2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.80 LPA TO 3.00 LPA
Hiring for Cutting Tools Manufacturing Industry
Position: Production Supervisor 02 (M)
Experience: - Min 3+ year in Production Surface Grinding
Qualification: - Diploma
Salary: - 23,000/- to 25,000/-
Job Profile:
CNC, VMC Setting & Programming
Proper Programmer as per drawing
New fixture develop as per requirements
Rejection control and Problem-solving
Provided monthly and daily production plan as per the dispatch schedule
Preparation ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.20 LPA TO 4.80 LPA
Tool Process Engineering
Production Engineer
Monitoring and controlling ongoing production and shop floor activities to achieve organization targets.
Controlling and recording of documents of production department.
Responsible for achieving Daily Production Targets by utilizing manpower and machineries in the best affective manner.
Responsible for new product trail.
Manpower handling on shop floor.
Involved in monthly, weekly and ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.64 LPA TO 3.00 LPA
Handling breakdown maintenance of Moluds
Coordinate with production department for Preventive Maintenance
Set up and operate machine tools
Fit & assemble parts to make & repair dies.
Cavity Polishing.
Sheet matel die tool room & new sheet metal die manufacturing .
Die loding and unloding craine opreting .
All die drilling work and drill radial machine operating.
Job ...
1 Opening(s)
6.0 Year(s) To 8.0 Year(s)
8.50 LPA TO 10.00 LPA
Should be able to maintain CNC machines of machine shop like: Conventional machines, CNC milling, EDM and wire EDM.
Planning of maintenance i e. Preventive / Periodic / Predictive Maintenance with the co ordination of production schedule.
Planning of spare parts, but controlling store inventory
Maintenance of MCs like CNC M/C, SPM & ...
4 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Hiring for the post of Production Shift Supervisor
Experience: Min 3 Years in CNC Machines Shop
Education: BE Mechanical
JOB PROFILE:-
Daily work management (D.W.M.)and shift handling
Production planning and problem-solving
Rework, Rejection, and line through back monitoring.
Continuous improvement in the process to improve the quality point.
Wey Gauges periodic status monitoring on a monthly bases.
Cost-saving ideas for the improvement of the department.
Looking at the quality-related PM charts.
Ensure 1S-2S on the shop floor.
Daily KAIZEN for improving the process.
KEY SKILL:-
Knowledge about CNC Programming & Supervision.
Knowledge of operating and setting of SPC PM Chart.
Knowledge of RADIAL DRILL & another manual machine.
Knowledge of fixture setting.
Knowledge of MAPAL TOOL & TOOLING Setting.
Knowledge of Special Activities of rework of Crankshaft.
Job Location: Supa MIDC, Ahmednagar
if you are interested kindly send your updated CV on career@paradiseplacement.co.in
for more details call on 9765567505
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
1.80 LPA TO 2.00 LPA
Urgent requirement for assistant manager for reputed company at tanmar location accommodation facility
Responsible for procuring samples of products on production line. Takes samples and sends to lab for analysis. Interprets results and may recommend actions if sample shows flaws.
Weighs material, using balance scale, and dumps sample into grinding machine to ...
7 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.44 LPA TO 1.50 LPA
Urgent Requirement for 8th pass 1 to 2 year experience for PREPARATION SAMPLER CHP(O)/PREPARATION SAMPLER JPL G-TANMARwith with accommodation
Responsible for procuring samples of products on production line. Takes samples and sends to lab for analysis. Interprets results and may recommend actions if sample shows flaws.
Weighs material, using balance scale, and ...
17 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.44 LPA TO 1.80 LPA
Urgent Requirement for SURVEYOR-CHP(O)/CHP(O) Prep/JPL G/Lab Prep/Yard-TANMAR (CHHATTISGARH)
Responsible for procuring samples of products on production line. Takes samples and sends to lab for analysis. Interprets results and may recommend actions if sample shows flaws.
Weighs material, using balance scale, and dumps sample into grinding machine to grind and blend sample or ...
18 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.44 LPA TO 1.80 LPA
Urgent Requirement for SAMPLING -BC 4 A-B/SAMPLING-Auger Operator/SAMPLING Bunker/ SAMPLING Preparation for reputed company at KAWAI RAJASTHAN LOCATION
Responsible for procuring samples of products on production line. Takes samples and sends to lab for analysis. Interprets results and may recommend actions if sample shows flaws.
Weighs material, using balance scale, and dumps sample ...
39 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.20 LPA TO 1.88 LPA
Urgent Requirement for SAMPLING-AUGAR OPERATOR/AUGUR SUPPORT/BUNKER/PREPARATION at TIRORA (MAHARASHTRA) location.
Responsible for procuring samples of products on production line. Takes samples and sends to lab for analysis. Interprets results and may recommend actions if sample shows flaws.
Weighs material, using balance scale, and dumps sample into grinding machine to grind and blend ...