1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 4.00 LPA
WorksAsInward Quality Engineer & MonitoringChild Part Quality.
ConductingAuditsAt Supplier Endsi e.Projection WeldingAudits,MIGWelding& Head
PipeMfgAudits,System Audits.
AdherenceTo InwardsGaugesCalibration Plan & CorrectingIf NCObserved ,
Maintaining Supplier PPM Records& CommunicatingWith Concern Also Preparing Vendor
Meet Presentation
MonitoringRaw Material TestingPlan (Monthly) & CommunicatingTo Concern If NC’s
Observed Also Sending Special Raw Material For TestingAt CustomersEnd (BAL).
MonitoringAnd SolvingQuality Related ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.44 LPA TO 2.20 LPA
Accountabilities:
Proven expertise in new component-process development or Process Design, Planning and manufacturing.
Project handling skills, with thorough knowledge of preparation of process sheet for new product development.
Production planning and execution for the development of New products.
Machining Process- Turning, Gear Hobbing, Gear Shaving, Gear Shaping, OD/IDGrinding,Gear Grinding, Honing, & broaching.
Heat-treatment process- Harden-temper ...
2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Documentation of Manufacturing audit & System Audit
Inward Inspection Of raw material and records concern with it
Assuring quality by monitoring In process & Final inspectors.
Attain Customer Complaints.
Follow standard operating procedure, manual & work instruction for production operation for the unit.
Carried out the process of internal auditing, monitoring.
Reduce the rejection level & ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.44 LPA TO 1.80 LPA
Responsible for all the Quality issues of all the products
To ensure zero % rejection at the customer's end
Responsible for the Developments of new techniques and methods of Q A
Responsible for the gauge calibration
Responsible for the development of a good Quality team in all area
Responsible for the reduction of in-process rejection
Responsible ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.00 LPA
1 Responsible for all the Quality issues of all the products 1.To ensure zero % rejection at the customer's end 2.Responsible for the Developments of new techniques and methods of Q A 3.Responsible for the gauge calibration 4.Responsible for the development of a good Quality team in all area 5.Responsible ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
7.00 LPA TO 8.00 LPA
Monitoring & Co-ordination with Planning, Quality Assurance and Dispatch department to confirm the delivery of targets as per schedule
Meeting the delivery commitments / schedules of internal and external customers
Implementation of an effective production plan
Ensuring quality requirements are met at all stages of manufacturing.
Reviewing the production requirements and systems constantly to ...
4 Opening(s)
2.0 Year(s) To 5.0 Year(s)
Not Mentioned TO 3.50 LPA
Job Description
Experience
Complete understanding of overall operational activities including phone, email, chat, community and social media support
· Must have a good working knowledge of Excel and other Windows based programs (Word, PowerPoint, etc.), and have the ability to organize/analyze data in a structured manner.
Capacity Planning experience is preferred.
· Minimum of one ...
1 Opening(s)
9.0 Year(s) To 18.0 Year(s)
9.00 LPA TO 10.00 LPA
We are Hiring for Manager Quality in Aurangabad for foundry division
Post : QA Manager
Job Location : WalujEducational Qualifications: Bachelor of Engineering in the stream of Mechanical / Production. Or Diploma in Engineering in the stream of MechanicalDesired Experience: Min 9+ years experience in a Manufacturing company preferably in an foundry industry. Salary : up to 10 Lac(s)If ...
2 Opening(s)
4.0 Year(s) To 8.0 Year(s)
4.00 LPA TO 5.00 LPA
Qualification: Diploma / BE in Mechanical, production or Automobile with 4 to 8 yrs experience in Quality department for metallurgical testing, metal powder pressed parts.
Job profile:
1. Responsible for inspection. should involve in in-process, inward and pre-dispatch inspection activities.2. should have PPAP documentation knowledge.
3. exp. in handling customer complaints, prepare CAPA, ...