1 Opening(s)
10.0 Year(s) To 20.0 Year(s)
10.00 LPA TO 12.00 LPA
Qualification: BE / Diploma Mechanical or ProductionExperience: min 10 to 20 Years of CNC/VMC, Machining parts development (from Foundry / Engineering / Auto Industries)Department: Machine ShopLocation: Bhosari in PuneJoining Should: As soon as possiblePreferred candidate profile: Machining, development, Design & development, Vendor development, Engineering management, Development management. Process engineering,
Role & ...
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
Qualification: BE / Diploma Mechanical or ProductionExperience: min 3 to 5 Years of CNC Machining parts developmentDepartment: CNC Machine ShopLocation: Pirungut in PuneJoining Should: As soon as possible,
Role & responsibilities:Skill in Machine selection, CNC VMC Programming experience, CNC Machines setting. Cycle time study & cost reduction ideas.Knowledge of various cutting ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.24 LPA
JD for VMC Jr. Programmer
Designation : VMC Jr. Programmer
Qualifications : Diploma Mechanical+ CNC/VMC Program.
Experience : 2 To 5 Years
REQUIREMENT FOR JR.PROGRAMMER
FIXTURE DESIGNING FOR DIFFERENT JOB
DRAWING READING
MACHINE SELECTION FOR AS PER DRAWING
HOW MUCH SETUP REQUIRED AS PER DRAWING
SYMBOLS AND GAUGE IN DRAWING
TOOLING KNOWLEDGE AND ITS PARAMETER
CORRECT WORK OFFSET USE IN MACHINE
CAD / CAM ...
1 Opening(s)
20.0 Year(s) To 25.0 Year(s)
25.00 LPA TO 40.00 LPA
? Responsibility for Technical Operation, Production, planning, vendordevelopment with follow up, Costing, projects management, quality,installation and expansion of operations.? Responsible for achievement of Production planning and accountableto ensure optimal utilization of all resources including manpower,machinery and raw materials.? Identifying potential bottlenecks and deviations, implementationcorrective action to ensure that production targets ...
4 Opening(s)
15.0 Year(s) To 25.0 Year(s)
22.00 LPA TO 30.00 LPA
Responsibility for Technical Operation, Production, planning, vendor development with follow up, R&D, Costing, projects management, quality, design, installation and expansion of operation.• Responsible for Consistent managing for achievement of Production planning and accountable for ensure optimal utilization of all resources including manpower, machinery and raw materials.• Identifying potential bottlenecks and ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
5.00 LPA TO 7.00 LPA
New Product co-ordination with customer for technical side till PPAP approval.
New Product – Study & Clarification prepared
Member in MDT and Organized (NPD-Manufacturing)
To Prepare Process Design (Process Flow , Machine selection & Supplier Selection
APQP Timeline Chart Preparation and follow up till Handover to Mass – Production
APQP Documents Preparation and Handover to ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Job description
Responsibilities
Designing Jig/fixtures/Tools gauges as per process requirements
Machine selection, trial and installation
Process validation
Fixture calibration maintaining critical spare parts for Jigs/Fixtures/Toolings
Understanding of engineering drgs for Stamping, Injection Moulding and Welded parts
Root cause analysis and preventive action implementation
Cycle time calculation, monitoring and improvement.
Preparing Shop floor and Machine layouts
Preparing PFDs, PFMEAs, Control plans, ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
17.05.24
HPS/2024/301
CNC Operator
Male
1
1 to 2
ITI Fitter
The candidate should be ITI / Diploma (Mechanical) with minimum 2 years of experience in operation / programming of CNC Machines (CNC Vertical Turning Lathe, HMC, VMC & Turning Centre) on FANUC & SINUMERIK Control.
Knowledge of operating / programming of CNC machines on Fanuc control (Turning Centre & ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
3.00 LPA TO 5.00 LPA
The company specializes in the geosynthetics industry. Geosynthetics are synthetic products used in civil engineering applications for various purposes such as reinforcement, drainage, filtration, separation, and erosion control.Here's what the company does:1. Manufacturing: The company manufactures geosynthetic products which may include geotextiles, geomembranes, geogrids, geocells, and other specialized materials used ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
For over five decades, the company has consistently met the stringent requirements of major OEMs both domestically and internationally. Their relentless commitment to excellence and the timely adoption of cutting-edge technologies have earned them the reputation of being a preferred vendor in the industry. Renowned for their competitiveness in Cost, ...