3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
personnel shall have been tested and certified by ASNT in the required NDT method (VT, PT, MT-RT, UT) and shall be required to fulfillthe full scope of a practicing Level III including, but not limited to:
method application, interpretation of results,
interpretation of codes and standards, preparation of procedures,
Training of Level I ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
9.00 LPA TO 12.00 LPA
Degree in Mechanical Engineering / Metallurgy with minimum 15 years of experience in Welding / NDT (Non? Destructive Testing) plus Level?II in RT (Radiographic Testing) or Diploma in Mechanical Engineering / Metallurgy with minimum 20 years’ experience in Welding / NDT plus Level–II in RT
A Lead Welder - Fabricator provides lead ...
2 Opening(s)
7.0 Year(s) To 15.0 Year(s)
1.00 LPA TO 22.00 LPA
Designation: Structural QC Inspector
Job Location: Dammam(Saudi Arabia)
Experience: 7+ Years
Job Description
Job Summary: We are seeking an experienced Structural QC Inspector with Aramco approval to join our team. The ideal candidate will have a minimum of 7 years of relevant experience in structural quality control inspection within the oil and gas industry. The primary responsibility of ...
20 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 9.00 LPA
Candidate is Must [ NDT (Leval 2) ] & have knowledge of RT, PT & MT
Must have knowledge of Basic Fabrications of Tank, Vessels
Can Perform Stage inspection as per drawing
Can prepare reports of inspection
Must understand drawings & can perform stage inspection
Can collect data and prepare report for ASBUILT drawing
Can Handle ...
3 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 5.00 LPA
NDT Certified
Knowledge of WPS, WPQ, PQR
Welding Process (Specially GMAW)
Have a skill to interpret structure drawing /code(IS,ASME,AWS,ASTM etc.,)
Inspect/monitor fit up, weld visual, final dimension inspection, blasting & painting etc
Ability to maintain documentation as per approved specification/quality assurance plan/code.
Structural Fabrication Must- Pre Engineering Building Preferred
All kind of QC Inspection(including Material inspection, fabrication work, ...
6 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Job Description: Quality Control EngineerQualification: BE Mechanical / BE Fabrication / BEMetallurgy/Diploma Mechanical or FabricationExperience: 3-5 years for BE and 5 to 7 years for DiplomaArea of exposure/ competency Supporting to QA / QC In Charge for Quality Management System Handling. Coordinating Third party inspection and its associated activities. Laboratory ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
0.00 LPA TO 20.00 LPA
Designation: Inspector - Welding
Job Location: Jubail, Saudi Arabia
Experience - 5 years
Notice period - Immediate to 30 days
Job Description
Should be well familiar with international codes, Aramco standards, inspection and testing requirement for pre- welding, in processes welding and post welding activities.
Carry out the inspections as per approved ITP liaise with the ...
1 Opening(s)
5.0 Year(s) To 15.0 Year(s)
0.00 LPA TO 0.00 LPA
Welding Inspector
Inspector shall have university degree with minimum 5 years of inspection experience.
Inspector shall be certified as an American Welding Society CWI, CSWIP 3.1 Certified Welding Inspector.
Inspector shall have a demonstrated background and thorough knowledge of codes such as ANSI B 31.3, 31.4 and 31.8, ASME Section V and IX, ...
3 Opening(s)
12.0 Year(s) To 15.0 Year(s)
0.00 LPA TO 30.00 LPA
Position: Corrosion Engineer
Location: Saudi Arabia
Experience requirement: Min. 12 years
Joining Date: Immediate to 30 days
Additional Qualification
? API-580 - Advance Risk Based Inspection Program
Certification No: 65497
? API-510 - Pressure Vessel Inspector Program
Certification No: 44554
? API-570 – Piping Inspector Program
Certification No: 41201
? API-571 – Damage Mechanism Affecting Fixed Equipment
Certification No: 70634
? Certified CSWIP 3.1 Welding Inspector, TWI ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
Minimum 02 Experience in same field NDT level-ii & Autocad
Specially in Storage Tanks, Vessels & Structures in engineering manufacturing industry
Salary No Barred for right candidate (3L - 5L)
We provide guaranteed hike of at least 10-15% of CTC
Minimum 02 Experience in same field NDT level-ii & Autocad
Specially in Storage Tanks, Vessels & Structures ...