1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.44 LPA TO 1.80 LPA
Post: Electrical Maintenance Engineer
Education: DEE
Experience: Min 6 Month
Salary up to 1.80 LPA
New Machine commissioning & installation.
Maintenance for CNC turning machine,
Preventive maintenance planning, scheduling, the executive for all machines.
Maintain spares required for machines and utility equipment
Electrical equipment knowledge - VCB. ACB. Capacitor connection. generator. Mccb. Mcb. Mpcb. Contactor. Relay. Plc. All types of switching devices. Panel wiring connection. Proximity sensor(inductive/capacitive). Induction motor. Transformers. & other equipment etc.
Carrying predictive maintenance activity.
Maintain the record of daily energy consumption and maintain the data of daily water ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
Post :
Mechanical Maintenance Engineer - 03
Electrical Maintenance Engineer - 03
Education: BE/ Dip (Mech & Electrical)
Experience: 2-4 years
Keywords: Fabrication / Weld Shop department experience candidates should be preferred
Experience in teaching & programming an ABB, Panasonic robot.
Trouble-shooting & modification of Allen-Bradley Control Logix PLC programs, Mitsubishi PLC program.
Good knowledge of Allen- Bradley PLC5, SLC.
Working on ...
1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 7.00 LPA
Designation: Senior Engineer (Male or Female)
Education: BE/DME
Experience : 7-8 years
Job Skill required:
1 Person should be aware & practice IATF 16949 / TPM, QMS System.
2 Well Knowledge about PPAP & DR Documentation.
3 Should be aware about PFMEA, FMEA, QA & QM Matrix, and Control Plan.
4 Best analytical ability
5 Very ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.50 LPA TO 4.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 4.00 LPA
Experience of teaching & programming an ABB, Panasonic robot.
Trouble-shooting & modification of Allen-Bradley Control Logix PLC programs, Mitsubishi PLC program.
Good knowledge of Allen- Bradley PLC5, SLC.
Working on servo motor and it's drive (Mitsubishi servo system).
Modification in electrical panel and PLC programs for eliminate the breakdown.
Looking over all the maintenance robots, ...
1 Opening(s)
7.0 Year(s) To 15.0 Year(s)
4.00 LPA TO 6.00 LPA
Role & Responsibility:-
Preventive & Breakdown Maintenance of PLC controlled SPM machine, Grinding Machines, Screw press, Plating and hardening, tempering ,Nitriding furnaces.machine shop, SMTL Centre less grinding, CNC VMC Lathe Turning/facing, Groove grinding, Wet End, Straightening machines. Tool room tool holder
Coordinating the maintenance team for troubleshooting and maintenance of Plant equipments, ensuring least possible downtime for production
Planning & executing Planned/Preventive Maintenance activities to improve the machine functionality and prevent machine failure.
Planning and implementing maintenance schedules of plant machinery to increase machine up time and equipment reliability.
Performing WHY-WHY analysis to get the root cause of failure and implement counter measures to avoid future occurrence.
Erection and commissioning of new machinery and providing detailed training to the operators
Participating in Process Improvement activities for hazard free operations
Executing Kaizen, Poke-Yoke and Continuous Improvement activities
Spares management to optimize the availability of spares
Supporting the TPM Pillar activities like Planned Maintenance, Focused Improvements & Education and Training
Operation & maintenance of air compressors, Chiller pumps DG Set & other utility equipment,
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
800000.00 LPA TO 1200000.00 LPA
Job Profile :
Should Have Knowledge About Utility Maintenance .
Should Have Knowledge about planning & monitoring Budget & Costing .
Should have handle tracking daily .
4 Breakdown analysis-MTTR/MTBF, WHY- WHY analysis, 8 D reports. Breakdowns,
Implementing preventive maintenance programs to improve the efficiency of the system or the equipment.
Monitoring Energy consumption PNG & ...
1 Opening(s)
8.0 Year(s) To 12.0 Year(s)
8.40 LPA TO 9.60 LPA
Full Job Description
We therefore endeavour to promote a lifestyle that meets your individual needs while also enabling you to be fully engaged at work.
Your responsibilities
Responsible for to do all activity related to production turning division.
Training to shop floor employees to make them skilled.
To allocate job to subordinator according to qualification ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 5.00 LPA
Installation, Testing, Commissioning, Maintenance & Troubleshooting-
Preventive, Predictive, Target Base and Break down Maintenance planning and activities.
Responsible for Power Saving Jobs, Projects, Modification Works.
Adhere to POKA-YOKE, 5S, documentation.
Carrying out Why-Why/Root-Cause/Break Down analysis.
Attending breakdown related machine in high voltage & low voltage power cable industry such as VCV line, RBD, 91 Bobbin ...