1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
3.00 LPA TO 4.00 LPA
We are hiring a Plastic Mould Design Engineer in Ahmedabad.
Job Description: Plastic Mould Design Engineer
Position: Plastic Mould Design EngineerSalary: Up to 35kLocation: Vatva, Ahmedabad
Company Overview:We are a leading company in Ahmedabad, specializing in high-quality plastic mould designs and manufacturing for engineering components. We are expanding our team and looking for a ...
1 Opening(s)
9.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 7.00 LPA
Job PurposeThe main purpose is to design, develop and implements optimal, cost-effectivemanufacturing of moulds along with post moulding operations, in accordance with product specifications and quality standards.
Responsibility: Responsible for all new products and moulds from scratch to final production start up. Responsible for Techno commercial activities. Doing market survey, product cost ...
1 Opening(s)
6.0 Year(s) To 7.0 Year(s)
4.00 LPA TO 5.00 LPA
Main Purpose of the Job:Overall assembly responsibility of the assembly area in the mold shop IM Hyderabad.Main Responsibilities: Performing all the mold assembly. Mould Trouble shooting during / After/During assembly. Preparing the Mould Trial Reports. Addressing & Co-Ordinating the ECN along with the Design & manufacturing. Tracking all the deviations ...
3 Opening(s)
2.0 Year(s) To 4.0 Year(s)
3.00 LPA TO 4.50 LPA
Proficient in Preventive Maintenance of tooling.
Better understanding of Mould Maintenance
Responsible for produce Proto parts & Jig, fixtures, gauges and other tooling’s trial before production.
Proficient in project planning, resource utilization & manpower management
Assessed existing product manufacturing processes to make sure they are operating effectively and efficiently
Developed and tested mechanical components, equipment ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.56 LPA TO 1.80 LPA
Job description
HPS/2023/639
Mould Fitter
Male
1
1 to 3
ITI Mould Fitter
ALL ITI Fitter Electrician /welder /mechanical /electronic / Machinist/ Computer/ Mechanic Diesel
Salary: 18000 to 20000 Thousand
Production, Quality, Maintenance
location - Dadra & Nagar Haveli
Salary Depend on the interview
Role Fitter / Turner
Industry Type Auto Components
Functional Area Production, Manufacturing & Engineering
Employment Type Full Time, Permanent
Role Category Operations, Maintenance & Support
1 Opening(s)
7.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 7.00 LPA
Responsiliable for Preventive and Breakdown Maintenance of Around 380 No. In House & Vendor End Running Moulds as per Process & Sap System Requirement.
Good knowledge of injection mould maintenance, hot runner, cold runner preventive maintenance and blue matching
Good knowledge of polishing in mirror surface with dent remove in reduce time.
Good ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.50 LPA TO 3.00 LPA
Responsible for Preventive Maintenance-Mould & Check Sheet.
Responsible for Mould Break Down & Material Required This Monthly Sheet.
Plastic Injection Molding Machining.
To maintain the 5S Activities in our specified area for Housekeeping.
To do Kaizen monthly basis..
Machine handle
Lath machine
Milling machine
M1TR machine
Grinder surface and cylendrical
Surface Grinder Machine operator Manual Milling Machine operator Manual
Leath Machine ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 4.00 LPA
Interest to learn and work on critical Moulds.
• Review the all new Mould so that we know about the Mould like it’s easy to assembly process, Aesthetic look , Blue matching & check the movement of Lifter ,Sliders. Cooling channels of Moulds to cool properly & also check the ,shrinkage ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 10.00 LPA
Job description
Roles and Responsibilities
We are looking for Tool Room Engineer for our thin wall Plastic Containers Moulds Maintenance
1) Preventive Maintenance of all the Moulds.
2) Handling breakdown maintenance of moulds .
3) Coordinate with production department for Mould Issues Coordinate with mould manufacturer and tool room Manager for providing solutions to mould related issues.
4) Monitor ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
4.80 LPA TO 5.20 LPA
Responsible for New Mould Development.? Mould maintenance & rectification.? Assembly, testing & trial of moulds.? Trouble shooting & incorporation of feedback results on tool’s application.? Process, Planning & Control of tooling.? Quality control & standardization of tooling components.? Metal injection molding. Trouble shooting in various moulds
Plastics Injection MouldMaintenance
Plastics Moulding Process ...