Special Raw Material For TestingAt CustomersEnd (BAL).     MonitoringAnd SolvingQuality Related ...

Good Knowledge of CNC Programming / Operating  Good Knowledge of Jig Fixture Operation of all Conventional, NC, and CNC machines in tool room. Tool Jigs & Fixture, etc. Manufacturing processes & process planning. CNC programming of HAAS, SIEMENS & FANUC controls. Hands on experience of CNC Prog. & machining (HAAS, FANUC, SIEMENS, ROBOFILL, ELECTRONICA, CHARMILLS TECH., AGIE-CHARMILLS SRP EDM  CONTROLLS). Process sides maintain all parameters on daily basis, implementation of GAUGE R&R system, PDCA & FMEA activity. Implementation of KAIZEN. Total manufacturing process i.e. CAM software, CNC operation, imaging, plating etching, masking, HAL or solder process, BBT and FQC. Conduct trials for new supplier /new Machines and process validationof this product /Machine. Check and maintain all documentation on daily basis. Daily rejection, rework analysis and production analysis by maintaining records of production, rework, rejection, downtime and absenteeism, prepare shift production summary.   Job Location: Waluj MIDC, Aurangabad for More details call on 7249840333

Qualification: Diploma / BE in Mechanical, production or Automobile with 4 to 8 yrs experience in Quality department for metallurgical testing, metal powder pressed parts. Job profile: 1. Responsible for inspection. should involve in in-process, inward and pre-dispatch inspection activities.2. should have PPAP documentation knowledge. 3. exp. in handling customer complaints, prepare CAPA, ...

Qualification: Diploma or BE in Mechanical or Production with 5 to 12 yrs experience in Metal Powder Pressing. Job profile: Responsibility of Machine Shop & Press Shop of Metalic powder pressing.Responsible to lead, motivate people for better output.Good knowledge of TPM.AM, PM etcResponsibility of production set up for new product introduction.Responsibility of ...

The Quality Engineer is responsible for ensuring that products and processes meet established quality standards by identifying quality gaps, conducting root cause analysis, and implementing corrective and preventive actions (CAPA). The role involves continuous improvement, inspection processes, documentation, and ensuring compliance with industry and customer standards (e.g., ISO, IATF). 🧪 Key ...