16 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
Hiring for upcoming Electronic Product Mfg. Plant in Dhule for Tool Room (Press Tool & Plastic Moulding) Department below post
Post
VMC Operator : 3 Post
Education: ITI / DME
Experience: Minimum 2-year Experience
Salary: Rs. 12,000 to Rs. 14,000/-
VMC Programmer + Operator : 2 Post
Education: ITI / DME
Experience: Minimum 2-year Experience
Salary: Rs. 22,000 to Rs. 25,000/-
Turner: 2 Post
Education: ITI ...
8 Opening(s)
2.0 Year(s) To 10.0 Year(s)
1.80 LPA TO 2.40 LPA
Requirements
ITI/Diploma from reputed organization
2-6 years of Proven experience as welder in welding
Experience using a variety of welding equipment and procedures (MIG & TIG .)
Experience in using electrical or manual tools (saws, squares, calipers etc.)
Ability to read and interpret technical documents and drawings
Knowledge of relative safety standards and willingness to use protective clothing ...
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.60 LPA
Responsibilities – 1) MIG welding on auto parts.
2) TIG welding 2/3 wheelers components.
3) SMAW welding for reworking .
1) Testing and Training to New Joinded Welders
Economieser Coils Welding in TIG (1G Position ) Material P-11 (Allayes Steel)
Super heater Coil Welding with TIG + Arc Welding (1G & 3G Position.)
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.20 LPA TO 1.80 LPA
Job Description
05/08/24
HPS/2024/466
Maintainence Fitter / Wilder
Male
1
1 to 3
ITI Fitter / Welder
Inspecting buildings, equipment, and systems to identify any issues.
Repairing faulty equipment units and damaged structures. Developing and implementing preventative maintenance procedures. Managing heating and plumbing systems to guarantee functionality.
Assembling, installing, and maintaining mechanical systems, machinery, and equipment. Troubleshooting machinery and performing ...
2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.00 LPA TO 3.00 LPA
Installing, maintaining, and repairing electrical control, wiring, and lighting systems. Reading technical diagrams and blueprints. Performing general electrical maintenance. Inspecting transformers, circuit breakers, and other electrical components.o vocational training or successfully completed apprenticeship as an electrician, ITI Certificateo Knowledgeable for AC/DC Devices.o Ability to Understand wiring Diagramo VaccinatedInstalling, maintaining, and ...
1 Opening(s)
0 To 2.0 Year(s)
1.00 LPA TO 3.00 LPA
Installing, maintaining, and repairing electrical control, wiring, and lighting systems. Reading technical diagrams and blueprints. Performing general electrical maintenance. Inspecting transformers, circuit breakers, and other electrical components.o vocational training or successfully completed apprenticeship as an electrician, ITI Certificateo Knowledgeable for AC/DC Devices.o Ability to Understand wiring Diagramo VaccinatedInstalling, maintaining, and ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 3.00 LPA
Candidate should have experience in Fabrication related work with any Industry in Kolkata.
Male considered
Fitter / Welder will be considered
Should have fabrication of pole, towers related work.
Job location Taratala, Kolkata
Candidate should have experience in Fabrication related work with any Industry in Kolkata.
Male considered
Fitter / Welder will be considered
Should have fabrication of pole, ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
Qualification: Diploma / BE in Mechanical or Production Experience: 2 to 5 yrs in quality inspection of Fabrication equipment & its parts, structural fabrication work.Work location: Rajapur, Pune (on Satara road)Gender: MaleSalary: Based on candidate’s knowledge & interview ranging between 20k – 25k CTC per month. Benefits: PF, ESIC, Annual Bonus, Performance Based Increments ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Maintenance Shift In charge
Education: DEE / BE Electrical
Experience: Min 6 Years in Rolling Mill / Steel Industry
Job Profile: Working in a general shift, make daily job planning, manpower planning as per rolling section.
Responsible for doing pm-1(preventive maintenance) jobs .shift schedule and daily checklist follow-up,
Responsible for Electrical & Automation Maintenance of 600-meter long HAPL Line consist of Entry section, RCM Welder,6-HI Cold / Hot Rolling Mill, Furnace, Scale Breaker, Shot- Blaster, Pickling, Entry-Mill & Exit Loppers & exit Section.
Responsible for handling all maintenance related activities of ABB PLC's,AC Drives,AC Motors and DCS 800xA System and LT and HT switch Gears used in the plant
Knowledge in logic solving in control panels & various interlocking schemes required for automation and analyzing all drawings related to automation & control systems.
Instrumental in coordinating with various internal departments and contractor personnel for safe execution of shutdowns and ensuring implementation of routine/preventive/breakdown maintenance schedules of the system to increase machine uptime, equipment reliability thereby.
Responsible for maintaining 5S activity & safety measures regularly
To co-ordinate with the Electrical contractor for Execution, Erection, and Commissioning
Basic Knowledge of Sheet CENTER GUIDE and STEERING UNIT, EDGE System provided by EMG.
Knowledge of hardware Communication between Drives, PLC and HMI’s through Fiber Optic and Profibus.
Knowledge of Gauge Measurement system provided by IMS used at 6 HI in Line Mill.
Responsible for keeping a record of the daily power consumption, daily delay report, spare parts list of the plant.
Basic Knowledge about Control-Logix / Compact-Logix systems of Allen-Bradley PLC (Rockwell Automation).
Identifying NetLinx networks for use in a Logix5000 System used for in-line Welder.
Successfully accomplished Erection, testing, Commissioning of ARP System(Acid Recovery Process
To maintain records, logbook for the job carried out.
Organize safety meetings & give on the Job training to my subordinates
To ensure good housekeeping in the area and the shop floor.
Take participate in IMS internal audit and prepare all supporting document
To maintain a record of bypass of trip & interlock as per the procedures.
Working on SAP (Plant Maintenance Module).
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
For more details call on 7249840333 / 9765567506
Send CV on career@paradiseplacement.co.in
3 Opening(s)
1.0 Year(s) To 7.0 Year(s)
1.44 LPA TO 1.80 LPA
Job Description:
Responsibilities
1) MIG welding on auto parts.
2) TIG welding 2/3 wheelers components.
3) Ark Welding
3) SMAW welding for reworking
1) Testing and Training to New Joinded Welders
Economieser Coils Welding in TIG
Super heater Coil Welding with TIG + Arc Welding
Job Location : Shendra MIDC , Aurangabad
for more details call on 9765567699