1 Opening(s)
6.0 Year(s) To 12.0 Year(s)
15.00 LPA TO 16.00 LPA
Deputy Manager Manufacturing Engineer - Tubes & Ducts
Job Description Summary
Be the focal between Customer, Supply Chain, Operations to execute NPI’ qualification, production readiness, delivery. Ensure Ontime Qualification and Delivery of New Products.Drive implementation of procedures, new systems & tools in NPI function thru the APQP.Perform Project Management for NPI FAI execution ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
7.20 LPA TO 8.40 LPA
A) Responsibility1) Incoming Raw Material,Incoming Components,Vendor supplied machined parts and Heat-Treated parts,Establishing required quality at vendors’ works.2) In-house –machined componentsHeat Treated componentsWelded sub assembliesFinal Assembly of the productsTesting of Finished GoodsPackaging3) Should be able to manage the team of 5 engineers, which includes, assigning jobresponsibilities – work station- wise and ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.50 LPA TO 6.00 LPA
Hiring for the post of Senior Engineer / Assistant Manager Production
Experience: Min 5 Years in Grinding, CNC VMC Machines Shop
JOB PROFILE:-
Daily work management (D.W.M.)and shift handling
Production planning and problem-solving
Rework, Rejection, and line through back monitoring.
Continuous improvement in the process to improve the quality point.
Wey Gauges periodic status monitoring in monthly bases.
Cost saving ideas for the improvement of the department.
Looking at the quality-related PM charts.
Ensure 1S-2S on the shop floor.
Daily KAIZEN for improving the process.
KEY SKILL:-
Knowledge about CNC, VMC, HMC Programming & Supervision.
Knowledge of operating and setting of SPC PM Chart.
Knowledge of RADIAL DRILL & another manual machine.
knowledge of Grinding Machine.
Knowledge of fixture setting.
Knowledge of MAPAL TOOL & TOOLING Setting.
Knowledge of Special Activities of rework of Crankshaft.
MPI Level 1 training
Knowledge of TOYODA pin grinding machine.
Knowledge of ADCA.
Job Location: Shendra MIDC, Aurangabad
for more details call on 9765567509 / 7249840222
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Interview Date: 04/01/2019
Post: Maintenance Engineer 2 Nos.
Education: DME / DEE / BE
Experience: Min 3 Years
Interview Date: - 24 to 29 Nov. 2018
Job Responsibility:
Responsible for corrective, preventive & predictive maintenance of machines as per PM plan.
Responsible for attending any type of break down.
Responsible for operation & maintenance of all Facility & utility.
Safety assurance & changes in the electrical circuit to improve productivity.
Responsible for Internal & External Audits.
Machines handled- Hydraulic & Pneumatic Press Machine (50 to 500 Tons), High Speed Press (200 to 350 tons), High-Speed Notching machine,Shotblasting, Clating machine, Die Casting, Slating Machine CNC,MPI Machine, Grader machine, Milling Machine, VMC Machine, stapping Machine, Leth Machine, Harding Tempering, Electrical Furnace, Oil Furnace, Welding Machine (Spot & CO2), Tig Welding,And all electrical work etc.
Responsible for achieving the common goals of the department.
•Handle all daily basis problems related to Electrical.
•Daily check & update electrical energy consumption as per sheet.
•Preventive maintenance as per schedule.
•Training is given to new joining operators related to Electrical system of M/C.
•Focus on safety-related Keizens.
Job Location: Waluj MIDC, Aurangabad
Bus & Canteen facility not available
More details call on 9765567509 / 7249840222
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.80 LPA
Post: Heat Treatment Engineer / Assistant Manager
Experience : 3 to 6 Years
Salary: 4 LPA
JOB RESPONSIBILITIES:-
Handling of continues carburizing Furnaces(Made By Dongwo surface Tech Ind).
Handle all Heat Treatment Shop Floor Including Shot Blasting Machine, Shot Peening Machine, Thread Softening Machine, MPI Machine, Straightening Machine.
Checking of samples (Case Depth, core hardness, Micro Structure)
Checking of inward samples (surface hardness, microstructure, grain structure)
Handle Endo Gas Generator
Handling of wet Lab(Cutting, Mounting, Polishing.)
Opearting of Brinell Hardness Tester, Rockwell Hardness Tester, Vickers Hardness Tester, Microscope Millipore Checking, Spectro Test.
Fill up all JH Sheets, DWM data OEE Sheets. Utility Consumption aw Material Inspection for crack, Hardness, Micro-structure, Grain size Measurement, Decarburization level and Inclusion level measurement and defects if any with traceable documents.
Inspection of heat treated parts for surface hardness, Effective case depth, microstructure analysis, decarburization level (if any) and defects if any with traceable documents.
Research & Development work like the selection of an appropriate heat treatment cycle without sacrificing customer requirements.
Monitoring the heat treatment process continuously and taking the remedial action if any deviations are found.
Heat treatment vendor development, Vendor process monitoring, and product inspection.
Maintaining the Metallurgical equipment that is as follows
Metallurgical Microscope ( Leica ) – DM 2800
Micro Vickers Hardness Tester ( Future tech) – FM 300
Vickers hardness tester ( Future tech) – FV 800
Digital Rockwell Hardness Tester ( Future tech) – FR – 3e
Analog Rockwell Hardness Tester.
Abrasive cutting machine ( Chennai metco )
Molding machine ( Chennai Metco )
Double Disc Polishing Machine ( Chennai Metco )
Belt grinding machine ( Chennai Metco)
Brinell Hardness Tester
Muffle Furnace (Techno).
Carrying out of furnace and process validation with proper traceable documents and calibrating the metallurgical instruments with appropriate service parties as per schedule.
Job Location: Chikalthana MIDC, Aurangabad
Send CV on Career@paradiseplacement.co.in
for more details call on 7249840333