1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
4.00 LPA TO 4.50 LPA
Position: Back Office Assistant
Location: Vapi
Experience: 4- 6 Years
Industries: Engineering
Responsibilities:
Manage and prioritize the MD’s calendar, appointments, and travel arrangements
Prepare meeting agendas, minutes, and follow-up action trackers
Draft, review, and manage confidential correspondence and reports
Coordinate internal and external meetings, investor calls, and board interactions
Handle ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Position: QC Engineer - NDT
Location: Vapi
Experience: 2 - 3 Years
Industries: Engineering
Responsibilities:
Conduct inspections and tests on raw materials, in-process production, and final products.
Develop and implement quality control procedures and standards.
Analyze data and prepare detailed reports on test results.
Identify defects and ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Position: QC Engineer
Location: Vapi
Experience: 2 - 3 Years
Industries: Engineering
Responsibilities:
Conduct inspections and tests on raw materials, in-process production, and final products.
Develop and implement quality control procedures and standards.
Analyze data and prepare detailed reports on test results.
Identify defects and recommend corrective ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Position: Production & Planning Engineer
Location: Vapi
Experience: 2 - 3 years
Industries: Engineering
Responsibilities:
Preparation of Production planning and monitoring on daily bases.
Raw material planning and followup with suppliers.
Should have experience of Production Supervision.
Good leadership & work handling ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
5.00 LPA TO 6.00 LPA
Position: Packaging Development Executive
Location: Bhilad Near by Vapi
Experience: 4 - 5 Years
Industries: Cosmetic
Responsibilities:
Hands-on experience in packaging materials testing against set standards .
Hands-on experience in packaging development trials and macheanibility checks.
Maintaining comprehensive records of packaging quality tests, inspections, and other related activities.
Required Skills
Must be ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
4.00 LPA TO 5.00 LPA
Position: Utility Cum Fitter
Location: Bhilad - Vapi
Experience: 2 - 3 Years
Industries: Cosmetic
Responsibilities:
Responsible for the maintenance and repair of utility equipment such as compressors, boilers, chillers, and HVAC systems.
Perform preventive maintenance to ensure uninterrupted operation of production lines.
Handle installation, alignment, and fitting of ...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
3.00 LPA TO 4.00 LPA
Position: Officer - R&D
Location: Vapi
Experience: 1 - 4 Years
Industries: Pharma
Responsibilities:
Design Route of Synthesis & Planning of Experiment for process development of Active pharmaceutical ingredient.
To develop the manufacturing process of APIs & Intermediates.
Process optimization, process validation, determination of critical parameters.
Synthesis, isolation, and characterization of impurities.
Analysing ...
5 Opening(s)
0 To 1.0 Year(s)
1.92 LPA TO 2.40 LPA
Position: GET/DET - Apprentice
Location: Bhilad Near By Vapi
Experience: Fresher
Industries: Engineer
Responsibilities:
Carry out routine maintenance work.
Preventive Plan Maintenance.
Basic knowledge of Transformer, Air Compressor, Lift & D.G.
Troubleshooting skills & root cause analysis.
Advanced knowledge of mechanical & electrical.
Responsible for installation & Maintenance of ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Key Responsibilities:Quality Assurance & Control: Oversee quality control activities in the Enamelling section for copper and aluminiumwires, strips, and CTC. Ensure compliance with customer specifications, national/international standards(IEC, IS, NEMA, ASTM, etc.), and internal quality norms. Monitor and verify raw material, in-process, and finished goods quality. Conduct coating thickness, adhesion, flexibility, ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
10.00 LPA TO 14.00 LPA
Execute process engineering deliverables during project execution phase.
Support in commissioning & start-up activities of new plants and modifications.
Coordinate with process design team, project team, and site execution team to ensure smooth implementation.
Review and validate PFDs, P&IDs, equipment datasheets, and process calculations during execution stage.
Supervise installation and commissioning of process equipment ...