1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.24 LPA
JD for VMC Jr. Programmer
Designation : VMC Jr. Programmer
Qualifications : Diploma Mechanical+ CNC/VMC Program.
Experience : 2 To 5 Years
REQUIREMENT FOR JR.PROGRAMMER
FIXTURE DESIGNING FOR DIFFERENT JOB
DRAWING READING
MACHINE SELECTION FOR AS PER DRAWING
HOW MUCH SETUP REQUIRED AS PER DRAWING
SYMBOLS AND GAUGE IN DRAWING
TOOLING KNOWLEDGE AND ITS PARAMETER
CORRECT WORK OFFSET USE IN MACHINE
CAD / CAM ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
1.00 LPA TO 4.00 LPA
Optimizing plan performance and meet production/ dispatch targets with quality commitments.
Possess Greenfield project handling experience in Automotive, Aerospace & Heavy Engineering
component machining line planning, execution, and establishment.
Demonstrate in Production Planning ,Production System Implementation, Process Improvement
,Production schedules,Production development, Managing tool life, Quality control& Inspection,
ISO/TS system,AS9 100,FM EA, AP QP, TPM, FAI ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
knowledge about Selection of tools according to operations
Knowledge about Operating and ProgrammingCNC &VMC machines.
Knowledge aboutJob settingCNC &VMC machines.
CNC & VMC programming & of Fanuc and Mitsubishi controls etc.
2D Programming on VMC.
All Machine Shop Dept. Problem-solving
Programming of new parts
Managed and supervised CNC & VMC Operators.
Programmed and set up machines to produce ...
4 Opening(s)
1.0 Year(s) To 2.0 Year(s)
Not Disclosed by Recruiter
Position- Design Engineer D&D
Skills : Creo 2.0 & PLM/Windchill
Qualification:
BE(Mechanical) & (Electrical) with first class throughout ( no gap in education and profession)
Gender: Male
Opening- Mech- 3 nos & Electrical- 1 no.Experience: 1-2 years experience in design; Compulsory knowledge Creo & PLM/Windchill.
PLEASE NOTE THAT IF CANDIDATES ARE SHORTLISTED, THEN THEY HAVE TO COME ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.00 LPA TO 3.00 LPA
The preparation of the companies QA manual control and supervision of all amendments and revisions.
Control and the distribution of all the companies quality documentation.
Monitor all quality related activities on the project.
Perform all internal and external audits on behalf of the companies management
Verify contractor quality requirements are specified to vendors and ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 5.00 LPA
Knowledge Mechanical maintenance of VMC and HMC , grinding machines, CNC machines, Robotic Washing ,CNC Washing, Honning Machine, central coolant system.Knowledge of fixture (machine shop, Engine assly & testing/dressing) of engine shop
Knowledge of Replacement of spindle, ATC unit, Hydraulic and pneumatic circuit diagram reading and diagnosis. Spindle run out correction ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
2.00 LPA TO 3.00 LPA
Knowledge Mechanical maintenance of VMC and HMC , grinding machines, CNC machines, Robotic Washing ,CNC Washing, Honning Machine, central coolant system.Knowledge of fixture (machine shop, Engine assly & testing/dressing) of engine shop
Knowledge of Replacement of spindle, ATC unit, Hydraulic and pneumatic circuit diagram reading and diagnosis. Spindle run out correction ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
4.00 LPA TO 4.50 LPA
Qualification - 1) Diploma (Mechanical) / B.E. (Mechanical) if the candidate is open for Travelling.
Would be responsible for machine installation and service support with reference to Mechanical Side.
Should have experience of working on VTL, Double Column, Sliding head, HMC machinery.
Plant Maintenance candidates with experience of CNC or HMC machinery who are open ...
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Knowledge of safety regulations
Familiarity with quality control procedures
Ability to read and interpret Mechanical Drawing & Reading.
Excellent communication and interpersonal skills
Aptitude for troubleshooting and resolving issues.
Strong knowledge of machining practices, methods and tools used.
Ability to write CNC programs and have functional knowledge of CNC operations required.
Solid background of demonstrated multi-discipline leadership, ...
3 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.00 LPA TO 3.50 LPA
Soft Skill Machine Shop Shift Incharge (2 Candidate)
Knowledge of safety regulations
Familiarity with quality control procedures
Ability to read and interpret Mechanical Drawing & Reading.
Excellent communication and interpersonal skills
Aptitude for troubleshooting and resolving issues.
Strong knowledge of machining practices, methods and tools used.
Ability to write CNC programs and have functional ...