1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
8.00 LPA TO 10.00 LPA
A. Purpose /Role of the joC. Responsibilities/ Accountabilities of the job: Describe the main results expected from the job1. Key Result Areas: Key Result Areas: Incident free operations, Adherence to INEOS Styrolution SHEguidelines, Compliance with local regulations.Major Activities: Participate on regular safety training at site:o Safety rules and guidelineso Operating ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
9.00 LPA TO 12.00 LPA
Description:
Requirement MECHANICAL MAINTENANCE MANAGER - SPONGE IRONSPONGE IRON at Raipur
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of problems arising during routine maintenance work and implementing
systematic solution.
Preparation of preventive maintenance schedule & checklist.
Planning & controlling of spare part planning for preventive and breakdown ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Operation of CHP Equipment:
Operate and control combined cycle gas turbine (CCGT), steam turbines, boilers, heat recovery steam generators (HRSG), and associated auxiliary equipment to generate electricity and thermal energy in accordance with production demands and grid requirements.
Monitor and adjust operating parameters such as fuel flow, steam pressure, turbine speed, and ...
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Responsibilities:
Equipment Operation:
Operate and control power generation equipment, including boilers, steam turbines, generators, pumps, and auxiliary systems, to produce electricity according to demand and grid requirements.
Monitor equipment parameters, such as temperature, pressure, flow rates, and power output, using control systems and instrumentation to ensure efficient operation.
Start-up and Shutdown Procedures:
Execute start-up and ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
A Boiler DCS (Distributed Control System) Operator/Engineer in a power plant is responsible for controlling, monitoring, and optimizing boiler operations from a central control room to ensure safe, efficient steam generation. They operate the DCS interface to manage parameters (pressure, temperature, fuel), handle startup/shutdown, and manage alarms/troubleshooting.
Key Responsibilities:
DCS Operation: Control boilers, burners, ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
0.00 LPA TO 25.00 LPA
For a temporary assignment during TA/Shutdown Project in Saudi Arabia, below are the requirements:
Position: Environmental Engineer
Duration: 2 - 3 months
Location: Saudi Arabia
Immediate joiners preferred.
Minimum 5 years experience in waste water, waste management for Oil & Gas.
Knowledge about emergency response and handling of hazardous waste & chemicals
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
10.00 LPA TO 15.00 LPA
Requirement GENERAL MANAGER-MECHANICAL MAINTENANCE SPONGE IRON(350*2TPD 100*2TPD) for new generation integrated steel and power manufacturing based in Raipur (chhattisgarh) & Odisha location India. SID-4 Kilns (2 * 350TPD and 100*2tpd)Power- 80 MW/56 MW. (AFBC & WHRB boiler) Induction furnace 12ton-20 Tone (10 Panel) 25 MWT MT TMT Bar mill Ferro Alloys ...
4 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
A Boiler DCS Engineer monitors and controls boiler operations through a Distributed Control System (DCS) to ensure safe and efficient steam generation. Key responsibilities include operating the DCS, executing start-up and shutdown procedures, monitoring critical parameters like pressure and temperature, and responding to alarms and abnormal conditions. This role also involves troubleshooting issues, ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
4.80 LPA TO 5.30 LPA
Urgent requirement for Manager mechanical maintenance sponge iron dri for reputed steel plant at Bilaspur CG location.
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of problems arising during routine maintenance work and implementing
systematic solution.
Preparation of preventive maintenance schedule & checklist.
Planning & controlling of ...
10 Opening(s)
10.0 Year(s) To 20.0 Year(s)
10.00 LPA TO 15.00 LPA
Name of Post : DGM / Sr. Manager (Electrical Maintenance Dept.) 2 Job assigned/Job profile : Monitor boiler reliability, pressure parts healthiness, and shutdown overhauling activities. Overall responsible for operation and maintenance activities of the respective department. Ensure safe, reliable, and efficient plant operation in line with ...