1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
Job description:
We are looking for an experienced Structural Draftsman with strong expertise in preparing drawings for lifting beams, spreader beams, lifting frames, and rigging plans. The ideal candidate must be proficient in 2D drafting, 3D modeling, and GD&T, with a solid understanding of fabrication and inspection requirements for below-the-hook lifting equipment.
Key Responsibilities
Create 2D fabrication ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.20 LPA
A PTW Welding Operator (Pull-Through Welding or Portal Type Welding Operator) operates automated gantry or portal-type welding systems—typically utilizing Submerged Arc Welding (SAW) technology—to manufacture heavy structural steel components like H-beams and I-beams in pre-engineered building (PEB) and fabrication plants.
Job Purpose
To set up, operate, and monitor automated pull-through or portal ...
- Ptw Welding Operator
- Welding Operator
- Welder
- Industrial Welder
- Production Welder
- Fabrication Welder
- Structural Welder
- Pipe Welder
- Plant Welder
- Steel Plant Welder
- Maintenance Welder
- Mig Welder
- Tig Welder
- Arc Welder
- Gas Welder
- Stick Welder
- Smaw Welder
- Gtaw Welder
- Gmaw Welder
- Fcaw Welder
- Mag Welder
- Co2 Welder
- Submerged Arc Welding Operator
- Heavy Fabrication Welder
- Pressure Vessel Welder
- Boiler Welder
- Pipeline Welder
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
15.00 LPA TO 25.00 LPA
Location: Raipur, Chhattisgarh
Experience: 15 to 20+ Years
Qualification: B.E. / B.Tech in Mechanical or Metallurgical Engineering
Industry: Steel Manufacturing / Heavy Rolled Products / Structural Steel
Operations Leadership: Direct end-to-end hot rolling mill and structural finishing operations, ensuring optimal daily output, high capacity utilization, and adherence to production schedules.
Yield & Cost Optimization: Monitor ...
- ⚙️ Core Technical & Mill Operations Keywords Hot Rolling Mill (hrm) & Rolling Operations Structural Steel Manufacturing (tmt Bars
- Angles
- Channels
- Beams
- H-beams) Reheating Furnace & Furnace Efficiency (fuel-to-steel Ratio) Mill Stand Configuration (roughing
- Intermediate
- Finishing Stands) Roll Shop Management & Roll Pass Design Cooling Bed & Shear Line Operations Capacity Utilization & Tonnage Per Hour (tph) 📈 Yield
- Quality & Maintenance Keywords Rolling Yield Optimization & Scale Loss Reduction Scrap Minimization & Process Efficiency Bis / Astm / International Quality Standards Total Productive Maintenance (tpm) & Preventive/predictive Maintenance Heavy Hydraulics & Centralized Lubrication Systems Mechanical Testing (tensile
- Bend
- Rebend) 👥 Leadership
- Business & Financial Keywords Plant Head / Mill Head / General Manager - Operations P&l Management & Cost Control Production Planning & Control (ppc) Manpower Handling & Union/labor Relations Erp Systems (sap Pp
- Mm
- And Pm Modules) 🛡️ Safety & Compliance Keywords Ehs (environment
- Health
- And Safety) Hot Metal Safety Protocols Factory Act Compliance & Statutory Norms State Pollution Control Board (cecb / Pcb) Norms
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
15.00 LPA TO 25.00 LPA
Position Title: Manager - Quality Control (QC) / Head - QA/QC
Department: Quality Assurance & Quality Control (QA/QC)
Location: Raipur, Chhattisgarh (or plant site)
Reporting To: Head of Operations / Plant Head / Corporate Quality Head
Mill-Floor Quality & Process Inspection:
Monitor hot rolling processes, dimensional accuracy, and surface finish of rolled structural profiles (angles, ...
- 🔬 Core Quality & Testing Keywords Qa/qc Management & Quality Assurance / Quality Control Metallurgical Testing & Chemical Composition Analysis (spectrometer) Mechanical Testing (tensile Strength
- Yield Strength
- Elongation
- Bend/rebend Tests) Universal Testing Machine (utm) & Metrology Dimensional Accuracy & Tolerance Inspection (angles
- Channels
- Beams
- Tmt Bars) Rolling Defect Analysis & Root Cause Analysis (rca) 📜 Standards
- Compliance & Certifications Keywords Bis Standards (bureau Of Indian Standards) & Astm / Iso / Is Codes Iso 9001 Quality Management System (qms) Third-party Inspection (tpi) Coordination (sgs
- Bureau Veritas
- Rites) Non-destructive Testing (ndt) (ultrasonic Testing
- Magnetic Particle Inspection) Capa (corrective And Preventive Action) & Non-conformance Reports (ncr) ⚙️ Plant & Mill Process Keywords Hot Rolling Mill Quality Control Billet & Raw Material Inspection Laboratory Management & Equipment Calibration Erp Systems (sap Qm Module - Quality Management) Six Sigma / Lean Quality Tools 👥 Leadership & Management Keywords Quality Manager / Head - Qa/qc / Qc In-charge Team Leadership & Shift Qc Management Customer Audits & Vendor Quality Assessment
5 Opening(s)
0 To 1.0 Year(s)
1.44 LPA TO 1.80 LPA
A CNC Operator in a tower manufacturing company (e.g., telecom towers, structural steel towers, wind towers) is responsible for setting up and operating Computer Numerical Control machinery to cut, drill, and shape heavy structural steel components. They interpret blueprints and engineering specifications to fabricate large metal parts while adhering to ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.20 LPA
A Sales Executive for Steel Structures generates leads, secures orders for structural products (beams, channels, plates), and manages client relationships with contractors and developers to achieve sales targets. Key duties include site visits, negotiating contracts, technical coordination, ensuring timely material delivery, and payment collection.
Key Responsibilities
Business Development: Identifying new projects and generating leads ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 5.00 LPA
Job Location- warje Pune
JOB DESCRIPTION
Client of Cygnus Staffing Solutions, a leading Manufacturing Company into Dairy Engineering,
which has been taken over by a German Company, looking for
Site Engineer
Responsibilities:
Structural & sheet metal fabrication with erection- supporting structure, column-beams, conveyer, truss,
plate-rolling(ducts), chutes, cyclone, hopper, compressors etc. Machinery and equipment erection.All piping(SS, MS)fabrication and ...
1 Opening(s)
0 To 4.0 Year(s)
1.00 LPA TO 8.00 LPA
Structural & sheet metal fabrication with erection- supporting structure, column-beams, conveyer, truss,
plate-rolling(ducts), chutes, cyclone, hopper, compressors etc. Machinery and equipment erection.All piping(SS, MS)fabrication and erection for the plant.All tanks (SS, MS) fabrication and erection for the plant.Motors and pumps installation for the plant.Maintenance of Motor & bearing lubrication, shaft, coupling, ...
1 Opening(s)
0 To 1.0 Year(s)
2.00 LPA TO 4.00 LPA
tructural & sheet metal fabrication with erection- supporting structure, column-beams, conveyer, truss,
plate-rolling(ducts), chutes, cyclone, hopper, compressors etc. Machinery and equipment erection.All piping(SS, MS)fabrication and erection for the plant.All tanks (SS, MS) fabrication and erection for the plant.Motors and pumps installation for the plant.Maintenance of Motor & bearing lubrication, shaft, coupling, ...