2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.80 LPA
Post: Senior Production Supervisor
Education: BE / DME Mechanical
Experience: 2 to 5 years in Hot Press forging (Press 1600ton, 2500ton, 1300ton)
Salary Up to 2.80 LPA
Job Profile & Responsibility:
Supervise and achieving daily production target
Handling skilled & unskilled manpower
Responsible for the material handling
Final inspection of all components.
Organized continual improvement ,TPM,5s,ts 16949
Responsible for day to day ...
3 Opening(s)
2.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.60 LPA
Hiring for Production Engineer in Crank shaft & Knuckles Manufacturers in Aurangabad, Shendra MIDC..
Designation: Production Engineer
Education: DME / BE Mechanical
Must Required experience - Grinding Expert, Handsome experience in turning,
Set Up, Change Over, New Development, Programming, Wheel Change
Independent Production handling, Process knowledge of Cam Milling, Crank shaft, knuckles, and Cam Grinding, Crane, Furnace, ...
2 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.60 LPA TO 3.30 LPA
Hiring for Production Engineer in Crank shaft Manufacturers in Aurangabad , Shendra MIDC..
Designation : Production Engineer
Education : DME / BE Mechanical
Must Required experience - Toyeda Grinding Expert, Handsome experience in turning,
Set Up, Change Over, New Development, Programming, Wheel Change
Independent Production handling, Process knowledge of Cam Milling, Crank shaft and Cam Grinding, ...
12 Opening(s)
0 To 6.0 Year(s)
1.44 LPA TO 2.00 LPA
Experience Required - 5-6 Months ( Minimum)
Fresher's also allow.
Education - Graduation in any discipline (Above 50%) Salary : up to 2.00 LPA
Preferable immediate Joiner
Job discription
Give permanent Fix to the Desktop, Printer problems, basic LAN & server support issues Remote Call Closure within Norms Follow-up the Checklist(s) Load/reload standard build operating ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
10.00 LPA TO 15.00 LPA
Requirement GENERAL MANAGER-MECHANICAL MAINTENANCE SPONGE IRON(350*2TPD 100*2TPD) for new generation integrated steel and power manufacturing based in Raipur (chhattisgarh) & Odisha location India. SID-4 Kilns (2 * 350TPD and 100*2tpd)Power- 80 MW/56 MW. (AFBC & WHRB boiler) Induction furnace 12ton-20 Tone (10 Panel) 25 MWT MT TMT Bar mill Ferro Alloys ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
4.80 LPA TO 5.30 LPA
Urgent requirement for Manager mechanical maintenance sponge iron dri for reputed steel plant at Bilaspur CG location.
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of problems arising during routine maintenance work and implementing
systematic solution.
Preparation of preventive maintenance schedule & checklist.
Planning & controlling of ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.00 LPA
Requirement SHIFT INCHARGE/Sr ENGINEER- MECHANICAL MAINTENANCE SPONGE IRON (350*2TPD , 100*2TPD) for integrated steel and power at Raipur
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of problems arising during routine maintenance work and implementing
systematic solution.
Preparation of preventive maintenance schedule & checklist.
Planning & controlling ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.00 LPA
Requirement ENGINEER- MECHANICAL MAINTENANCE SPONGE IRON at Raipur
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of problems arising during routine maintenance work and implementing
systematic solution.
Preparation of preventive maintenance schedule & checklist.
Planning & controlling of spare part planning for preventive and breakdown maintenance.
Planning and ...
2 Opening(s)
20.0 Year(s) To 25.0 Year(s)
10.00 LPA TO 12.00 LPA
Description:
Require immediately for a leading STEEL INDUSTRIES and a highly reputed Group for General manager MECHANICAL for Operation /Sponge Iron Division 350*4 tpd 100*2 at In charge of Operation Department of SID plant at RAIPUR Location ,
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.20 LPA
Description:
Daily monitoring and control of energy consumption of the entire plant.
To ensure compliance with quality standards and maintain related documents.
To ensure the daily routine documentation and utility operation as well as attend the breakdown.
To ensure the Operation of pre-treatment of the water system.
To ensure the effluent treated plant operation, adherence ...