1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
2.50 LPA TO 3.00 LPA
Hiring for Tool Room Engineer
Exp: 5-6 yearsResponsibility:
Operating of VMC,CNC,maintain 5S
Supervision and shift handling
Implement 5s and kaizen related activities
Improve cycletime for no.of job in production
working vmc Vertical (G17) and Horizontal
Job Location: Waluj MIDC, Aurangabad
for More details call on 9765567506
Send your CV on career@paradiseplacement.co.in
5 Opening(s)
0 To 0
1.20 LPA TO 1.44 LPA
Hiring for "Machine Operator" in Aurangabad
Interview Date : 02-03 July 2018
Post : Machine Operator
for Male - 05Work Area : Production, CNC,VMC Machine,Machine Shop Operating, Rotational Shifts
Responsibilities:
Programming for CNC machine, VMC & HMC machine
Handling of Drilling & Tooling for CNC/VMC/HMC
Handing the machine setting.
Education: BE Mechanical
Experience: FresherSalary: upto Rs. 12,000/-
Job Location : Waluj MIDC, Aurangabad
For ...
1 Opening(s)
0 To 3.0 Year(s)
1.80 LPA TO 2.60 LPA
Hiring for Production supervisor in MAchine Shop
Designation : Production supervisor
Education : DME / BE Mechanical
Must Required experience -
Component setting & development
Fixture knowledge & tooling knowledge
Drawing knowledge
Doing planning to achieve monthly target given by customers.
Settings on CNC machine, VMC, HMC , Machine.
CNC, VMC, HMC Machine programs.
If there is problem in dimension of Job according to ...
2 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.60 LPA
Post : Automation Engineer
Experience : Min 3 Years
Salary : up to 3.60 Lac(s)
Education : : 4 Years professional course in ELECTRONICS & COMMUNICATION ENGINEERING
Certificate in INDUSTRIAL AUTOMATION containing PLCs, SCADA (PCIM), AC DRIVES, SENSORS, CALIBRATION OF INSTRUMENTS, from QUICK LOGIC CONTROLS,
Post : Skill : Well versed About Machine Shop Automation, PLC control Panel, Control circuit, Power Circuit, AC Drives, Sensors, Limit Switch, Temperature Controllers, Temperature Sensors Motors, Conveyors , Robotic ,TPM, Preventive Maintenance ,Break Down Maintenance ...
45 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Dear Sir,
Urgent Hiring for HMC, VMC, VTL & DMG Machine Operator in Aurangabad for Upcoming plant
Company Profile: Company was founded in 1983 and is India's largest and most reputed manufacturer of Electrical Steel Lamination, Motor Cores, Sub-Assemblies, Die-Cast Rotors and Press Tools. We have already diversified into manufacturing of Castings, Steel ...
1 Opening(s)
0 To 2.0 Year(s)
1.20 LPA TO 1.80 LPA
Job description
We also take fresher , ITI turner/ fitter fresher and also experienced candidate any apply .
1. Lathe operator
2. Polishing department
3. Surface grinding operator
4. Edm sparking operator
5. Cylindrical grinding operator
6. vmc cnc milling operator mitshibushi controller
7. Cnc vmc programmer delcam or camworks
8. cnc lathe programmer cum operator for fanuc controller
9. ...
1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 5.00 LPA
Location : Moashi & Markal
Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc.
Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc.
Translate instructions into computer commands so the machines can perform the correct function
CNC Machine knowledge,
Drawing Reading Knowledge.
General ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Location :- Bhosari
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
4.00 LPA TO 6.50 LPA
Major Break down Extrusion machine analysis & Reduce the Break Down.
Preventive Maintenance schedule according work. & Safety Awareness.
Involved in foundry casting mould alignment work
Result oriented, able to work independently as well as group member
Maintaining E.O.T cranes & compressors
Maintaining and servicing all hydraulic pumps & valves
Maintenace of CNC VMC Machine
press shop ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 4.20 LPA
We Have Requirement of CAD CAM ENGINEER.
B.E / BTech regular degree (No correspondence /part time) in mechanical engineering with min 3 to max 6 years’ experience
In the age group of 26 to 30
Local candidates preferred.
Proficiency in CAM software like NXCAM/GIBBSCAM
Preferably engaged with VMC/CNC milling/CNC wirecut.
Knowledge of any ERP preferred.
Least 3 ~6 ...